Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Cubhorse80

Honda ATC 125m - Possible Buy

Recommended Posts

Hey all! Im new to the forum and done even have any quads or 3 wheelers... I joined because i am thinking of buying a Honda ATC 125m. It looks like it is in really good shape and according to the owner, it runs great! he says however that the electric start wont work, as well as the light. Im thinking this is a key switch issue. I talked him down to 400 and i want it! but thew downfall is that it is a 2 hour dive down to get it. so a 4-5 hour round trip...

What is a good price for one of these? what are some things to look for if i go look at it? Any suggestions??

Thanks!

0161695hQbwd9JTFi695600x450.jpg

00L0L95FOpmJHgZpc95600x450.jpg

0161695hQbwd9JTFi695600x450.jpg.e1039040d07cdf62da0e091cc00806cd.jpg

00L0L95FOpmJHgZpc95600x450.jpg.f4d7f4ac242ff911b1a05ef01cf5a35b.jpg

Edited by Cubhorse80

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Mikey69
      Heres my story. Kinda long. I guess I was a late bloomer when it comes to quads. I had never ridden a quad in my life. Rode Dirt Bikes as a kid growing up. Back in Oct of '06 I found a Mustang on craigslist. Took it for a test drive one morning before work. Fast car. 351 Cleveland. I had planned on meeting the guy again after work. For some strange reason thats still to this day beyond me, I stopped in Hillsboro MotoSports on the way home from work. I had 6 Grand on me. There was a left over '05 sitting by the front door. It was on sale for $4999. It was $5499 OTD. I didnt even look at anything else. I knew nothing about quads accept I thought it really looked coool and I had the money in my pocket to buy it. I was sitting on it when the salesman walked up and asked... "Can I help you?" Without hestitation I pulled 60 Ben Franklins outta my front pocket and said "I want this Quad. Load it up in my truck." It was just about dark by the time I drove away from the shop. BTW, I didnt bother to ask my ol lady if I could buy it. LOL. Anyway, I took it by the house and showed her. She was kinda stunned but not mad. We drove over to a friend of mines house and unloaded it. I took it to the field across the street from his house. HOLY CHIT!!!!! I was surprised by the power. I had it for about 2 weeks and took it to Sand Lake. I was there a few hours and rolled it on a banked turn at the top of the bowl right before you get to the one-ways. When it rolled, I flew off and landed on my belly. The quad came bouncing and landed on my back. For a month I couldnt even walk. I was scared of it. I considered trading it for a 250EX. Went back to the shop. The salesman said..."Dude!!! You dont want a 250EX!!! Trust me. Just get used to it" I still wasnt convinced. I put it on craigslist for $4000. Calls were coming in. I had a guy that wanted to come look at it that evening. I decided to take it for one last ride at Browns Camp before I sold it. I was still afraid of it. After about 5 minutes I started feeling comfortable on it again. I decided right then, I loved my Honda 450 and would learn how to ride it instead of selling it. That was late Nov of '06. Work was slow for a Painter in Oregon. My new job everyday? Going to Browns Camp and ridding my Quad. I bought my Girl Friend an '02 Blaster. I rode my 450 for 4-6 hours almost every single day for 3 months. And yes, I know my way around Browns Camp pretty well. LOL. In March I bought her an '06 TRX250EX (Thank God I didnt trade my 450 for one of those) LOL Since then, I have become totally addicted to quads. I love them. Couldnt imagine not owning at least one quad. Luckily I have two. My "07 was $6500 OTD in July of '07. Bought it for my Girlfriend. Traded in her 250 EX. A month later we broke up. So, I wound up with two Honda 450's.
       
