Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

jeffreyscott

Winch Remote - Have A Question

Recommended Posts

i just went over to the motor sports store and got a remote for my winch it used to i just got the four wheeler a little while ago im trying to touble shoot it and was just wondering if anybody had that issue before thanks jeff

Share this post


Link to post
Share on other sites


i just went over to the motor sports store and got a remote for my winch it used to i just got the four wheeler a little while ago im trying to touble shoot it and was just wondering if anybody had that issue before thanks jeff

jeffreyscott, If you could be a little more clear and specific with your question I think it would help in answering your question.

I can tell you that some of the more expensive winches use a remote that have both a forward and a reverse, the least expensive winches do not have a reverse only a forward the reverse is done manually by hand.

Share this post


Link to post
Share on other sites

sorry guys i got it going and now im just ready to put new tires on her and take her for a spin lol but the remote has a reverse and a foward button in and out thanks guys i ll get back to ya later

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Squirrel
      Several months ago, I finally got around to fixing the bayou. Rebuilt the carb, replaced the fuel selector switch, hoses and fuel filter, and she ran great. Only had 2 minor issues since then where, at higher speeds, it acted like it was choking out when I let off the throttle.
      Lately I've noticed if I let it go for more than a week, it almost drains the battery dead trying to start. I initially thought battery, but after inspecting I found very little if not any fuel flow through the line until it starts and runs.
      I'm a little baffled and don't have much time to mess with it as most my free time right now is spent on getting my rv up and ready for hunting season in the next 3 weeks. So any help on quick diagnosis checks would be helpful. Otherwise I'll just keep starting it every 3-4 days to keep things primed until I'm done hunting.
       
      Oh, and another question on a different topic. Does anybody know what the mounting brackets on the front rack are for? I'm referring to the 2 angled metal tabs with threaded holes that are located on the left, near your knee when sitting on the quad?
       
      Sent from my SM-G950U using Tapatalk
       
       
    • By northern
      Just picked this up at a yard sale, runs and drives..color coded wires for battery were backwards, Meaning a red wire was used for negative and a black for positive....
       
      Upon bringing it home decided to boost the battery and walked away giving it a small charge prior to starting it..came back to find battery slightly smoking and my Green light for power (neutral) was no longer lit up...Still starts when i pull start it with key on.
      Turn key on and no starter spin up, no lights
      Id like to get my Electric start working, What could be the problem, Where does one start.
    • By aaron cesene
      I have a 08 artic cat 366 4x4 fis red.   Blown motor.  Anyone know or where to find out what engines are compatible with this bike?  Would love to upgrade if possible.  My other option is to rebuild.  It broke good might have pieces in jug!!  So might have to come all the way apart.   Help please
    • By Richard Western
      Hi guys,
      I am hoping someone might be able to help me out. My Kawasaki 300 4x4 has an issue where it doesn't seem to want to go into neutral and also it will shift into reverse without using the lockout knob.
      If anyone can suggest what to look at it would be very much appreciated.
      Thanks.
    • By KJINTF
      Been slow in starting up, in the recent past it would start up in <1/2 second of the button press with a snap. Now it takes several seconds of cranking to get going. Once going runs as it always did. Replaced the plug no change. Battery is good.
      Before I tear it apart and look things over was hoping others might have had the same experience and have a quick fix for me
      Thanks in advance for any and all suggestions to get this old machine starting quickly again as it has for 20 years.  
  • Similar Tagged Content

    • By jimbo1944
      Greetings,
      I have a 1998 Yamaha big bear 350, new to this. When its cold it is very difficult to shift. Once its warm its ok, however, my old feet don't like the shifting. I saw on ebay a hand shifter conversion kit. Any advice, I live in the Low Country of SC no hills, I use the machine around the farm for corning and scouting.
      Thanks,
      Jim
    • By neo33ny
      Long story short, I have an lt160 with a quad racer swingarm. It needs new front pivot bearings. Whoever swapped the swingarm used pipe and stacks of washers to space it but it still seemed to have quite a bit of play. My question is how would I go about spacing it more "legit"?. It's just going to be a beater for around the farm but I don't want it totally cob jobbed. From the looks of it, it's just a matter of aligning it, measuring and finding something to shim the gaps. Correct me if I'm wrong or if there's a better or proper way to go about this. Also not sure what I would use for spacers. Any help/tips would be appreciated. Thanks.
    • By spitfire
      Found and 1986 lt160f that has had the head removed. Firstly, the engine has sat outside in the elements for a long period of time. The timing chain is rusty but their appears to little or water in the oil. Do you think that it is worth salvaging and if so, what would you do to motor to remove the rust. Thanks
    • By jeffreyscott
      i got a 2003 polaris sportsman 500 ho when i start it up it idles ok but when i go it squeals and shuts off like something is locking up thanks jeff
    • By jondom
      i have a 400 ex i would like help finding out how to safly get the cam gear flang off to install it on my aftermarket one and ideas?
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...