Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Recommended Posts

Spared no expense, Race Ready

This a YFZ 450, This quad was built to run the pro am production class, however it was only built to be used as a backup. The bike has never been raced. I had the quad custom built by BBM company in Illinois. Its a stock frame with a full gusset kit and powder coated flat black. The front a-Arms are roll design with elka shocks with both rebound and compression adjust with high low. The rear has a roll design swing arm with elka too. RPM axle, Hardcore hubs on front. Full Bore yellow plastic. Has tag handle bars. Also has oversized radiator. all electronics have been removed and is kick-start. Comes with hiper wheels and Hoosier tires. The motor is a TC ported motor on carburetor and completely fresh with no hours at all on it. The bike has not been wrecked and frame is completely perfect condition. This is a fast quad and if you are looking for a sweet turn key MX quad with all the options this is it. This bike is ready to go to the MX track all you need to do is put numbers on. If you would like to see more pics just let me know. Asking $12,000 well over $16,000 invested and bike is basically brand new all around. call or text 217 474 3294

IMG_1858.jpg

IMG_1858.jpg.bdd75f75e48a33d1473deee9557a7040.jpg

Share this post


Link to post
Share on other sites


thats a nice bike, its just not for my taste, i prefer jacked up, big tires, and deep mud, i will show this listing to a friend later this afternoon

ok thanks, any questions just let me know

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Rich1028
      Leota Quad Trails
      4-5-20
       
       
    • By LOGAN WARNER
      Hello everyone, I’m new to this forum. I have a 98 king quad 300, I cannot get it to run right. It will start up and run for a little bit but then it starts sputtering when you give it throttle. It appears to me that it is getting to much fuel. 
      this is what I have done to it: new carburetor, new fuel filter, adjusted the valves.
    • By JacobSlabach
      I have a gentleman that asked me to service his bayou for him.  I have always wondered what oil should be used in atv engines?  Pros?  Cons?  What weight should be used in what type of weather?  Is there one kind that I could bulk buy and safely used in any quad I worked on or owned?  What about performance?  Engine Life?  This has always been a 🤔🤔🤔 area for me with quads as far as why you would use one type of oil over another....
      Thanks!
    • By Dwight Williams
      Ok, so I bought this scream of a deal the other day - a 94 King Quad 300 for $40.00.  It's been sitting outside with no carburetor on it for about a year.  Its rusty, missing some parts, wiring is all cut up and spliced etc.  No seat, no racks but the plastic is all there minus the headlight housing.  Anyway, who can pass up a $40.00 quad right?  I get it home and looked at the sight glass for oil level, it's about 1/2 oil and 1/2 water.  I drain it, refill it and turn the motor by hand (recoil starter is missing) and it turns over just fine.  I worked on the wiring for about an hour and got it to turn over with the electric starter and got enough of it sorted out to get a spark.  Did a quick compression test, 70 lbs.  Wet test bumped it up to 90.  Ok, so rings and cylinder washed out with water for a year, not too surprised.  I thought 'what the hell' and sprayed some starting fluid in it and it ran for about 2 seconds - enough to show  it's got life.  Since then the compression has gotten worse, I can't get enough pressure to activate the carb diaphragm, therefore no fuel pump either.  The compression is now around 60.
        Anyway, my question is....is it worth it to try to get this thing going?  I tore the top end down today and the cam and one of the rockers is pretty worn.  I figured a top end job would be about $100 or so, depending on the condition of the cylinder but I'll probably have to put a cam and rockers in it as well.  Doing some research on ebay I figure I'll have to spend about $500-$700 to make the whole machine right again.  Much less just to make it run and use as-is but I won't really like it until it's right.  I don't mind doing the work, I actually enjoy it but I'm concerned about what all that water did to the rest of the internals, I can't really test it all out until I can make it run.
      I know it's a basket case but I'm not into it much at all, even if I do the top end and find something else wrong I'm still not out much.  I'm leaning toward ordering the top end parts and going from there unless you can convince me otherwise - any way to check the rest of the internals without tearing it down?  I plan on flushing the oil cooler before I do another oil change, I've drained it twice now and it gets milky almost immediately just turning the starter - I suspect the oil cooler is polluted badly.
       
      I'll get some pictures today if anyone want to see them.
       
      thanks!
  • Similar Tagged Content

    • By Michael Aiken
      Where can I find a wiring diagram for my 2005 450 Kodiak. Thanks.
    • By Kristpj
      I know this tooic has been addressed by many, I’ve looked through many forums and pages. I did not find anything like the problem i have.
      I have a 2007 Kingquad 450. I have a new fully charged battery. When i turn the key, the dash flashes and seems to struggle before getting fully lite. We can hear a small relay near the computer clicking, i think it is the fuel pump relay. When i turn off the engine kill switch and press the starting button relays click and all the power shuts off, i turn the key off, engine kill switch then start over, power is there. Atv will start with pull start, but not elextricly. if i try to use my winch, all power cuts and engine dies. 
       
      Can anyone tell me what it may be? or has anyone fsced an issue like this before?
    • By chuckufarlie
      I have a 2018 Kodiak 450 EPS that just this past Sunday I ran through a bit of water.
      After the puddle the belt was slipping, so I pulled over and drained the ultramatic housing and the slipping problem went away. This was all in L and everything seemed to work fine. Later when I got on a road, I put it in H, but it still rode like it was in low... i.e. I had to rev it up a lot just to get to 30mph.
      When at home I pulled the ultramatic cover off to inspect, and it looked okay in there. Not much dirt, belt and everything are clean, but when I rev up the engine (with cage in place, of course), the belt doesn't get to the top of the clutch (maxes out about an inch or 1.5" from top of clutch, so maybe it is normal).. I put it back together but same thing... H seems like L still.
      Do you think the clutch needs to be further dissected for cleaning, or could this be an issue with the gear selector?
       
    • By Steven Alter
      I have a 2018 450 and the digital gause has started flashing on an off while driving. The backlit also goes on and off. It is worse when I hit the gas. The battery died a few weeks ago and I jumped it but its been fine until last night. Called the dealer and showed them a vid and they recommend replacing the gauge and its like 600 bucks. The machine has less than 100 hours on it. I would really hate to have to change it out. also the unit sometimes has trouble starting. Any ideas?
    • By Admin
      View File 2014 Arctic Cat 450 ATV Service Manual
      2014 Arctic Cat 450 ATV Service Manual
      Submitter Admin Submitted 02/08/2019 Category Arctic Cat ATV  
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...