Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Recommended Posts

Hey all just got my first ATV. Bought it for 500 dollars and real clean. Carb was stopped up so i orderd a carb kit for it and having problems. After installing everything and started it up it was revin real high after trying to figure the problem out i noticed the plunger wasnt going flush to the bottom. after trying to figure it out i realized somehow the needle does go down it seems far enough but if i remove the clip that goes inbetween the spring and needle everything works right but ive tried to install it on its side and facing up no difference.. can anyone help

Thanks

Derrick

2012-11-05 20.25.13.jpg

57d773427b8ca_2012-11-0520_25_13.jpg.cc553d6ff08c28b3e6e0e115f4d16153.jpg

Share this post


Link to post
Share on other sites


Well if figured it out. When you install this clip on its side bend the tip end inward that way theres no pushing against the carb body and getting hung up

Share this post


Link to post
Share on other sites

Glad you got it and thanks for sharing the solution. I had a bayou and loved it. They are tough machines. I even plowed snow with mine.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By MarkinAR
      What is the opinion on carb kits? What's one of the better brands of aftermarket? OEM is always preferred but not practical, chinese cheapie is never a good option. 
      Thoughts ?
    • By Kaj Colum
      Have a Bayou 400. sometimes when I press the start button i hear the solenoid click but the starter does not engage. Here is the strange thing though, when that happens if I kick the kick start just once then press the start button starter engages normally. Any ideas?
       
    • By josephnbl91
      My four wheeler when i first got it seemed like it was very slow when i first got it and it had no throttle response so i replaced the belt and cleaned all of the rollers thinking that would solve the problem from what i read on the forums. well it turned out that it wasnt. so i went to the next thing i took out the injector to check it out and i seen that there was a tiny bit of debree in it so i cleaned it and it seemed to improve a little bit. but still did not solve the problem. i later found out how to find the trouble codes out from the lcd screen using a paper clip on the diagnostic port and it showed the code which stood for no codes C00. i also forgot to mention that the throttle position censor is working perfect. before i started all of this the four wheeler ran just not to its potential. after my friend and i did the trouble code test the bike wouldnt even start anymore and the injector would spray for a few seconds for the start up then it stops and the fuel injection light comes on and blinks. the four wheeler wouldnt start anymore. i took it over to the local shop and they hooked it up to the computer to see if there was any codes and it still showed it was free of codes. they hooked it up to the fuel pressure gauge and we found that it was making 22 pounds and it should be making around 43. i then bought a new fuel pump and put it in. it now starts and runs for a few seconds and then it stalls out and the fuel injection light comes on again. which then leads me to think it is the ecu now but i want to be sure before i invest around $500 more into it. any opinions on whether or not anyone thinks this is the problem or if they have had a similar problem before would be really appreciated. sorry for writing a novel and not spelling very well. also i forgot to put the year in the title it is a 2007
    • By Frank Angerano
      I would like to hear who uses what to clean there ATV’S. 
      I’ve always been a fan of simple green and it’s always worked well but with this new property and the crazy black mud and clay that’s there  I have to say the simple green is not cutting it. 

      So from cleaning  right after a ride to cleaning them when you find one in a barn I would like to hear what everyone does and what your recommendations. 
      I’m looking to try something new.  
    • By bradleyheathhays
      Last time I installed a remote start system it was on an old Dynasty whose wiring was too delicate to work on really. A couple weeks after installation it started ok but a ton of white smoke came from under the dash. I uninstalled the entire system and everything was fine after that.

      So in picking out a starter for this '02 Taurus I want something simple that will work with this car well. The start systems I'm seeing are generally designed to do door locking and unlocking, trunk release, etc. As this car already has those functions on a fob I won't be using any function on any future remote start system other than the remote start.

      Can anyone with knowledge of my car recommend a decent but low cost / low extra functions start system that would work well with my Taurus?

      Thanks
       
  • Similar Tagged Content

    • By Trenton
      Hello. I am a new member as of today. I had a quick question to ask. I recently was driving mt HONDA RANCHER 2004 GPSscape 400 and my display stopped working. I was driving the atv and all of a sudden the speedometer and the service lights went out. Also the lights stopped working. I am still able to shift gears, change from 2wd to 4wd, and can still select if I want EPS or Auto. I have checked my fuse box and have changed a few of them around. It did not change anything. I was wondering if anyone had any idea of what had happend. Thank you for your time- Trenton 
    • By LTZ-Zach
      So i was riding the other day and my quad randomly shut off. It started back up and ran completely fine for a little while and then it started idling terribly.
      I cleaned the carb and changed all the jets and everything except the float due to the rebuild kit not coming with one and it actually runs worse then it did before.
      It will run and idle decent now but when I give it gas it dies.
      Does anybody know what could be wrong?
      I also changed the spark plug and air filter along with the oil and oil filter.
       
    • By Jers
      I need to know what I have and what tire really go on it, Mine has 24x11x10 on the back and 22x8x10 on the front and I need new tire but I don't think are the right size. Also I can't find the model number listed but it looks like a 250 quadrunner 2wd and I think it is a 1987 maybe, can anyone help me, also I it has a rich running sound and I put a carb diap in it and cleaned the carb. is there a jet needing replaced?
    • By Kyboy
      Iam looking for help seperating the rear brake drum and the cover. Any suggestions would be greatly appreciate
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...