Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

sidmabb

Synthetic cable on Warn Winch

Recommended Posts

I decided to go with Dyneema cable. My winch has a hole through the drum that widens on the back side. The new cable has no end, it's just cut off. I am worried that I will need a lot of line some day and pull to much out and end up with a cable no longer attached to the winch. I thought about knotting the cable after slipping it through so it couldn't come out but decided against it. I ended up tying a couple shoe strings near the end so I know to stop. I would rather have a better safeguard . What do you guys do?

Share this post


Link to post
Share on other sites


Roller or hawse type fairlead & your winch Mfg. ( mine is warn ) should make a wedge lock that locks the line into the hole in the drum. I had one for mine but lost it. You simply thread the line through the hole in the drum then drive the wedge in from the back side , hence locking the cable to the drum. Hope that helps.

Share this post


Link to post
Share on other sites

Give GoWarn a call they should be able to get u the wedge locks that u need. 1-888-219-0090 you can go to their website at gowarn.com and check them out first.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By raybob
      I have it all but can find where the vacuum line on the carb goes its a 2000 suzuki 500 quadmaster I know where the two vent lines go but not the bigger vacuum line goes it has vacuum on this line. need help. Ray
       
    • By ATVNetwork
      Introducing the 2020 Yamaha XT-R editions of ATV and Side-by-Side vehicles featuring exclusive XT-R features like a factory-installed Warn Winch, advanced suspension, special-edition paint and color-matched wheels with extreme terrain tires, all Assembled in the USA for unmatched Proven Off-Road capability, comfort, and confidence. 
      YXZ1000R SS XT-R: https://yamaha.us/yYXZXTR 
      Wolverine X2 XT-R: https://yamaha.us/yX2RSXTR
      Wolverine X4 XT-R: https://yamaha.us/yX4XTR
      Grizzly EPS XT-R: https://yamaha.us/yGrizXTR
       
       

      View full post
    • By raybob
      replacing carb,, the bigger line on right side top of carb does it just vent to the air,, cant find where to hook it up to also I want to check the oil and gear oil I checked the oil in motor and the rear end my question is looks like allen plug on left side of motor if you are setting on the 4 wheller, ps it hs a oli leak any help would be great. Ray in kentucky
    • By Tiffany Rowland
      I recently purchased an 07 Honda sportrax and when I was checking the spark plug I saw the boot was ripped nearly in half. When I removed the plug it was blackened and covered in oil. How can I thoroughly clean the plug hole and remove any debris that is in there? Is there a small tube like vacuum or something of the sort made for stuff like this? The machine my dentist has would be perfect, maybe they do rentals! 😁
    • By Tiffany Rowland
      I recently purchased an 07 Honda sportrax and when I was checking the spark plug I saw the boot was ripped nearly in half. When I removed the plug it was blackened and covered in oil. How can I thoroughly clean the plug hole and remove any debris that is in there? Is there a small tube like vacuum or something of the sort made for stuff like this? The machine my dentist has would be perfect, maybe they do rentals! 😁

  • Similar Tagged Content

    • By ATVNetwork
      It´s one debate that doesn´t seem to be going anywhere fast. If you´re buying a brand new winch like the Superwinch Terra 45 or maybe it is just time to replace your old cable. Which way do you go: steel or synthetic? Let´s take a look at the pros and cons so you can decide once and for all which is better for YOU.
       
      Life of the Cable
      After an extended period of time depending on use, a steel cable can start to crimp, get rust spots or develop frayed strands of steel cable which can give you nasty cuts and also decrease the reliability of the cable. In the short term, the steel cable can take a lot more abuse than the synthetic variety. However, synthetic cables can have a much longer life. That is of course only if it is taken care of and carefully prevented from fraying on the edges. Fraying edges on a synthetic cable is the beginning of the end for this more costly type of cable. The more affordable steel cables might be more attractive for the rugged wincher who doesn't mind replacing a steel cable at the first signs of wear.

