Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

n1kk

Budget Performance Exhaust?

Recommended Posts

Would installing a stock exhaust of a bigger atv in place of a stock exhaust of a small atv be a practical substitution to an after market exhaust?

For example would i see any performance gains ( or losses) if i installed a stock exhaust from a 450cc atv onto my 350cc atv. After rejetting of course.

Would it not make much difference? Possibly be worst then stock because of too much flow?

Share this post


Link to post
Share on other sites


you would probably do better buying a k&n filter, cutting the airbox open some, and taking the spark arrester out of your stock exhaust system ... im sure you would notice some more snap ... what bike is this, a warrior? what year?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Chase Cook
      Hi I just got an Polaris sportsman 500 4x4 ATV the other day. I got it real cheap but I started to go into it because it didn't have compression so I bought a new piston and ring kit for it and installed it, but now when I try to start it all it does is shoot fire out the exhaust or the intake of the carburetor. And a timing is top dead center.;I think I can't really tell another way if it is or not. when I put it together I made sure to piston was on top and the cam lobes where facing down where are the cam sprocket is facing up. It has gas and spark. It did start a couple minutes ago but it didn't stay running and now it won't start. Do you think the valve need to be adjusted more to close better?I'm fixing to try that out and if that don't work what is the problem? Also I made sure everything was together good and right and change the oil and changed out the radiator fluid.
    • By hornythrony
      Hey I have a 07 king 700 is there any chips or good things to do to my quad?
    • By Sonders
      Hey all, I recently bought an 01' Sportsman 500 HO from my brother in-law that he's had since new.  It runs awesome, just has 2 slight issues that I am addressing.  1st issue is fuel dripping out of overflow.  I did some searching around and saw that the O-rings in the carb wear out and allow fuel to leak, so I replaced both the Orings inside the carb.  This didn't fix it and still leaking which leads me to believe the float needs adjusted, I'm just not sure on correct way to check and correct this.  2nd issue is no speedometer.  Also in researching this it appears to be Hall Effect/speed sensor.  I'll be ordering one of those to replace, which sounds like a pretty straight forward process.  I guess really my only reason for the post is to get some help on the gas leak issue.  Any thoughts?  Other than that, I love the bike and really enjoy riding it.  Thanks in advance for any replies.
    • By Bleuu
      Hello so I’m new to the atv seen, and was wonder why my stock light didn’t turn on , and it figures that the black and white wire and the black wire were ripped apart everything else is connected fine, what could to reconnect them
  • Similar Tagged Content

    • By marcuslachance
      I
      I bought a Honda 250sx 1986 but the exhaust is broken. Apparently it's not possible to order a new one. I checked to order one on others compagny but there's noting.
      Do you know which exhaust it's possible to install. Is there a company who sold an exaust to fit on my 250sx.
      Sorry for my english
      Thank you
      Marc
    • By hondaforeman450
      Does Honda make an exhaust shield for the operator. My 2004 foremans exhaust manifold gets my leg hot. My 2011 rubicon has this shield.
    • By D__L
      I want to upgrade, not sure what size tires will fit and do I need wheel spacers and lift kit?
      What performance mods do I need to do for the larger tires or don't need to ?
      Like the Maxxis Vipr tires.
      Maxxis Vipr front 27x9R-14
      Maxxis Vipr Rear 27x11R-14
      What size wheel will work? offset?
      Stock 25x10-12 Rears and 25x8-12 Fronts
      Stick with 12 inch wheels and get taller tires?
      Thanks,
    • By PAINS
      I recently aquired a king quad 700. I have changed oil spark plugs and air filter. My question is what could be the cause for oil to be burnt through exhaust? Smoke is blue in color and smells of oil. Bike runs good no loss of power just blows a good bit of smoke after reaching operating temps. Didn't smoke until reaching temperature. Thanks for any input you may have.
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...