-
Join Today, It's Simple and FREE!
As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery. Registration is fast and you can even login with social network accounts to sync your profiles and content.
-
Similar Topics
-
By Belmontie
Hi all just started to mount a winch on my kingquad 400 using a kfi mounting plate and the holes don’t line up. The winch is Rhino 3000lb not sure if you have them in the States they’re an Amazon job. I was wondering can I just drill the mount out to make it fit, the holes are fine depth wise it’s just the width trouble is it’s not out a great deal and as the holes are countersunk they will overlap I don’t want a loose winch. Dunno if you can make sense of all that but any help would be appreciated thanks.
-
By Sturgeon
Hello everyone, did a search and not successful. Purchased new 2017 Sportsman 570 sp and my power steering is not working. Seems to have a mind of it's own. Works then it doesn't. Dealer says there's not a fix. Thought it was just me and it being a brand new machine with 4 hours on it. Dealership said it's this model only ? Not sure what a person in this spot is suppose to do and wondering are your thoughts mite be. Thanks
-
-
By bradleyheathhays
Last time I installed a remote start system it was on an old Dynasty whose wiring was too delicate to work on really. A couple weeks after installation it started ok but a ton of white smoke came from under the dash. I uninstalled the entire system and everything was fine after that.
So in picking out a starter for this '02 Taurus I want something simple that will work with this car well. The start systems I'm seeing are generally designed to do door locking and unlocking, trunk release, etc. As this car already has those functions on a fob I won't be using any function on any future remote start system other than the remote start.
Can anyone with knowledge of my car recommend a decent but low cost / low extra functions start system that would work well with my Taurus?
Thanks
-
-
-
-
Similar Tagged Content
-
By Guest Fox300exchic
There are many ways to install grips and make them stick. The best one, short of having grip glue, is to use carb cleaner. First, clean your handlebars with carb cleaner and a rag, then spray the inside of the grips liberally. The carb spray acts as a lubricant first and then actually melts the grips enough so that it will bond to the clean handlebar. This works great for all but the most extreme conditions. If wet weather is involved, you really need to use grip glue, and in addition, you should follow that up with some safety wire.
QUAD off-road magazine
-
-
-
-
By Racer944
Hi Folks;
Has anybody on here installed a winch on a 2003 Magnum 2x4? I am using a Cycle Country adapter plate (only one I could find), but am having a bit of trouble getting it all to fit properly, and am looking for someone that may have done this install and/or may have some pics of the installation.
Thanks!
Eric
-
-
Recently Browsing 0 members
No registered users viewing this page.