      Potential and Kinetic Energy
      You don´t need to be a science major to recognize the danger of a cable under extreme tension. Whether it is due to overbearing the cable or a replacement cable is well overdue, it can be a potentially very dangerous situation. In terms of this, Synthetic is generally the winner as it doesn´t become a dangerous projectile. It is also easier on the hands and actually provides more pull per inch. Bear in mind however, that your maximum pulling power is still limited by the winch you select. It´s downside is that if it is in contact with a sharp edge, it has the possibility of slicing or fraying the edges, which is very unlikely with a steel cable.

      UltraViolet
      Some users of synthetic cable have made complaints about UV damage causing weakness that leads to a decrease in strength. Newer synthetic lines are being manufactured UV resistant, and a winch cover is also a cheap solution to this problem.
       
      Company Choice
      About 95% of new winches are being shipped by their companies with standard steel winch cables. This can be taken as just because they are the cheaper option of the two for them to make the most profit, or a signal that it is still the best choice of cable.

      Power
      As I mentioned before, Synthetic does provide you with more pounds per inch. Which means more pulling power for less cable. Even though pulling power is generally determined by the winch, check out this article with tips for both types of cables on how to double your pulling power.

      Conclusion:
      Synthetic is the latest and more expensive cousin, that still has a few kinks to iron out before it really replaces steel cables completely. Steel has been proven in every condition. It is tried and tested and cheaper. For reliability and cost, definitely your cable of choice.

      Author:
      Sam is an ATV enthusiast and updates his adventure website with outdoor tips and articles, including a review on the Superwinch Terra 45 (1145220)
    • By Racer944
      Hi Folks;
      Has anybody on here installed a winch on a 2003 Magnum 2x4? I am using a Cycle Country adapter plate (only one I could find), but am having a bit of trouble getting it all to fit properly, and am looking for someone that may have done this install and/or may have some pics of the installation.
      Thanks!
      Eric
    • By toonces
      My mother has just developed a fairly serious case of sciatica, which is a condition where you have some serious leg pain as the result of a pinched sciatic nerve. One of the exercises she does in physical therapy is simply the therapist holding onto her foot and pulling away from her hips as she lays on her back on a table. To replicate this exercise at home they have recommended an inversion table (where you turn upside down and hang from your feet), but since she's not too keen on this idea I'm trying to figure out how to replicate this exercise...which is where the idea of a remotely operated winch comes in.
      I don't really have a wide range of knowledge when it comes to what equipment is out there that can help me accomplish this goal, but I'm not too shabby at designing things and since I just installed a superwinch on my grizz this is the first idea I've come up with.
      Basically I'm imagining using some kind of winch whose rope would be worked through a pulley system that would end attached to a shoe which Mom would put on, lie down and use the remote switch to gently stretch the leg.
      - Winch (if an ATV winch) would be powered by a 12v car battery hooked up to a trickle charger
      - Safety mechanisms would include...
      - a light switch dimmer inline between the 12v battery and the winch so speed can be adjusted.
      - possibly using one of those stretchy rubber exercise resistance bands in the line segment to regulate and ease the pulling
      - a remote power cut off switch paired with the remote 'in/out' switch
      Honestly I could just go ahead and make this system myself, and I'm fairly sure it would work, but I thought I'd bounce this idea off a mechanically minded community to see if there are any ideas how I could improve on the design.
      Since I'm only familiar with ATV winches at this point that's what I've imagined using. But if anyone is aware of a 110v based winch that would be more appropriate, that would surely help in simplifying powering the system since it'll be located indoors. Only requirement for the winch would be that it would need both an in and out function operated by a remote switch. And since the winch would only need to pull between 10-20 lbs it wouldn't need to be nearly as beefy as the ATV type.
      Sorry for the long write up here but I'm certainly glad for your time and open to your opinions and suggestions.
    • By dwint
      my speedometer stopped working on my 91 kq and took the plastic off but how do I replace it when its under the tank and you cant get the tank out unless you remove the engine
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...