Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

redshirt

2005 Quadrunner Z400 HELP!!!

Recommended Posts



Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By charliedawg
      can anyone tell me why this 95 scrambler backfires so bad itv blows the pipe off ive replaced reedvalve crank bearings fly wheel it doesn't do it all the time was thinking maybe the over ride button or shift senser if it has one I'm pulling my hair out trying to figure it out any ideas would be appreciated thx the dawg
    • By Samuel Jerome Morris
      I bought a 360 prairie that was having a problem with a backfire through the carb . The thing is making me crazy ! I have changed plugs , coil ,cleaned the fuel tank , rebuilt the carb 2 times and tried another on it that ran fine , checked the valves and finally changed the head thinking it might be a valve because when I got it it had a bad intake boot which I changed . Nothing has helped so far . Anyone have any ideas other than a gallon of gas and a match lol .
    • By Quad man34
      I got a 2007 YFZ 450 I can get it to start off the starter it turns over by won’t fire and I have to push start it then it runs good but back fires when you let off the gas and then I let off the gas completely it shuts it’s self off so you think that I need new valves or adjust the valves 
    • By kvf700
      New member here and looking for help.
      At 200 hours the check belt light came on. Removed the converter cover checked the belt and followed instructions for the reset. Now I have a miss that starts at 35 mph and it won't go past 50. It acts like you are turning the key off and back on. Pretty well ruled out carburation and fuel flow.
      When I had the cover off I started the machine and noticed later a warning not to do that.
    • By michaelpr
      89 kawasaki bayou 300 4x4 changed carb the timeing is good valves are ok intake boot is ok will not run unless i hold the choke still poping and backfireing
  • Similar Tagged Content

    • By Mo Salem
      So my front hub broke, I’d like to put aftermarket on. Hard to find new oe ones. Please help. I’m new to all of this, I have some car knowledge and try to apply it
    • By oxidized_black
      tag : zukifreak
       
       
       
    • By LMI
      Was using the quad the other day to shuttle wood from my pickup to my wood pile.  When the job was done I turned off the Quad and heard a bit of a racket from the front end.  When I got down underneath the sound seemed to be coming from the fan housing.  fan was moving in spurts and not quickly... much like a computer case fan that's had it's day.  What I know.
      Temp sensor is ok, as the fan tries to activate fan is getting some voltage as it is attempting to spin.  When I first bought it used I tested the fan direct to battery and it was fine. The fan was working ok even not direct wired as I went on a couple of rides and when stopped and idling the fan did run Seems to be free spinning with my finger read up in the manual and they require me to drop the rad.  now I'm not opposed to that as the rad has some damaged areas I want to try and straighten out.  But if I can get the fan working without, I can leave the rad as it is until next year.
      Fan assembly is about 300 bills, any work arounds or alternatives?  I even thought large computer case brushless fan.  smaller ones are about $7 larger ones better quality probably far below the 300.  They run standard 12v DC.
      Anything I should be doing before dropping the rad... other than check for obstructions even though it seems to spin, and trying to hardwire it to the battery again for a test to see if it acts the same?
    • Guest Fox300exchic
      By Guest Fox300exchic
      The Hop-Up: You may be saying to yourself, “that’s a chick bike,” and you’re right. But honestly, it’s so much more than that. It’s one badass bike. http://www.quadmagazine.com/quad/features/article/0,24942,1587044,00.html
    • By gregj49
      Blows out black smoke when you rev it up how do you adjust the carb?
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...