Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Recommended Posts

I just picked up a cheap big bear Im trying to fix up needs alot of work so going thru it piece by piece.

1. The air box is completely stripped no breather hose, no hose to carb, and no filter or pieces inisde. Can anyone tell me if the typical K&N air filter comes with everything I need... I know it was a oiled element stock that slid onto a sleeve which I dont have so Im trying to find the quickest easiet way to get it back together.

2. I bought a new ignition and plugged it in and it started hissing and getting hot at the plug connection, I ripped it out quick and checked with my meter and it still seems to be ok. So can anyone tell me if there brown wire the wire thats hot with ignition on has continuity to ground.... I traced mine all the way back to getting ground thru the neutral and reverse switches thru the relays and all.

The only other thing I can figure is it seems when i pulled the ignition plug off the 2 prongs looked like they are pushed in too far as if they wouldt insert/engage into the female plugs on the opposite plug and maybe its jumping/arcing and shorting out.

I do have a service manual, wiring diagrams, and found OEM parts diagrams I just cant make sense of these couple things with out a little direction.

Any ideas???

Edited by slats_bigbear
spelling

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Similar Topics

    • By Ellery Zandt
      I have no idea where the antifreeze line coming off the thermostat goes too. The carb two nipples in the pic create a vacumme. Can someone help me on this please....!!! my email direct is [email protected]!!!!
    • By JacobSlabach
      got 7 atvs off CL recently for a good price.  one of which is a yamaha warrior.  anyone know where the vin is printed on this bike?  Haha good place to start as I do not know year or size yet.  The former owner says needs exhaust ans and clutch work.  he said it ran fine until the clutch cable broke and then I couldn't get the new cable adjusted right and it would grind gears.  things I see:  clutch cable locked up again, no brakes, carb leaking (green with algae around the bowl and has gelled gas stalagtights on it), aftermarket exhaust melted the airbox so I need something different and a new air box.  I would like the use the current exhaust if I can but I have a feeling its a redneck fix as it looks like there is an ace bandage holding it to the exhaust pipe (its an aftermarket slip-on exhaust), so I'm not sure about that- lets get the bike running first.  also, battery (looks brand new, what a shame) is dead, 0 volts.  Otherwise, bike looks to have not been wrecked, and plastics are ok (it sat outside under a 'tarp' for 3+ years since it was run last).  any tips and advise on where to start first would be awesome as this is my first clutched bike (manual).
      the clutch is my main concern- I've never rode a clutched bike so I dont even know what its supposed to feel like.  lol I'm spoiled on my automatic polaris 
    • By Colin Davis
      Does anybody know where I can buy a complete wiring harness for a Yamaha bear tracker. If not could someone send me a picture of the the colors of the wires coming out of the cdi plug and voltage rectifier. So I can get an idea of how I need to wire it. Also where can I find a wiring diagram for them?
    • By Colin Davis
      I recently acquired a Yamaha bear tracker 250 that does have a wiring harness.  Does anybody have a wiring diagram for the 250s. Also if you have a pin diagram that tells be the colors of the wires going to the cdi and rectifier or just a picture of the plugs would be much appreciated. I can’t find anything on the harness online. I have all of the switches and stuff and I plan on just build a harness myself because I can’t find one to buy.



    • By Ellery Zandt
      Does anyone have a redcat 250 or falcon 250cc that they can share where the two vacuum lines on the carburetor that you run antifreeze through I honestly have no idea where the lines are suppose to go to circulate the antifreeze. 
       
      Any help is greatly appreciated. 
       
  • Similar Tagged Content

    • Guest Fox300exchic
      By Guest Fox300exchic
      The Hop-Up: You may be saying to yourself, “that’s a chick bike,” and you’re right. But honestly, it’s so much more than that. It’s one badass bike. http://www.quadmagazine.com/quad/features/article/0,24942,1587044,00.html
    • By crazynordlander
      Hi All,
      Has anyone found engine oil in their air filter box. The must be little or no baffle between crankcase ventilation and that hose that attaches to the air filter box.
      I went to pick up my ATV today 60 miles away that they could not fix the jerky low speeds on and before I loaded it decided to check on this. Sure enough there was a good coating of oil with some pooling in the bottom of the air filter box. The air filter has oil on it too but is it a dry element or oiled element type. My guess from the color of it dry.
      I heard on a comment on my YT videos that there is a kit for this issue? Is this a CFMOTO fix?
      Thanks
      Kevin
    • By alexcross324
      Hi all, I try to find this manual in the threads but you have a lot of stock here
      Cannot find this particular manual.
      I found it for YFM200 but not sure if they are the same.
      Thanks if you could help me with that.
      Im new here so if I did something wrong, please tell me.
    • By dyyjrr9
      I just got a 1991 Yamaha Moto 4 for my son and I am looking for a service repair manual. I know that the timing chain needs replaced.
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...