Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

N2ATRX

Honda 400ex - No Drive Gear

Recommended Posts

first things first i gotta say what up to everyone on here and to all you im a newbie on here so if this topic has been coverd my bad. im a first time owner of atvs. i just bought a 400ex.

its got a bigbore kit lots of aftermarket mods to engine like cam etc. so i got a good deal i guess cause i bought it broke. this how it was explained to me , less then six hour s ride time on mods . guy goes out on pavement with new razr tires on the rear throws the coals to her in second gear goes to grab for third while the front end comes up and he said it went BANG all the sudden there is no drive from trans, or front sproket /output shaft. anyone ever here of this before? any help would be greatly appreciated .

Edited by N2ATRX
had labeled title wrong

Share this post


Link to post
Share on other sites


if your lucky the only thing that gave was the clutch /basket in the clutch system.. if not .. its gonna be a costly repair .. and not something a first time owner would wana get into ... another option would be to buy another running motor from ebay and swap it over .. and eventually swap all your hop up mods ..

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By 06kfx440
      It’s been a pleasure serving all of you. I can not ride anymore. My illness has turned to the worst and I can barely walk anymore. I will still be here helping where I can. I might just get an oddsey and work the sh!t out of it. But I’m done. I didn’t want to be in this situation. But I have to take it. It’s been so much fun here guys!
       
       
      Sent from my iPhone using Tapatalk
    • By JacobSlabach
      First of all sorry I have been MIA here for a while, been busy with school and work.  I'll try and reply on some other threads asap, but posting this one because I just picked up a 2017 sportsman 570 before the new year and popped a boot on it going through a mud hole.  The former owner had aftermarket axles on it to accommodate the 4in lift and idk what brand they are but they're skinny as heck and idk what boot to buy to rebuild with?  It's the rear right lower boot (under the brake calp.).  I'll post some pics when I can and sorry again I've missed yall on the forum!
    • By Trent Finnessey
      So I’m 14 years old right now..... I’m a pretty good rider for my age, I have a 98’ 300ex that I’m tryna sell. I’m thinking of a 400ex or should I skip the 400 and just go to a 450r or something along those lines? 
    • By James Jezewski
      Hey everyone! New to ATVs, hoping to learn a bunch off this site.
  • Similar Tagged Content

    • By Trent Finnessey
      So I’m 14 years old right now..... I’m a pretty good rider for my age, I have a 98’ 300ex that I’m tryna sell. I’m thinking of a 400ex or should I skip the 400 and just go to a 450r or something along those lines? 
    • By Justice Owens
      Hey guys, any ideas would be greatly appreciated on this. 
      So it started a few months ago, riding with some buddies and my 400ex all of a sudden lost power. Wouldn't fire, wouldn't sputter. Towed it home, and then it fired right up. It continued this pattern for a week or two, ran perfectly for varying amounts of time, suddenly died, and would start right back up if I waited 20 mins or so.
      Now we get to the next phase... I was dinking with it one day, I think I pulled the carb off and cleaned it out, (not really dirty but just to be sure) and I was trying different fuel screw adjustments. At any rate, I didn't notice much change, except obviously running a little poorer when I had the fuel screw in the wrong place. I took it on a quick ride around the block, and it was just fine. Ran awesome, had lots of power, etc. Then went around the block again and it died on me this time right as I revved it. Ever since then I haven't been able to get it to start. 
      Now when I turn it over, it sputters, fires a touch, but won't start. Ever. I replaced the plug, CDI, and coil, with no change. I do know that it has spark, but I don't know for certain that its big enough. After replacing these with no change I popped the carb off and tried firing it up spraying some either right into the intake. Upon doing so, it revved right up, but obviously there was no carb so it didn't stay running for long. While spraying the ether it seemed to run just like other engines I've tried spraying ether into no popping or backfiring etc. When it fired right up on the ether, I figured I must have a carb issue, so I just bought a whole new carb instead of taking the old one apart for the 800th time. When I put it in, there was no change whatsoever. Still turns over and sputters, but won't fire up.
      I am completely befused, and any input would be graciously accepted. If you read through all that your a trooper, so thanks very much :) 
    • By Bob Hill
      I need a motor but i really dont hsve lots of cash and im on the kenai peninsula. Up here in Alaska i really need help
    • By Wali
      I was riding my 400ex one day and when i shut it off to put it in the garage i tried to start it put again to drive it into the garge and it wouldnt start.I put a compression tester on it and its like 30 psi with out throttle and 0 psi WITH THROTTLE.
      when i put my finger over the hole it fell likes its pulling my finger in more then its pushing it out 
       
      Has good spark.When i took it into the shop the said it had 1oz of oil in it and a tiny pit of metal shaving(TINY BIT LIKE 30 flakes)
      When i try to pull start (push start/roll start) it made a not normal sound  and wouldnt stay running.
      If my bottom end is blow why would it still turn over fine,
      Are my valves siezed or not working properly 
      or is my timing off causeing valves to not open in correct order with fire 
      PLEASE HELP all help is appreciated 
    • By Coral Breding
      I loosened the allen bolts on the carrier and when I went to put my driver in the alot to pull back and tighten the chain, I noticed the holes were facing the front of the bike. I tried to slide a driver in and tighten the chain but the thing would not budge. I nearly ripped the tip off the driver in the slot. Any suggestions? 


  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...