Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

wolverinepilot

2006 Yamaha Wolverine - Exhaust Help

Recommended Posts

Hi all just been looking to upgrade my exhaust pipe and it seems I am very limited as to what there is that is a direct fit onto a 2006 wolverine. My question is will the exhaust slip on pipes for the 400/450 kodiak and 450 grizzly bolt up directly? Have it narrowed down to a big gun evo or a mbr 6000 from a local dealer but they are all listed for the kodiak and grizzly not the wolverine. Looks as though a big gun may be what I want for performance and sound but the price is $445 compared to the $235 Mbr. Does anyone have any input on this subject?

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By MarkinAR
      Can you believe this thing blew a new head gasket after a few weekend rides? Granted, it was beat on in a mud hole every weekend, but this is a new head gasket on a 400 Kodiak. Bummer. 

    • By StolenATV
      Taken from my car port around 0330 and was taken by at least 2 people found footprints pushing the quad all the way to the road (80 yards)
      The post 2012 Yamaha Grizzly 700 EFI 4×4 Stolen appeared first on STOLEN 911.
      View the full article
    • By mothrottle
      The VIN on my 2018 Kodiak 450 is not where it's supposed to be. I bought this used. Is there another "hidden" location where I can find it? Need the number for insurance co. Thanks in advance.
    • By cliffyh
      Hi,
      Have a 2005 grizzly 660. Just recently started backfiring and showing incorrect speed. Lifted seat and messed with wire going to starter relay, it stops for a bit but seems to come back.
      I ended up pulling all the pins out of the connector for the relay and added new pin/connectors for all 4 wires. fixed it for a little bit but came back shortly after. This was a new starter relay i installed a few months ago. Anyone know if a bad starter relay would do this? 
    • By Sp33dy0000
      Hi can someone please give me some sort of idea I have a Yamaha 600 grizzly four-wheel-drive I have put a new coil and a new stater and Pulse stater on it with new plug and steel can’t get any fire
  • Similar Tagged Content

    • By M0BJT
      Hi Everyone
      This is my first post and I was wondering if there is anyone who can help me solve a problem I have with my Yamaha Kodiak 400 4x4 Fitted with a Mikuni Carburetor . The year of the quad is around 1998, the reason I am not sure of the date is, there wasn't any paperwork and no details on the frame either.
      The quad had a bad leak from the carb overflow which indicated that the float needle valve was blocked or passing so I replaced this and put everything back together. The quad ran really well until I took it onto some rough ground to have a ride around, a few hours later the engine started to run really rough as if the engine was flooding. I have removed the carb again and cleaned the needle valve out and the whole of the carb just in case there where any dirt behind it. Engine now runs fine again but fuel has started to run out the carb overflow again.
      I have tried everything to try and stop the fuel leaking out the overflow but its still happening. My last thoughts where to adjust the float level and its still happening.
      Has anyone got any thoughts on the problem or could suggest whats causing the fuel leaking out the overflow.
      Thanks for reading
      Kevin
    • By greatwhite
      I looked through many of the threads and could find it was wondering if anyone could post a link to a PDF Service Manual 2008 Kodiak 450.
      I found one for 2005 but I am sure there are differences.
      Thanks all
    • By marcuslachance
      I
      I bought a Honda 250sx 1986 but the exhaust is broken. Apparently it's not possible to order a new one. I checked to order one on others compagny but there's noting.
      Do you know which exhaust it's possible to install. Is there a company who sold an exaust to fit on my 250sx.
      Sorry for my english
      Thank you
      Marc
    • By Ironfist104
      My wolverine has a new carb kit, new battery cranks over and over take it to the point of killing the battery to start sometime.... but it I give a tug on the start rope while I'm cranking it with the starter it fires right up.... any advice?
    • By ej200421
      i was wondering if i could get some help. i been trying to locate where the fuel and air adjustment screws are located on my 95 kodiak 400. i think i found the fuel screw.. i know where the throttle adjuster is but i cant find the air screw. or is there an air adjustment on these carbs?
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...