Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

doccafs

04 magnum 330 4x4

Recommended Posts

Hello, I have a magnum 330 4x4 all stock just like i got it from the dealership. I have never had a problem untill now. it starts easy idles great. then when you run it for a few minutes it looses all power. it will idle great but will not move when you are on the gas, it will loop, try to rev up then fall on it face. it will do this untill you let off the gas then it will idle great.

the past week we opened up the carb several time several different guys and cleaned it out. well after the first time it was "look at how clean it is", was the comments. cleaned out the fuel pump, new fuel lines and filter.. the reason i started this was for no power and no top end and stalling, we even adjusted the valves to factory spec. on the jets they are factory set no adjustment other than idle, and it idles perfect. everything i have learned over the years tells me it is a lack of fuel, i have good flow out of the tank on both lines, have good flow to the pump. I dont know how this pump works and no one i know does either. seems to run off the crankcase pressure.... from the piston going up and down. not sure,.... anybody have any time with this polaris 330 engine, the 500 may have the same set up maybe others.

2004 polaris magnum 330 4x4 all stock

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Erik Plug
      Hi all,
       
      Picked up my first Brute Force yesterday. What should have been an awesome afternoon of riding turn a bit into a deception. As I was unable to really take it out for a test drive at the shop, I decided to buy it and agreed that I would take the test drive at home. 
      When giving full throttle I noticed that the Brute was choking and lost all of its powers. Faulty fuel pump most likely. 
      Called the shop and the are coming to pick it up and repair it and bring it back. Good service. Nevertheless feels a bit sour in the mouth as I was told it was a 100% good. 
      Need to have some patience I now before I can really start riding. 
      Cheers,
      Erik
    • By wwdubose
      I have two 2003 Suzuki Ozark 250s, both 2-wheel drive.  Last time we rode them about a year ago, the red one was not running well, didn't want to idle, backfired a lot.  The green one ran fine. 
      Fast forward...I ordered a carb kit for both of them, thinking the red one has some trash in a jet.  Both of these ATVs have had little use and I've always ran the gas out after use (put an inline cutoff valve in gas line).  I pull started the red one to verify it was still running bad.  It will start and idle, but as soon as you give it any throttle, it dies instantly.  Give it a little choke, dies instantly.  Took the carb apart and it was spotless.  Went ahead and cleaned all the holes with carb cleaner and blew everything out with compressed air.  All new jets, main jet holder, and needles.  Put it back on and nothing changed.  Starts, idles (not for a long time), but dies as soon as you give it gas.  Same happens when you put the choke on.  It does the same thing when I try to run it turned to prime on the petcock as it does in the on position.
      Not an air filter issue.  It is clean and it does the same exact thing with no filter on it.
      Thought maybe there was a float issue or maybe a damaged diaphragm, so I took the carb off the green Ozark and put it on red.  Started up and initially ran normal and revved for about 10 seconds and then started doing the same exact thing.  Starts, idles (not for a long time), but dies as soon as you give it gas.  Same happens when you put the choke on. 
      So...not the carb
      Thought maybe vacuum petcock was bad, but there's no gas in the vacuum line going from petcock to carb and gas flows freely when on prime.  I even plugged the vacuum line at both the petcock and carb end and tried to run it with valve set to prime.  Gas flows freely, but does exactly the same thing.  I unscrewed the screw at the bottom of the bowl and gas flows thru carb and out bowl drain line when petcock is set to prime.
      So, I'm assuming petcock is good?
      Checked spark plug and it wasn't fouled.  Reset gap, didn't help.  Will swap plugs between Ozarks tomorrow but I don't think that is it.
      Anyway, that he history and now you're all caught up.  Scratching my head.  Valves? These were bought at same time and have had little use.  Suggestions?
      Thanks!   
    • By flyinbrian365
      View File 2002 Polaris Magnum 325/500 Service Manual
      2002 Polaris Magnum 325/500 Full Service Manual
      Submitter flyinbrian365 Submitted 05/14/2020 Category Polaris ATV  
    • By Chase Cook
      Hi I was riding my Honda the other day and I gave it gas for about a quarter-mile just flooring it and then it started to lose power. I pushed it about a mile home which was a pain in the butt but when I got home It still had gas, compression and spark. Do you think the timing jumped possibly?
  • Similar Tagged Content

  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...