Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

wizardsmark73

1995 Polaris Xplorer 400 idle and run issues

Recommended Posts

Hey guys could use some help here. Have polaris 400 95' dang thing no matter what i doe for adjusting the carb still does same thing. Cleaned it thoroughly. Seems to start fine when choke is open but as soon as i take it off it revs up for a second then just dies. Plus doesnt seem to idle properly. Have adjusted the idle screw and air fuel screw to no end still have same problem. Need help anyone? Anyone?

Share this post


Link to post
Share on other sites


You are going to have to take the carb apart and clean it wit compressed air to make sure every fine particle of dirt is out. I worked on one all afternoon tearing it apart 4 times before I got it to work right. As for it accelerating when you close the choke means it is sucking air from somewhere and then stalling out. Make sure you are not missing any parts when you put it back together. Try to get a manual if you can.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Tiffany Rowland
      I bought an 07 honda trx400ex for my daughter 11th birthday. I've been having alot of fun fixing it up but after reading some of the posts about safety I think I may have gotten a little carried away. I put an exhaust on that added 10hp, a k&n performance filter, new carb, a stage 3 rev box and coil, and I wrapped the exhaust. The top speed started out at 92mph and we're well above that now. My main concern, though, is low end throttle. Is there any way I can do something thate will decrease the rate of acceleration without taking off the modifications I've done? She's super cautious and won't go over 10mph but I'm worried that she may have a hard time controlling it after these last few upgrades. 
    • By fox300exchic
      Let's hear all there is to know about you ladies! Where your from and where you've lived. Kids or no kids. What you do for a living. Why you ride and how you got started.
    • By Flipper Tiffany Roper Jones
      All I have been through everything. Bought brand new.
      Throttle safety switch 
      Cam and rockers
      ECM
      Carborator
      Stator
      Fuel safety switch 
      Battery
      Everything every forum has spoken of I've bought sealed airbox completely tight unplugged black wire on trans. I have literally done everything in the book.Checked oil today full of gas anyone no anything what might b wrong. Next I'm taking head off and making sure valves seat any ideas.
    • By Christian Smith
      Recently bought a Polaris 425 Xpedition. Main issue is that the quad randomly misfires sometimes. ONLY does it at idle. Everything sounds good. What should I look for? Haven't checked the plug, seems a bit hard to get to, not sure. Headlights flicker at idle as well, is this a sign of a weak stator? Help? 
    • By Arizona
      Went shopping on Saturday, picked up another Kawasaki Bayou 220 and a Yamaha Timber Wolf 250
      I really should sell some of these but they are a lot of fun to find, fix and ride
      Of course neither of them run but that's part of the fun!  Az



  • Similar Tagged Content

    • By RoxanneRoseReid
      Need a polaris manual for a 1994 2 stroke 2/4x4 quad free. can you please post a link I can click on Thank you. Roxanne
    • By Wonderwoman
      Hello, well back to where I was last year with this carb. Took my 250 to the mountains for the first time this year and blue smoke, too much gas again. I can't believe that this carb gives me this much trouble. Seems like the choke is stuck but the cable moves freely. Anyone else ever experience this issue? Do you think a new choke cable would maybe resolve this?http://www.quadcrazy.com/atvforum/images/smilies/arghh.gif
      OK it was the choke. Put on all new cable and plunger and she is running 100% again. So now the question is, is the carb getting worn out where the plunger needle goes in the small hole and when I use the choke the needle end doesn't get lined back up with the hole?? We'll see how it runs and now that I know what the issue is I can always pull the choke plunger out and reinstall if I start having this issue again.
    • By buzzar56
      I am looking for a free repair manual for a 2003 Polaris sportsman 500 ho atv. all the posts on here lead me noplace
      thanks fred.
    • By bodatiouskid
      Have a 2002 Polaris Sportsman 700 that only has 34mi. on a carb & ring job.
      Cut the gas off today to drain carb.Now engine will not idle.If I open throttle will run,but let off & will cut off.Can screw idle in with no change.
      What happened? Why did this happen when fuel ran out?
      Please help me,my ATV is a daily driver.
      Please help!!
    • By Weldingrod47
      Trying to change front wheel bearings. I removed the cotter pin and castle nut. Hub won't budge. Is there an additional retaining clip? Seems to be one of those push on type that barbs on the thread of the spindle. How do I remove it?
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...