Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Muddog

2005 Suzuki Eiger 400 4x4 Auto - Question

Recommended Posts

Im new here Hello to everyone. I have 05 Eiger 400 4x4 Automatic that want go into forward gear. I can run all day long in reverse without any issues. I took the engine out and the front and rear drive shafts turn very free both directions if this will help. With the engine out and seems to be free in both directions its got me thinking could it be in the automatic shifter. maybe a solenoid or something like that. I would really appreciate any help. Thanks in advance.

Share this post


Link to post
Share on other sites


you took the engine out and left the transmission in or took the whole kit and cabootle out?

when you say it wont shift into gear ,,, do you mean the shifter will move, but not mesh with gear or shifter has resistance and nothing budges?

Share this post


Link to post
Share on other sites

It's stuck in reverse. You can drive fine in reverse but can't get it to shift into forward. But I put the whole engine with Tranny connected and everything is free spinning.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By RCNY1
      Seems impossible to find a pair of front shocks for my 02 Yamaha Kodiak,newer or older listings are they the same as a big bear ?  Factory are $245 each !!! Any help appreciated 
    • By caperwing
      The rear brakes on this are hydraulic and manual. The hydraulic part is all messed up so I disconnected it all and want to go just manual on the rear. I got it all put back together but doesn't seem to work to well, like not enough pressure. The manual says I should mark the casing before taking it apart which I didn't read until to late. Any ideas? I put new brake pads on.
    • By Tahj
      I am looking to see why my 2005 Grizzly  660 won't crank. I have set the valves but suspect a loose timing chain.
      When working to remove the valve cover I found a "cap tensioner case" - parts #25  - #299 on Babbitts site.
      The  cover seems to bridge the valve cover and the cylinder head. What the hell is it and what surprises will I  find if I remove it?
      Uncharted territory for me.
    • By Jeff011366
      Hello,
        Over the years I have always used a friends machine, and only ride a few times a year. Last week I purchased a 2002 Polaris Sportsman 700. The front diff needs a rebuild, the axles are very loose where they go into diff. My question is, both front wheels rotate forward by hand, but do not rotate the opposite direction. Is this "NORMAL OPERATION" I plan on rebuilding the hubs at the same time as the diff.....
       
        My question about the rear diff, it rolls as if the machine has a total POSI rear axle...……. I lifted the front end off the garage floor with overhead hoist, as I moved it sideways the rear tires skidded rather than rotate. Both would roll forward easy, but not go in a circle. When I drove the machine in the garage making a tight turn I could feel the binding and skidding of rear tires....  Even if the switch was in 4 wheel drive, when it's hanging in te air the ignition is off...….. with the machine in 2 wheel drive mode, is that HONESTLY 1 wheel drive to allow turning without tearing up the lawn? then it locks the rear axle once it's put into 4 wheel drive? I'm guessing the rear diff needs a rebuild also because there is something "BALLED UP" internally locking the rear wheels together?
        It's a old machine that was not maintained, I thought the wheels were all rusted, but it was 17 years off baked on red clay. Just wanting to make it a reliable machine. I have great mechanical ability, just lacking a little knowledge of what is suppose to be "NORMAL OPERATING STANDARDS"
       
      Thank you in advance for sharing your knowledge.
      Jeff
    • By jim estes
      Just got a Terrapro, almost by accident. Does anyone know why it wont lock into reverse? I know reverse works because I can hand shift at the tranny. Its almost got to be in the linkage...any idea? 
  • Similar Tagged Content

    • By Wali
      I was riding my 400ex one day and when i shut it off to put it in the garage i tried to start it put again to drive it into the garge and it wouldnt start.I put a compression tester on it and its like 30 psi with out throttle and 0 psi WITH THROTTLE.
      when i put my finger over the hole it fell likes its pulling my finger in more then its pushing it out 
       
      Has good spark.When i took it into the shop the said it had 1oz of oil in it and a tiny pit of metal shaving(TINY BIT LIKE 30 flakes)
      When i try to pull start (push start/roll start) it made a not normal sound  and wouldnt stay running.
      If my bottom end is blow why would it still turn over fine,
      Are my valves siezed or not working properly 
      or is my timing off causeing valves to not open in correct order with fire 
      PLEASE HELP all help is appreciated 
    • By Hunter Aldridge
      Some times I get spark some times not can ride then it just dies and wont get spark it has new cdi box and stator but I don't know if it has the pickup coil I'm at a loss
    • By William Sims
      I have a 400 4by4 ,2005 green model,
      wounding how many different CDI boxes will work on it
       
    • By jerry houston
      Eiger 400 Suzuki runs fine Cook-Out joke face off the handlebars put it back on and will not start now will crank no no spark
    • By colin james
      View File 2012-2014 Polaris Sportsman 400 HD Service Manual
      This the factory service manual for the 2012- 2014 sportsman 400 hd service manual 
      Submitter colin james Submitted 02/08/2019 Category Polaris ATV  
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...