Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Recommended Posts

Hello I just got a 1984 Honda big red 200 three wheeler from a guy and it hasn't been run in about two years. I got it started and rode it around for a minute. I need to put new gas in it wich I'm sure will help. But when riding it, it smokes pretty bad and also only stays running with the choke on. It'll run with the choke off but I gotta feather the gas to keep it going. I'm going to clean out the carb but besides that any pointers for a first time three wheeler owner would be help ful. I've rode them my whole life just finally own one now.

Thanks in advance for any information

Share this post


Link to post
Share on other sites


the carbs are really easy to work on, clean it out good, fresh gas and run a few tanks with sea foam in it. you will need rings too. clean the tank out really good too. pretty basic bikes to work on. im in the process of rebuilding 2 myself ... you have the big red 200es ?

Edited by oxidized_black

Share this post


Link to post
Share on other sites

Hello, yea they don't look to hard. Okay, when you say foam you mean see foam? How much do you recommend. And that's what I figured was piston and rings.Wheres the best place to get parts for theses at? I traded a guy on craigslist a skil saw for it. All I know is that it's a 200 I'm not sure if that is a 200 e's unless that stans for electric start then yes I have electric start

Share this post


Link to post
Share on other sites

i think 84 big reds have electric start, shaft drive, high/low/reverse ... check the vin tag at the gas tank front and where the handle bars slide in. sea foam is the product name and i would 2 times the recommended dose ... i would shop online for the best price, wesco pistons and rings are good ...

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By thegipper
      Have replaced, Carb, fuel pump, CDI, plug, coil,fuel filter. Will crank but not srt. Getting spark and battery is fully charged 12.6V
      Any suggestions????
       
      Thanks
    • By Tiffany Rowland
      I recently purchased an 07 Honda sportrax and when I was checking the spark plug I saw the boot was ripped nearly in half. When I removed the plug it was blackened and covered in oil. How can I thoroughly clean the plug hole and remove any debris that is in there? Is there a small tube like vacuum or something of the sort made for stuff like this? The machine my dentist has would be perfect, maybe they do rentals! 😁
    • By Travis Johnson
      My 1988 Honda 300 fourtrax has a short all of sudden neutral light works but when I put on headlight nothing can't start it unless kick start please help
    • By StolenATV
      Stolen Honda Rancher 400, 2004 ATV. Stock. Front bumper bent. One screw on carb stripped. Cracked screen on speedometer. Color red. Arizona plates and register. VIN 478te294144005084
      The post Stolen Honda Rancher 400 – 2004 appeared first on STOLEN 911.
      View the full article
    • By Connor Tuftin
      I have a 1988 300 Honda FourTrax, All wheel drive.
      My brother and I were fixing up this quad. We put a brand new battery and fuses in and it was running fine until we put the quad into reverse. As soon as it was put into reverse all of the electrical cut out and power wasn't making it to the head unit anymore and both of the brand new fuses popped. We figured there might have been a short from the starter or solenoids, but they are all working properly. At this point we don't know where to start looking for where the short could be. I'm just wondering if anybody has had the same issue or knows of similar issues that could cause these electrical shorts?
  • Similar Tagged Content

    • By mallen14
      Looking for anybody who can point me towards a free service manual for 1998 Big Bear 350. I found the sticky thread but all the links, from 2012, no longer work. If anybody has one please let me know. Thanks
    • By dctaz37
      My ATV started making a rubbing and clunking noise. I took the skid plates off and found that the front u-joint on the shaft that connects the front axle to the transfer case is toast. My manual does not reference this repair. Looking for instructions.
    • By Barrysquad
      Somehow I lost all of my spark on my 350Big Bear, its a 1990. It ran well for maybe 3 days! Thought it was the carb. Cleaned it 4 times. It was losing power at midrange. Got worse and worse. Finally nothing!
      Are these good coils? I was thinking I could swap?
      2002 Honda-200cc: primary 0.4(ohm-200) secondary 9.0(ohm20k)
      1990 Yamaha-350cc: primary 0.8 secondary 11.0
    • By dboy910
      Ok new to group and new to quads. I picked up a 88 Big Bear for next to nothing but it has issues. The entire high low revers shifter has been removed. All I have is a bar attached to the linkage. I can shift into all three but I would like to replace or get suggestions. I have looked around but there is limited info or pictures on what I would need to buy or where it even mounts. Any pics of what where and how it works would be great. Or direct me to correct thread.
      Thanks
    • By schmeck
      Anyone know of a good repair besides replacement for the ever cracking Big Bear 350 intakes. Replaced with a Zoom Zoom about two operational hours ago and the new one is cracked.
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...