Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

mb1968

Brute Force 300 Tires

Recommended Posts

2013 Brute Force, I believe the rear tire size is 22x10x10 !! I am looking to replace my rear tires on my my 4x2 B.F. 300 !! Seems like an odd tire size for the rear tires on my bike. My question is can I go 1" bigger, someway in tire size to where it would not affect bike performance ?? Seems like the 22x10x10 tire size is really odd !!! Thanks for any input !!!!

Share this post


Link to post
Share on other sites


i am certainly no expert but will give ya my $.02.. i recently purchased an 08 BF. i went up an 1" in tire size. the BF is now sittin on some mud terrains. As with any increase in tire size (on any vehicle), if you dont re-gear, you will lose some performance. I have found that on my new Brute, the increase really didn't show a noticeable difference. However, if you had your bike on a dyno before the new tires and then dyno'd again after, i'm sure the numbers wouldn't lie. I'd say go for it! the BF has decent power and you wont notice a big difference in performance. good luck :)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Ryan Geiler
      New to the ATV world, picked up a solid used Kodiak 400.  It appears the former owner did some sort of modification for a saddle bag or something along those lines--and I'd like to match it up and replace it.  Not a big deal by any means but something I thought I would give a shot at finding.
      does anyone recognize what kind of luggage/bag/cargo would go where those white tabs are he drilled through that fuel fender?
       
      Thanks again

    • By Walter Awe
      I HAVE a 2002 big bear 400 4x4. I have two wires atacking to the front of the carb. What are they for?
    • By JacobSlabach
      So yesterday I picked up a 07 polaris sportsman 800efi stealth edition for 3k.  Will lead a pic ltr.  In good shape.  Here's what's wrong with it:
      The rpm needle doesn't work just like my other sportsman... not too worried ab that.
      The motor doesn't sound like it's running quite right and doesn't feel like it has much more power than my 500.  I'm thinking it needs a tune up and some fresh oil..  but also it feels like it's running rich.  It's a little buggy when you goose the throttle and sometimes farts when you let off (like I little backfire out the exhuast). I'm gonna check timing and valave clearence on the motor first but thinking of putting a tuner on it? Anybody got a suggestion?  Mainly looking for more power.
    • By caperwing
      The rear brakes on this are hydraulic and manual. The hydraulic part is all messed up so I disconnected it all and want to go just manual on the rear. I got it all put back together but doesn't seem to work to well, like not enough pressure. The manual says I should mark the casing before taking it apart which I didn't read until to late. Any ideas? I put new brake pads on.
    • By MarkinAR
      Let me start with I have about 30 years of ATC experience, but not much with stuff made after 1988.  Some, but I'm mechanically inclined so it's all good.  I"m rehabbing a 1997 Bayou 220 to send back into the wild and the mechanicals are now all good, just working on making the electrical system...electric.  Right now, I have no power on the white wire as tested directly on the plug at the starter solenoid.  I'm assuming that wire is supposed to be hot any time it's attached to a battery?  The genius that had it before snipped a couple wires and inserted a fairly heavy push button for electric start bypassing the electrical system. I think i've corrected everything north of the solenoid but the white wire has me stumped.  Is my assumption that this should always be hot with a hot battery correct?  Does this indicate a broken circuit in the starter solenoid?  Relay was also bad and wired incorrectly, but that's resolved and I can make the relay click bypassing the solenoid and connector, directly giving the white wire 12V.  Thoughts?
  • Similar Tagged Content

    • By Ashton Crawford
      Hello everyone, i have 2000 Polaris Trail Blazer 300 I’ve been stumped on for weeks. I’m having a lot of issues starting the quad. I cleaned the carb spotless because I thought it was a carb issue and bought a new fuel line because it wasn’t getting fuel. The carb gets fuel perfectly fine now but it won’t start. The spark plug I a little worn out but it’s good enough for just one start. The only time it does “start” is when I spray starter fluid into the carb. But it never stays on. It’ll start for a bout a second then just die out immediately even if you’re giving it some throttle and the choke is on. I have no clue what I should do. If you need more information, have questions, or have any slight idea what the issue would be and how I could resolve it. Please reply ASAP. Thank you.
    • By Alan Callison
      OK ya'll.My son bought this thing and was told its a Kaw Bayou 300. Maybe. I cant find any numbers on it.The one tag I did find its so faded as to be unreadable. Its a long shot but maybe someone can help ID it. Thanks in advance.









    • By Jeff Wharton
      I have a 2000 Arctic Cat 300 4 wheeler. I have been having some carburetor issues. So i bought a new carb. Now I'm having these issues. The unit will start and idle fine, when i go to accelerate it wants to cut off. So i checked to make sure it was getting gas and the fuel filter will be full of gas and then once the carb opens the filter drains down and will not refill quick enough to run. So i checked to make sure gas was flowing to the filter and it is flowing fine through the line. I remove the filter and run the gas line directly to the carb and the engine idle fine and then it will run good as i ride it for about 10 minutes then it will start with the same issues again i cannot accelerate enough to move the 4 wheeler. Every time i accelerate the unit will cut off. What is wrong with this thing. My 400 Arctic Cat is doing the same thing except it will backfire, I'm lost i have tried everything i know to do, what am i missing here. Thanks for your help
    • By Maurais
      I’m looking for new replacement shocks (front & rear.) on my 1997 Kawasaki Bayou 300 2x4. New OEM shocks are upwards of $400. I haven’t pulled the rims off to check the eyelet to eyelet length but I’m hoping an expert on this site does know( I called Kawasaki direct yesterday and they were of know help.) Any technical help would be appreciated. TY fellow members. Vic
    • By scottj11
      Hello, how are you'ns doing? I'm in the process of tearing my Kawasaki Bayou down to fix a rattling noise and an oil leak. I'll probably be asking questions about this project. My step-son has an Arctic Cat 300, he was riding yesterday and when he turned it off it was running fine, but it won't do anything. The lights come on but it won't turn over or anything. Does anyone have any ideas on what might be wrong? TIA
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...