Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

jonathanhayden

noob with a 88' big bear

Recommended Posts

so im new to ATV's and i purchased a 24 year-old quad with only 500 miles on it from an old man. it has never even been off road not one scratch on the skid plates or frame anywhere, he just used it to taxi his boat to the lake. and it has sat for like the last 5 years.

so my question is, is there any necessary maintenance anybody can think of before i take this thing on a long ride. it appears to have sat with the fuel valve in the open position the whole time....(its impossible to turn without large pliers). i changed the oil and it seems to run great.

ill put up a pic soon.

Share this post


Link to post
Share on other sites


I would drain and replace the fluids. The fuel system is probably gummed up so the carb will more than likely need to be taken apart and cleaned good. The battery of course. Check for any rust or corrosion on connections. Check all the grease fittings and make sure it is lubed up. Make sure nothing is leaking. First time out take it easy and let it break back in to make sure of no leaks or other problems. Anything that is rubber check for dryrotting. Thats all I can think of right now.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Dra O
      posted a while back - it was running at one point - I have all the plastic shroud off - it's down to frame and engine now
      -fuel pump: when line from petcock is attached, no fuel comes out other side to carb; the line to the carb is open (can blow through it); I thought when I cranked engine that the pump would spit out fuel on other side but it does not; I removed fuel pump and opened it up - diaphragm looks good - but internal areas had lotsa calcification build up - I cleaned this out and dried it good - the clear plastic pieces (?diaphragms) aren't broken - the spring w/ steel ball on end moves freely; am putting it back on tomorrow; but can anyone answer about the pump? isn't it supposed to pump fuel through it... to other side... to carb? puzzling
      -along with fuel pump: I replaced petcock 3 weeks ago (gas tank had rusty fuel in bottom - cleaned it out prior to new petcock); when I turn petcock arrow NOT to on or reserve, fuel comes out of line; when I turn it to on or reserve, fuel doesn't come out; puzzling
      -I don't know what's on back of fuel pump - it's a valve that has a hose coming out of it - looks like it goes to engine/carb - I haven't traced this out yet - what is it?
      -can squirt gas on air filter and engine will run for 2-3 seconds then stop - fuel in top of carb (under diaphragm) does same
      -it likely needs carb rebuild - will get to this - but something isn't allowing fuel to get from fuel pump to carb
      -I THINK it has a mikuni model x carb - diaphragm is ID 26mm  OD 68mm - hard to find inexpensive diaphragm, I guess because it's a model x
      -last thing - I replaced solenoid due to old one clicking; I HAVE to be charging the battery or it won't start/turn over - battery just goes dead; but if charging, it'll turn over nicely; i'm guessing it's a bad battery
      -any help appreciated - I've never owned an ATV before - inherited this beast from grandparent in-law
    • By StolenATV
      Trailer loaded with four wheelers attached to truck in front of our house, . They pulled receiver out spun it around and left.. Came home no trailer or 4 wheelers.
      The post 2 ATVs and trailer stolen appeared first on STOLEN 911.
      View the full article
    • By pcumby
      Hi guys I'm in the market for a new ATV.  I narrowed my choices down to King quad 750 Grizzly 700 and Rubicon 520,  I own a 2006 500 Rubicon right now and I like the reliability and power for plowing.  However it is not a capable ATV.  When quading with other guys it falls short with ride quality and ground clearance.   I also have a 500 King Quad 2015 which I like and will keep it for my wife.  It is very strong and reliable also.  However my plan is to sell my Honda Rubicon and replace it with a 2020 of one of the these mentioned above.  Can anyone give me their take on one or all of these machines and why you picked what you picked?
    • By Ajmboy
      View File 2018 Textron Off Road Alterra 500 Service Manual
      2018 Textron Off Road Alterra 500 Service Manual
      Submitter Ajmboy Submitted 12/16/2018 Category Textron Off Road ATV  
    • By DUBLT
      Looking to purchase a windshield for my ATV, suggestions of what to buy with quality in mind and will fit without doing any modifications. 
  • Similar Tagged Content

    • By YamahaBB350
      I have a Yamaha Big Bear 350 and the reverse doesn’t work, it shifts from low to high easily but it won’t go back to reverse. I’m new to this stuff, so I’ll take any help. Any ideas? 
    • By Christopher Williams
      Hello all, 
      i just rebuilt the top end of a 99 Bear Tracker 250 and it can’t get it to hit off of gasoline or starter fluid. Occasionally it will backfire. Right now I’m just trying to get it to fire off without the carburetor like I’ve done a thousand times before with other engines. Usually there is no response, but occasionally I get a backfire through the intake. ISeems like it’s out of time, but I don’t see how that could be possible. 
      Here’s what I know:
      1. compression 120psi
      2. all timing marks are lined up after numerous revolutions. 
      3. Strong spark. 
      4. Valves adjusted correctly. 
      Thanks in advance. 
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...