Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Admin

Quad 101: Liquid Cooling

Recommended Posts

Liquid cooling uses a radiator filled with coolant to keep your quad from overheating...

More...

Share this post


Link to post
Share on other sites


There are also Several Different Types of Impellers, Coolant Additives that can reduce your Temp by 10-15 Degrees in most cases....Also,,,,Instead of Relying on an idiot light...Invest in a Thermo Gauge or one of those heat guns to get a Proper reading...If you idiot light comes on its almost too late....

Share this post


Link to post
Share on other sites

OOH...MWKE, temp gun is a fantastic idea! I never thought of that. Auto Mechanics use that all the time. What type of additive would you recommend to add in the antifreeze? Specific brand? Thanks!

Share this post


Link to post
Share on other sites

I use WATER WETTER.....And Swear By it....Most of the Racers, around here anyway,,,,Just use Straight Water....Antifreeze doesnt Do anything to Reduce the Heat....Only keeps it from Freezing....But I run Coolant and Water Wetter.....:wink:

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Forum Topics

    • By StolenATV
      New plastic fenders few scratches extended rear end nerf bars
      The post Stolen Honda ATV Quad appeared first on Stolen 911.
      View the full article
    • By scott1445
      Found this system and have tried it on my quad (and bikes) had to mod the mount a little to fit my wider bars but that was simple with some aluminum flat stock adding 2" to each side. Simple wiring and all in one unit so did not have to bury an amp....loaded it up with music and also use my bluetooth on phone...wanted to share....its on ebay under firehousetechnology . wanted to share will post more as I ride more but so far so good and simple addition! They are on facebook also under firehouse technology if you wanted to see what they posted
      Here is video link to there initial post and video


    • By marlon smith
      i HAVE A 2008 BAja 250 ur quad, have running problems and electrical rewiring project. I have found this model is made by loncin which has went out business. Have found some parts such as switches that have to be rewired and I think I have a bad stator. Will run till warm and then stops firing. The cdi is new and would not fire at all till I replaced it. Now I have this problem. Can anyone connect me with a good wiring diagram and a good diagnostic  procedure for this 7 wire 3 plug  cdi?
    • By marlon smith
      i HAVE A 2008 BAja 250 ur quad, have running problems and electrical rewiring project. I have found this model is made by loncin which has went out business. Have found some parts such as switches that have to be rewired and I think I have a bad stator. Will run till warm and then stops firing. The cdi is new and would not fire at all till I replaced it. Now I have this problem. Can anyone connect me with a good wiring diagram and a good diagnostic  procedure for this 7 wire 3 plug  cdi?
    • By PKR
      Does anyone know if and where you can get parts for a no name carb. My neighbor has one on a 1989 Yamaha 350 big bear and it is leaking gas around the seal on the accelerator pump. (see pic).
      Any and all help would be appreciated
       
      Thanks
      PKR

  • Similar Tagged Content

    • Guest Fox300exchic
      By Guest Fox300exchic
      The Hop-Up: You may be saying to yourself, “that’s a chick bike,” and you’re right. But honestly, it’s so much more than that. It’s one badass bike. http://www.quadmagazine.com/quad/features/article/0,24942,1587044,00.html
    • By skgw1
      Feul pump went out. Replaced. At times quad cuts out like its not getting gas. Saw article on new pump needs to be calibrated. Told how to go into a service mode. Does not tell how to calibrate after going into mode. Can anyone shed light on this procedure.
    • By katasha2
      I took apart the carburator to clean out and I can't remember exactly where the springs that are inside the float are supposed to go I've tried to look up schematics but I think I am missing a spring maybe need helpt:confused::confused:
    • By superdude811
      Can you put tracks on manual atvs? would it be effective? is 280cc enough to even move them? thoughts/suggestions?
    • By Bwdeaton
      I recently picked up a king quad 700 that doesn't run in the hopes of getting it running by spring. It had been previously taken apart some and a few pieces are missing in the engine, but the frame is complete and in good condition. The motor will need a piston, rings, cylinder, cams, and a few misc parts that are missing. Also the cases will need to be split to remove the pieces of piston that are in the crankcase. The piston blew up at high rpm and did a number on the cylinder so I'm trying to find out if it would be worth rebuilding this motor it buying another engine to swap in. There may be more damage to this engine that I can see so I was wondering how bad the insides of it could be considering it destroyed the piston. I have found a motor for 1200 plus 200 shipping, the only problem is I don't have that much now and I would have to save up a while before being able to afford it. Any suggestions appreciated.
  • Recently Browsing   0 members

    No registered users viewing this page.


×