Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

thetucks

2001 Yamaha Grizzly 600 - Engine Knock

Recommended Posts

I have a grizzly that has a lower engine knock. Any pointers you guys can give me on tearing it apart to fix the problem? im guessing a connecting rod is knocking. Im going to take the head and cylinder off tomorrow to inspect the piston to conecting rod and see if thats my problem. im betting its the lower bearing or something. the manual says you have to remove the engine to replace the lower...is that right? any tips?? thanks for any and all help.

Share this post


Link to post
Share on other sites


i'm not sure about taking the engine out, but if the manual says; it might be a helluva lot easier to work on. ck1999_400ex would be a good guy to pm about this. i know he's done alot of yamaha work ...

Share this post


Link to post
Share on other sites

Thanks oxidized_black for the reply. I have removed all the head and cylinder with it in but now im at the point that it will have to be removed to split it in half. can anyone verify this? thanks

Share this post


Link to post
Share on other sites

yes u will have to remove the motor from the frame to split the case to get the crank and rod out ... but another thing that will sound like a lower end motor knock is a worn clutch .. i have seen that on many quads with a belt drive .. they sound like the lower end is knocking when its actually not .. it was a clutch with worn parts ..causing the noise ... that has not always been it ... some times it is actually the rod or bad crank ...

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Flipper Tiffany Roper Jones
      All I have been through everything. Bought brand new.
      Throttle safety switch 
      Cam and rockers
      ECM
      Carborator
      Stator
      Fuel safety switch 
      Battery
      Everything every forum has spoken of I've bought sealed airbox completely tight unplugged black wire on trans. I have literally done everything in the book.Checked oil today full of gas anyone no anything what might b wrong. Next I'm taking head off and making sure valves seat any ideas.
    • By bradley nelson
      Im cool with the police in my area so i can ride on public roads.
    • By Ajmboy
      Unfortunately I didn't notice some of the rust hitting the undercarriage of my 2004 Yamaha Grizzly 660, but saw it the other day when I was doing some maintenance, oil change, air filter, spark plug, etc. The left side footrest broke and that's causing the plastic to hit the front wheel. It broke right at the welds from too much rust. Looks to me like what I need is (looked this up on yamahapartshouse.com):
      YAMAHA FOOTREST BOARD 5KM-27481-10 Left side (broken)
      YAMAHA FOOTREST BOARD 5KM-27488-10-00 Right side (rusted and will probably break eventually)

       
      Does anyone have a less expensive source? I did see on ebay a couple of listings but it still comes out to @ $50 each, 
    • By Kaj Colum
      Have a Bayou 400. sometimes when I press the start button i hear the solenoid click but the starter does not engage. Here is the strange thing though, when that happens if I kick the kick start just once then press the start button starter engages normally. Any ideas?
       
    • By Juan Gutierrez
      hello all. i have a suzuki lt230e engine. hopefully i can get it to drive some wheels soon.
  • Similar Tagged Content

    • Guest Fox300exchic
      By Guest Fox300exchic
      The Hop-Up: You may be saying to yourself, “that’s a chick bike,” and you’re right. But honestly, it’s so much more than that. It’s one badass bike. http://www.quadmagazine.com/quad/features/article/0,24942,1587044,00.html
    • By dyyjrr9
      I just got a 1991 Yamaha Moto 4 for my son and I am looking for a service repair manual. I know that the timing chain needs replaced.
    • By alexcross324
      Hi all, I try to find this manual in the threads but you have a lot of stock here
      Cannot find this particular manual.
      I found it for YFM200 but not sure if they are the same.
      Thanks if you could help me with that.
      Im new here so if I did something wrong, please tell me.
    • By davidwestfall
      looking for direct shift shifting lever that properly fits my 2003 Yamaha warrior 350 and fits my foot the same as a stock 2003 Yamaha warrior 350 shifting lever fits my foot
    • By davidwestfall
      hey I'm dave westfall I'm new I just became an official member of this site a few minutes ago. Ive been crazy about quads and bikes since I was about 3 and ive always done my home work on them figuratively speaking. I would say for comparison to the common man that I am pretty knowledgeable about them. its been my passion about most of my life. I love talking about quads and bikes so if anyone out there would like to talk with me about mechanical subjects or about person experiences while riding or just shoot the breeze please feel free to chat with me. I'm looking forward to it.
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...