Join Today, It's Simple and FREE!
As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery. Registration is fast and you can even login with social network accounts to sync your profiles and content.
It appears that the Service Manual thread at top of forum is dead as all the links no longer work. I'm actually looking for service manual for a 2000 KVF300 Prairie that I just picked up. Does anybody have link to one that they can share, or know where I can find one? Thanks in advance for any help.
I saw this article on Motosport and thought it was pretty good. Anyone add anything?
You might think hopping on-board an ATV and going for a spin is just as easy as taking your regular 4-wheel car for a ride around the block. After all, both have four wheels. How hard could it be?
In many respects, you're right. Some adventure riders choose quads over their two-wheeled counterparts of the dirt because there's less chance of crashing and it's easier to learn. ATVs also offer more manageability for younger riders to get acquainted with outdoor riding than a dirt bike.
However, beginner riders on ATVs tend to make the same mistakes that result in crashes, roll overs and injury that could be avoided with some instruction and know-how. If you're looking at a fun family outing by renting ATVs or want to get into the sport take advantage of the following points and avoid the same mistakes so many other first time ATV riders make that end their day early or before they barely get started.
1. Nerf Bars
Get Nerf bars. These are not soft cushy add-ons that are cousins to the football you use during backyard football games. In many respects, Nerf bars are gigantic foot pegs. Don't bother with traditional foot pegs because you'll constantly slip off and because of the "I feel safe factor" that comes with riding a quad you'll also have a tendency to let your feet drag when riding. That's a recipe for getting one or both of your feet caught in the back tire resulting in serious injury. Nerf bars allow you to stabilize your feet and get maximum control over the ATV
Rest your feet easy on Nerf bars
2. Rolling Over
Believe it or not, it's fairly easy to roll an ATV over. And you don't want to be on the bottom of that sandwich.
The most common way of ending underneath a quad is looping out. That's done by hitting the gas and having little to no experience with the power of an ATV. The front spikes up like an out of control stallion, throws you onto your back like a bucking bronco and then pins you like a UFC Champ.
The second way is when you're having a bit too much fun sliding around in mud or other slick conditions, the tires finally do what they're designed to do and grip the ground but the rest of the bike, with you on it, keeps going.
Finally, those who think they've found their bearings take aim for a steep slope and try to conquer it only to end up upside down or in their attempt to arch alongside said steep hill, tumble over the side.
3. False Sense of Security
This goes somewhat hand-in-hand with the roll over capability that many riders fail to appreciate therefore they also neglect wearing proper protective equipment. Don't think wearing jeans, t-shirt and sneakers is adequate protection when riding a 4-wheeled machine powered by a gas engine that doesn't have seatbelts. You need a helmet, goggles, gloves and riding boots at a minimum. Once you start ripping it on the track or trails add a chest protector, neck brace, knee brace, etc.
4. Throttle Control
Everybody wants to skip the kiddie stage and get right into hair-raising speed when it comes to riding ATVs. OK, most everybody. But for those who do so many put on the cloak of invincibility and think a quad is merely a mini car that finally enables them to release all sorts of pent up childhood inhibitions.
So they jab their thumb into the throttle with the expectation of a controlled roller coaster ride. Instead, they loop out and end up underneath the quad or manage to stay seated only to careen off course and introduce their 4x4 to a large tree. ATVs normally have a thumb throttle and most have an automatic clutch so the clutch is one less thing to worry about. So go slow and figure out how much "thumb" is too much and get used to the speed and power an ATV delivers before really going for a ride. Oh, one more thing, learn to take your thumb off the throttle!
It's not to hard to loop out on an ATV
5. Loading the ATV
Never, ever ride an ATV up a ramp into the back of a pick-up. If you want to know why just go to YouTube. If you want to know how to load an ATV check out this fine piece of quality information on How to Load a Motorcycle, Dirt Bike or ATV into a Truck.
The bottom line to riding an ATV the first time is treat it like you would anything that comes with a modicum of danger. Careless behavior endangers you and others but with common sense and a willingness to learn you'll enjoy of lifetime of riding quads.
For additional information on riding and/or maintaining ATVs see:
10 Quick Safety Tips for ATV Trail Riding Tips for New ATV Owners Choosing the Best ATV for Beginners 10 Things That Alter Your ATV Performance Written By: AndrewT
Similar Tagged Content
How hard is it to change the outer seals on the rear differential mine are leaking fluid and I have no idea on how to change them out any help would be great thanks
Turn on key, put it in Neutral, lights on steering column light up. NO head lights and the electric start switch will not work. Let is sit for a few hours, started right up. Sat over night and same issue. Checked fuses and they were good. Battery is giving 12 volts. Opened up the ignition assembly and it isnt getting any power it comes up as a .01 on the volt meter. Pulled the spark plug to check for spark and NO spark. Will not pull start either. Unhooked the battery checked the spark while trying to pull start it and got a weak spark.
Pushed it into the garage and it sat for 2 days. Turned the key and pushed the start button and it cranked but the spark plug wire was off so plugged the spark plug back in and pushed the start button and nothing. If you jump the solenoid it will crank over but not start. Soo confused , anyone have any ideas?
Hi all...new member here...looks like an awesome site! I searched around, but couldn't find a service manual for an 02 Prairie 650. If someone has one we could download, we"d really appreciate it! We"re needing to replace the front cylinder and head, etc. for this new machine we just bought.
All responses appreciated. Thanks much!
I recently bought a 2002 prairie second hand for 2000$ .. just for the record it has 28 inch zillas on it .. anyway . whenever i put it in any gear , it takes a second for it to engage ... and when it does it clunks into gear ... is that common for that quad for that year ? or is it cause the previous ower didn;t replace the clutch springs to heavier duty ones ?
Recently Browsing 0 members
No registered users viewing this page.