Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

TEAMFASRACING

Annual East Coasters Trip to Glamis Sand Dunes CA

Recommended Posts

It's Our Annual Trip Time Again!!! Leaving NY/NJ Area. Visit www.QuadTrips.com for all info. Shipping round trip for roughly $600 per Quad, $400 per Bike, Price includes Shipping and Security until you pick up and drop off your bike again. More Info Below:

I'm planning our Annual East Coast Trip to the Imperial Sand Dunes in Glamis, California. Please let me know if anyone would like to join us. Feb. 2013 is now being booked. We have 10 Spots left on the 1st Truck. The dates for this years Trip are Feb. 11th - Feb. 19th 2013

For more info just PM me or visit GlamisTrips.com | Providing Low Cost trips for Riders on the East Coast since 1999

I Hope to get a bunch of guys from here going as you know I have been doing this for many years and am super knowledgeable about the dunes. Feel free to ask anything. There are no stupid questions. Pricing is $600 per Quad / $400 per Bike for the shipping round trip. Shipping is what we provide.

Airfare you have to figure on $300 and then a motor home between 3 guys is about $400 each. After that you have spending money beer food etc. You have to figure on $1800 or so total. We stay for 8-9 days of riding. - JT

Preview of Trip and last years videos are at QuadStateRiders.com / QuadTrips.com / GlamisTrips.com - YouTube Some of the members from here are on the vids that went with us last year

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Dra O
      posted a while back - it was running at one point - I have all the plastic shroud off - it's down to frame and engine now
      -fuel pump: when line from petcock is attached, no fuel comes out other side to carb; the line to the carb is open (can blow through it); I thought when I cranked engine that the pump would spit out fuel on other side but it does not; I removed fuel pump and opened it up - diaphragm looks good - but internal areas had lotsa calcification build up - I cleaned this out and dried it good - the clear plastic pieces (?diaphragms) aren't broken - the spring w/ steel ball on end moves freely; am putting it back on tomorrow; but can anyone answer about the pump? isn't it supposed to pump fuel through it... to other side... to carb? puzzling
      -along with fuel pump: I replaced petcock 3 weeks ago (gas tank had rusty fuel in bottom - cleaned it out prior to new petcock); when I turn petcock arrow NOT to on or reserve, fuel comes out of line; when I turn it to on or reserve, fuel doesn't come out; puzzling
      -I don't know what's on back of fuel pump - it's a valve that has a hose coming out of it - looks like it goes to engine/carb - I haven't traced this out yet - what is it?
      -can squirt gas on air filter and engine will run for 2-3 seconds then stop - fuel in top of carb (under diaphragm) does same
      -it likely needs carb rebuild - will get to this - but something isn't allowing fuel to get from fuel pump to carb
      -I THINK it has a mikuni model x carb - diaphragm is ID 26mm  OD 68mm - hard to find inexpensive diaphragm, I guess because it's a model x
      -last thing - I replaced solenoid due to old one clicking; I HAVE to be charging the battery or it won't start/turn over - battery just goes dead; but if charging, it'll turn over nicely; i'm guessing it's a bad battery
      -any help appreciated - I've never owned an ATV before - inherited this beast from grandparent in-law
    • By lanow
      Hi Everyone,
      I am new to this forum and hope that someone out there can help me, I have an early Suzuki King Quad 300 (280cc) which starts intstantly every time but at about half revs or there abouts it starts spluttering and will not rev any higher, this fault is present whether choke is applied or not, some one suggested that silencer maybe be clogged so removed baffle but no improvement have removed carb and stripped 3 times but still no joy.
      Any ideas would be most welcome.
      Cheers Rob
    • By StolenATV
      1987 Suzuki LT 80 and 2007 Honda CRF 50 dirt bike stolen out of my driveway on July 4th. Anyone with info that recovers them will get $400 no questions asked.
      Thanks
      The post Suzuki LT 80 Quad And Honda Dirt Bike appeared first on STOLEN 911.
      View the full article
    • By raybob
      replacing carb,, the bigger line on right side top of carb does it just vent to the air,, cant find where to hook it up to also I want to check the oil and gear oil I checked the oil in motor and the rear end my question is looks like allen plug on left side of motor if you are setting on the 4 wheller, ps it hs a oli leak any help would be great. Ray in kentucky
    • By Shane Pillar
      Talk about what kind of atv you have and what you do with it.
  • Similar Tagged Content

  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...