Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Recommended Posts

The Land Report:

As the Gulf Coast Quad Racing Association (GCQRA) continues its 2007 Pin It to Win It Series, the number of racers continues to grow and the faces on the podium continue to change.

With Round 1 and 2 Expert champion, Chris Brian sidelined with a serious neck injury, the first place money was up for grabs and the top riders in the area duked it out with some spectacular motos capped off with wins in round 3 by Craig Porter and Round 4 by Steven McBride. McBride fought off Media All-Star Austin Wilson at Beaumont MX in one of the better head to head matches of the day. These two exchanged stickers and phone numbers for the entire 6 laps of the expert main.

Travis Beyner beat out rounds 1 and 2 A class winner Ryan Callahan for the top shelf on the podium for round 4 while Marco Castillo took round 3. In the Sport Quad class, WPSA supermini racer Cody Land took his first win of the season in dramatic fashion over teammate and best friend, Tyler Webster. The Sport quad class is one of, if not the, most competitive class in the GCQRA with terrific battles among racers Garrett Baker, Cody Bales, Brent Sellers as well as Land and Webster.

In the B class, Skyler Jancowiak continued his dominance of the class with the win in round 3 while WPSA racer Josh Bateman took the W in round 4. Little Ty Cruse has established himself as the one to beat in the Stock Mini class with dominate wins in all 4 rounds.

With the growth of our women’s class, the gals are putting up terrific matches among front runners Debra Mercado and her daughter Curren as well as Angela Bryant and Kayla Melder.

The GCQRA is honored to have our season underwritten and sponsored by Honda of Houston and we welcome all those in the area to come out and experience not just the race but, the entire weekend’s festivities! Come experience the best show on dirt!

_________________

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Dra O
      posted a while back - it was running at one point - I have all the plastic shroud off - it's down to frame and engine now
      -fuel pump: when line from petcock is attached, no fuel comes out other side to carb; the line to the carb is open (can blow through it); I thought when I cranked engine that the pump would spit out fuel on other side but it does not; I removed fuel pump and opened it up - diaphragm looks good - but internal areas had lotsa calcification build up - I cleaned this out and dried it good - the clear plastic pieces (?diaphragms) aren't broken - the spring w/ steel ball on end moves freely; am putting it back on tomorrow; but can anyone answer about the pump? isn't it supposed to pump fuel through it... to other side... to carb? puzzling
      -along with fuel pump: I replaced petcock 3 weeks ago (gas tank had rusty fuel in bottom - cleaned it out prior to new petcock); when I turn petcock arrow NOT to on or reserve, fuel comes out of line; when I turn it to on or reserve, fuel doesn't come out; puzzling
      -I don't know what's on back of fuel pump - it's a valve that has a hose coming out of it - looks like it goes to engine/carb - I haven't traced this out yet - what is it?
      -can squirt gas on air filter and engine will run for 2-3 seconds then stop - fuel in top of carb (under diaphragm) does same
      -it likely needs carb rebuild - will get to this - but something isn't allowing fuel to get from fuel pump to carb
      -I THINK it has a mikuni model x carb - diaphragm is ID 26mm  OD 68mm - hard to find inexpensive diaphragm, I guess because it's a model x
      -last thing - I replaced solenoid due to old one clicking; I HAVE to be charging the battery or it won't start/turn over - battery just goes dead; but if charging, it'll turn over nicely; i'm guessing it's a bad battery
      -any help appreciated - I've never owned an ATV before - inherited this beast from grandparent in-law
    • By Ed Zeppeli
      Hi,
      Oddly I'm having  a hard time ordering front brake shoes for my '98. 
      I'd appreciate recommendations on decent, widely available shoes if possible. Ideally available in Canada on short notice.
       
      Thanks much,
       
      Warren
    • By Rich1028
      Leota Quad Trails  on New to us  Machines 5-10-20
      We Just Picked up two Quads Friday,and we took them out riding,great machines!
      2008 Honda 400 Ex and a 2014 Honda 400 X

       
       
    • By hornythrony
      Hey I have a 07 king 700 there's lots of times that the quad will stall when the fan turns on also have to bump motor 2 or 3 times before starting to start it (makes fuel pump go on 2/3 times) anyone having or had this issue?
  • Similar Tagged Content

    • Guest Fox300exchic
      By Guest Fox300exchic
      The Hop-Up: You may be saying to yourself, “that’s a chick bike,” and you’re right. But honestly, it’s so much more than that. It’s one badass bike. http://www.quadmagazine.com/quad/features/article/0,24942,1587044,00.html
    • By katasha2
      I took apart the carburator to clean out and I can't remember exactly where the springs that are inside the float are supposed to go I've tried to look up schematics but I think I am missing a spring maybe need helpt:confused::confused:
    • By skgw1
      Feul pump went out. Replaced. At times quad cuts out like its not getting gas. Saw article on new pump needs to be calibrated. Told how to go into a service mode. Does not tell how to calibrate after going into mode. Can anyone shed light on this procedure.
    • By Bwdeaton
      I recently picked up a king quad 700 that doesn't run in the hopes of getting it running by spring. It had been previously taken apart some and a few pieces are missing in the engine, but the frame is complete and in good condition. The motor will need a piston, rings, cylinder, cams, and a few misc parts that are missing. Also the cases will need to be split to remove the pieces of piston that are in the crankcase. The piston blew up at high rpm and did a number on the cylinder so I'm trying to find out if it would be worth rebuilding this motor it buying another engine to swap in. There may be more damage to this engine that I can see so I was wondering how bad the insides of it could be considering it destroyed the piston. I have found a motor for 1200 plus 200 shipping, the only problem is I don't have that much now and I would have to save up a while before being able to afford it. Any suggestions appreciated.
    • By superdude811
      Can you put tracks on manual atvs? would it be effective? is 280cc enough to even move them? thoughts/suggestions?
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...