    • By Trent Finnessey
      So I’m 14 years old right now..... I’m a pretty good rider for my age, I have a 98’ 300ex that I’m tryna sell. I’m thinking of a 400ex or should I skip the 400 and just go to a 450r or something along those lines? 
    • By dook
      I've been riding Suzuki Kingquad 300's for the last 20 years. I have 3 of them. I love the low gearing, low center of gravity, low rider position, low racks shaft drive and smooth ride, but they are getting old and I'm tired of fixing them. Best engineering of any utility quad, IMO, but the execution...build quality is not up to par with Honda, so the price you pay is lots of wrenching.
      I positively despise CVT type belt drives. My neighbor has a couple of old Hondas, Rancher and Rubicon and I admire the reliability of them. He does very little maintenance and they always run and have pulled my Kingquads home for me when they break.
      Is Honda the only company that makes ATV's that don't have CVT? I like the build quality but I don't like the high rider position caused by the vertical cylinder, the cold nature of them, having to warm up for several minutes and the plastic skid plates. I guess all modern ATV's have the same issues, though (correct me if I'm wrong).
      Been checking with the dealers, it seems Honda foot shift models are scarce. I really don't need devices/gadgets to decide which gear I need to be in. So I'm avoiding the DCT models. I must have IRS and EPS because of my age and physical condition though.
      Is it possible to get a Rancher with IRS, EPS and foot shift? The specs I'm reading show the rancher is 2" lower than the Rubicon. I'm assuming that to be seat height. With vertical cylinder design, the more you grow the engine, the higher you push the seat....at least that's my thinking.
      Any comments from the Honda experienced?
    • By Jteam
      Hello from NC ladies and gents. Been lurking here off and on and don't think I have ever posted up.

      I have a 2009 Honda Rubicon. I was having a shifting problem with the Hondamatic. Determined it to be a loose connection on the gray 21 pin connector at the control unit (ECM/PCM). I located a source for the connector and replaced it. This improved the connectors feel greatly, HOWEVER, even though I thought I was careful transferring the wires/pins from the old connector to the new connector, I must have crossed up a couple wires because now the gear position display (switch is new) no longer works. It worked fine before the connector change.

      No matter where I have looked, I cannot find a "pin out" for the ECM connectors. The factory service manual does not show it and I have a connection at a dealer and their service techs don't have the pin out either! I was a Chrysler/Plymouth/ Dodge tech in another life and cant imagine th factory not providing pin out diagrams for diagnostics!

      I am at a loss unless I either replace the harness, OR find someone that can take multiple photos of the wires going into the gray connector so I can compare mine.

      Any help or advice would be appreciated. I will also post up the location I found the connectors if that is allowed, since it seems that they fail with some age.

      connector source:
      Motorcycle Connectors
      We have Vintage and modern Sport-bike Motorcycle Wiring Harness electrical Connectors, These connectors are purchase directly from the manufacturer, And in many cases the OEM Supplier, The terminals and connectors are superior quality. Most are Manufactured in the, Japan, USA or Europe. Bullet... www.cycleterminal.com
  • Similar Tagged Content

    • By Maggie Hall
      View File 1984-85 Honda ATC 125m Shop Service Manual
      1984 1985 Honda ATC 125m Service Manual Three Wheeler 3 wheeler ATC CD
      Submitter Maggie Hall Submitted 11/26/2018 Category Honda ATV  
    • By Maggie Hall
      1984 1985 Honda ATC 125m Service Manual Three Wheeler 3 wheeler ATC CD
    • By Pure_Michigan
      I bought this old three wheeler that I found in a barn. It looked pretty rough, but I have it running now and functioning.
      With the switch set to "run" and the key in the "on" position the electric starter does not work when I push the starter button,
      However, if I cross the solenoid it will work and it will start the engine - so I know the starter motor is good and it works.
      Now, it gets a little mysterious. When the engine is running, AND the headlight is on high beam, the electric starter will engage when the starter button is pushed.....When its already running! (when the headlight is off or on "low" the starter button does nothing, only when running and in high beam will you hear the starter motor zing when you push the starter button) So, I know the button actually works, but only after the engine is already running and the high beam is on!
      So to recap: with the key on, the starter button does nothing. crossing the solenoid will make the starter work, and after the engine is running the starter will work with the button!
      Has anyone else had this problem? Can anyone point me in the right direction on solving this one?
      Thanks!
    • By ddiggerr
      Morning,
      Picked up a few new toys and in the process of rebuilding. The links for the ATC service manuals produce an error on the Rapidshare site.
      Thanks
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...