Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

armd1

Racing @ Daytona Speedway 3-9-14

Recommended Posts

71d8c211-7104-4508-9677-39c754852148.png

For all you Sport Quad Racers in the southeast US

Dave Joiner from Fastfridays is promoting the AMA Amateur BIKE & QUAD FT racing this year at Daytona.

For those of you that enjoy FT racing ,there is lots going on next month with all the bike week racing ,there is FT racing in GA, Daytona, Volusia, and Ocala.

* NOTE *

QUADS are only racing on 3-9-14

at the Daytona International Speedway.

Steve Nace dropped the quads from his promoted race dates this year !!

3-7-14

Oglethorpe Speedway 912-964-8200

pooler GA

1/2 mile

promoter

Steve Nace 270-442-7532

3-8-14

Oglethorpe Speedway 912-964-8200

Pooler GA

1/2 mile

promoter

Steve Nace 270-442-7532

3-9-14

Daytona International Speedway

1/4 mile

entry at gate #70

gate fee $15

registration 7:00 - 10:00

riders meeting @ 10:30

pratice @ 11:00

promoter

Dave Joiner 530-878-7223

3-9-14

Volusia Speedway Park 386-985-4402

De leon Springs FL

1/2 mile

promoter

Steve Nace 270-442-7532

3-10-14

Volusia Speedway Park 386-985-4402

De leon Springs FL

1/2 mile

386-985-4402

promoter

Steve Nace 270-442-7532

3-11-14

Volusia Speedway Park 386-985-4402

De leon Springs FL

1/5 mile

promoter

Steve Nace 270-442-7532

3-12-14

Marion County Speedway 352-812-3922

Ocala FL

1/4 mile

promoter

SDTA 863-441-5075

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Dwight Williams
      Ok, so I bought this scream of a deal the other day - a 94 King Quad 300 for $40.00.  It's been sitting outside with no carburetor on it for about a year.  Its rusty, missing some parts, wiring is all cut up and spliced etc.  No seat, no racks but the plastic is all there minus the headlight housing.  Anyway, who can pass up a $40.00 quad right?  I get it home and looked at the sight glass for oil level, it's about 1/2 oil and 1/2 water.  I drain it, refill it and turn the motor by hand (recoil starter is missing) and it turns over just fine.  I worked on the wiring for about an hour and got it to turn over with the electric starter and got enough of it sorted out to get a spark.  Did a quick compression test, 70 lbs.  Wet test bumped it up to 90.  Ok, so rings and cylinder washed out with water for a year, not too surprised.  I thought 'what the hell' and sprayed some starting fluid in it and it ran for about 2 seconds - enough to show  it's got life.  Since then the compression has gotten worse, I can't get enough pressure to activate the carb diaphragm, therefore no fuel pump either.  The compression is now around 60.
        Anyway, my question is....is it worth it to try to get this thing going?  I tore the top end down today and the cam and one of the rockers is pretty worn.  I figured a top end job would be about $100 or so, depending on the condition of the cylinder but I'll probably have to put a cam and rockers in it as well.  Doing some research on ebay I figure I'll have to spend about $500-$700 to make the whole machine right again.  Much less just to make it run and use as-is but I won't really like it until it's right.  I don't mind doing the work, I actually enjoy it but I'm concerned about what all that water did to the rest of the internals, I can't really test it all out until I can make it run.
      I know it's a basket case but I'm not into it much at all, even if I do the top end and find something else wrong I'm still not out much.  I'm leaning toward ordering the top end parts and going from there unless you can convince me otherwise - any way to check the rest of the internals without tearing it down?  I plan on flushing the oil cooler before I do another oil change, I've drained it twice now and it gets milky almost immediately just turning the starter - I suspect the oil cooler is polluted badly.
       
      I'll get some pictures today if anyone want to see them.
       
      thanks!
    • By Skhot K
      Hello! I picked up a YFM400 and I would love to talk shop with knowledgeable co-owners, and I'd love input about the machine from anyone here who clearly knows more than I do! Cheers from NY
    • By Mike8623
      OK guys, Ive got a 1996 suzuki king quad 300. Just where and how do you get to the CDI unit on these? Is there a way to check these if you dont have the suzuki tool or meter?
    • By Dra O
      posted a while back - it was running at one point - I have all the plastic shroud off - it's down to frame and engine now
      -fuel pump: when line from petcock is attached, no fuel comes out other side to carb; the line to the carb is open (can blow through it); I thought when I cranked engine that the pump would spit out fuel on other side but it does not; I removed fuel pump and opened it up - diaphragm looks good - but internal areas had lotsa calcification build up - I cleaned this out and dried it good - the clear plastic pieces (?diaphragms) aren't broken - the spring w/ steel ball on end moves freely; am putting it back on tomorrow; but can anyone answer about the pump? isn't it supposed to pump fuel through it... to other side... to carb? puzzling
      -along with fuel pump: I replaced petcock 3 weeks ago (gas tank had rusty fuel in bottom - cleaned it out prior to new petcock); when I turn petcock arrow NOT to on or reserve, fuel comes out of line; when I turn it to on or reserve, fuel doesn't come out; puzzling
      -I don't know what's on back of fuel pump - it's a valve that has a hose coming out of it - looks like it goes to engine/carb - I haven't traced this out yet - what is it?
      -can squirt gas on air filter and engine will run for 2-3 seconds then stop - fuel in top of carb (under diaphragm) does same
      -it likely needs carb rebuild - will get to this - but something isn't allowing fuel to get from fuel pump to carb
      -I THINK it has a mikuni model x carb - diaphragm is ID 26mm  OD 68mm - hard to find inexpensive diaphragm, I guess because it's a model x
      -last thing - I replaced solenoid due to old one clicking; I HAVE to be charging the battery or it won't start/turn over - battery just goes dead; but if charging, it'll turn over nicely; i'm guessing it's a bad battery
      -any help appreciated - I've never owned an ATV before - inherited this beast from grandparent in-law
  • Similar Tagged Content

    • By hangingon
      I just order one for my ltz400. An after the fact ? anybody on QC used the kits before & if so did you like it & did it hold up?
    • By trev0006
      Vintage Motorcycle Racing

      23 pictures in the gallery
      Motogp Fails

      19 pictures in the gallery
    • Guest Derekjon94
      By Guest Derekjon94
      I am looking to get a couple of trail riding toys for me and my buddy but I cannot decide what to get because I dont know enough about racing style 4 ATVs. I have always been a fan off Hondas and I have a 420 Rancher that Ive never had any problems with but I didnt know if that was the way to go for a more fun ATV. Any input would be apprectiated!
    • By mojaverider
      If any of you girls are close to oklahoma, the series I am racing has added new classes for the ladies. The series is Oklahoma Hare Scramble Championship Series (OHSCS). We now have a long course that is 1.5 hours and a short course that is not as technical that runs for a half an hour. If you race or want to try it out, the first race is on March 3rd in Konawa Oklahoma. Let me know if your interested or have any questions.
    • By BRSpeed
      Monster Truck Freestyle with Black Stallion and Higher Education plus a JET POWERED ATV will toast a car into ashes along with our Full Racing Program and the 600 Micro Sprints (No Late Models this week).
      Friday July 13th at 6:45PM
      Black Rock Speedway - 82 Main Street - Route 14A - Dundee, NY 14837 :: 607-243-8686
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...