Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

executioner

2002 400 sportmans no reverse

Recommended Posts



Does it have no reverse or no 4x4 in reverse..also, does the speedo work? It actually powers the awd..power runs from the awd switch, to the coils,then to the speedo, then to the ground through the speedo

Edited by fartknocker

Share this post


Link to post
Share on other sites

Test the magnets,should be around 24 ohms.

are there any broken wires?make sure speedo is working and grounded properly. Is the AWD switch lighting up? Should have 13 ohms going to magnets... Is there magnetism at magnets?

Share this post


Link to post
Share on other sites


99% chance speedo is the reason for no 4x4. Does the speedo log hours properly? If not it's probably the speedo head itself. If it logs hours but the trip meter and mph doesn't work then it may be the speed sensor on the right wheel. It's on the brake caliper bracket.

You can try to wire up.a hard ground first, the wire coming from the hubs goes to Pin E at the 6 pin( large connector) at the back of the speedo

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By gareth leifheit
      Ive got a Big Bear 350 4x4 that has been sitting for a couple years. It was put away running but now the pull start wont move and the starter wont turn it either. Any ideas what I can lube up or bang around to loosen it up? Thanks
    • By scot91
      Hi guys im new to the forum and i hope i put this in the right spot. But im putting this up for my uncle. But he has a 2002 Bombardier quest rotax 650 4x4 All wheel drive. Now i was driving it down the road today and all sudden it shut down i thought it ran out of gas but it didnt. After it shut downi pushed it to the side of the road and tried to crank it over but it wont crank over. It is a electric start none of the lights or anything work So what i was thinking its in the wiring somewhere right? Does any one have a website that has a wiring diagram for this 4 wheeler or does any one know what else it can be? If anyone has any idea please let me know everything willprobley help thanks guys!!!
    • By flyinbrian365
      View File 2002 Polaris Magnum 325/500 Service Manual
      2002 Polaris Magnum 325/500 Full Service Manual
      Submitter flyinbrian365 Submitted 05/14/2020 Category Polaris ATV  
    • By Ryan Hutton
      Hey guys i am new to this site. i have a quadmaster 500 and last year my brother in law had it out and brought it back. When we went to put it away it wont move now any suggestions i have the belt cover off now. With it jacked up it seem to take gear when its not running.
    • By Nick Brooks
      Working on a 2002 Quest 500 and the grommets in the tank are rock hard and leak.  Any tips on replacing without having to pull the tank, hands are too big to get to the bottom gromment which is the worst one.
  • Similar Tagged Content

    • By Jean de la Chevrotière
      View File Polaris 700 2002 Owner's manual
      Polaris 2002 700 Owner's Safety and maintenance manual
      Submitter Jean de la Chevrotière Submitted 12/01/2018 Category Polaris ATV  
    • By Jean de la Chevrotière
      Polaris 2002 700 Owner's Safety and maintenance manual
    • By priglmeier
      I own a 2002 Can-Am Quest 650.
      It will start if you massage the throttle a bit and it will continue to run. BUT if you let go of the throttle and try to let it idle it will always die warm or cold.
      It has Non-Oxy premium gas, a new gapped NGK plug, a new carb (as of today) and fresh fluids. After installing the new carb it runs exactly the same.
       
      I only have a few things that I have observed since the new carb:
      The choke still doesn't do anything. It has a good cable and it is hooked up. It on fully off. There is a cable in the top, front of the engine that splits into two connectors. The connected side is in the photo. The other side has the yellow banded section and is not connected. I do not see anything in range of this connector so I don't know if this is normal or not??? The original carb wasn't really dirty or clogged. I'll use it as a spare. I don't see this cable and connectors listed in the Can-Am shop manual. Looking for some help. I want to ride!


    • By Billie
      :confused:need a repair manual or help in what to look for thank you Bill
      for you muddober to make clear to you the neutral light and the gear light
      do not light up win shifting fuses are good Iuse my CAt for hunting im dissable the atv is my leag s thank you
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...