Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

MadRanger

Kazuma Falcon 110 stalling problem.

Recommended Posts

Recently got this quad and I am having problem keeping it running.Did not start when I got it. I finally got it to start and it will run as long as choke is on. After it warms up a bit and I try to open choke it will die on me.Also changed oil and there was a fuel smell to the old oil. Could this be a float needle problem causing too much fuel being dumped into the carb?

Share this post


Link to post
Share on other sites


sounds like it. fuel will run into the crankcase if there is a sticky float that is in open position. maybe a good cleaning of the carb will have it running smooth again ....

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Frank Angerano
      So i took a road trip today to look at a Suzuki Eiger! 2006 in perfect condition other then the fact it starts for 30 seconds and shuts down.  
      Its been sitting for about a year in a shed. 
      It has a plow and a winch included!!!
      Got it for a really good price and all looks good so far.  
       
      Stay tuned.  





    • By Julio Cano
      The tires which I bought on ebay cannot be balanced, it’s out of round.Tried riding and had wobble. 
      It was mounted in shop and they also put it on a rim they had sitting in the shop and same issue to confirm it.
      Are they defective ?
      They have brand new high quality tires for my  old suzuki gsxr750 and want about $600 for two tires.
      Is it worth it to pay that much or buy another set of front rear tires like Hexautoparts which has good reviews on trustpilot.com?
      Any recommendations ?
      Thank you.
    • By dgk_mike
      It will go into neutral, 1st, 2nd, and reverse but nothing after 2nd gear. The shifter moves freely going up completely nothing but when you shift down it works. I’m not sure if it’s tranny issue worth messing with or if I should just buy a new one.  Overall besides that the thing runs like new.

    • By Adrian Ciotinga
      So I’ve had this quad for the better part of a month, and it’s been hard to start since the day I bought it. Once it warms up it idles just fine and has plenty of power and starts no problem, but cold it takes 20 seconds minimum of straight cranking to start it.
      It’s not really too big of an issue, I’m just curious as to why it takes so long. Earlier today, it took me about 2 minutes of on/off cranking to get it to fire.
      i have attached a video of a cold start to show you what I mean.
      FullSizeRender.mov
    • By Venom
      Hi All,
      I did a total restoration on a 2003 Yamaha Raptor 80. Rebuilt the engine and tranny.. Started it up today and it runs great. Took it for a ride and the transmission worked perfectly. Adjusted the carb a little more and went for another ride. It ran awesome, pulled into the workshop shifted into neutral ( Neutral light came on) and shut off the bike. went to roll it and noticed she would not roll. Turned on the key and neutral light was on... After some troubleshooting I found that she is in first gear with the neutral light on and will not shift into neutral... It seems to up shift fine into 2nd and 3rd and then back down to 1st. I am hoping somebody can shed some light on what is happening... Thanks for any help...

  • Similar Tagged Content

  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...