Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

LTZ400IsLife

Suzuki LTZ 400 Stalling Issue

Recommended Posts

I recently purchased a 2005 Suzuki LTZ 400, for the first few days it ran like a champ but now when it gets hot, no matter what you do, it will stall out when you stop. Even going from 2nd or 3rd gear it still stalls out. It still runs perfect, it just stalls when I hit the breaks (hard or soft). I don't know much about quads so I could use some help.

Share this post


Link to post
Share on other sites


First you should download a manual for it if it's available on the forum here, or get from another online source.

How does it idle? Might consider turning that up.

Share this post


Link to post
Share on other sites

Check your air cleaner and spark plug. Make sure your carb air intake and outlet connections are secure. Beyond that suspect your carb needs to be cleaned or re-built.

Share this post


Link to post
Share on other sites


Suggest checking valve clearance too. You have a tappet shim setup which means you have to buy shims if it needs adjustment.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By crochet homemade
      I have bought a 1996 suzuki king quad 300 and I have noticed that it smokes but I have put oil in it and plenty of gas had to fix shifter bc the nuts and bolts came out somewhere. I have had to replace the wire for the starter but now when I try to start it it wont idle at all and when it does run it smokes really bad like a whitish blue I guess, and it likes to stall a lot. So anybody can help me out please and thank you

      10000000_310855426253462_714534016610467840_n.mp4
    • By Stephanie Webb
      please help cant figure out how to bypass rev limiter in my suzuki quad master 500
    • By Ted Aregi
      I've got a king quad 750cc has anyone converted the fuel pump relay to a stronger fuel pump relay on there king quad?
    • By Richard Paradise
      My 1997 Beg Bear got stuck in 2nd Gear when parked on slight hill, otherwise in perfect shape. Trying to get it into neutral, by rocking it back and forth won't release out of gear.
      Any suggestions, It's my work horse and I keep it in to shape, got to get it running..
    • By Brandon Bollinger
      Doesnt seem to make the sound all the time. Mostly does it under load or going up an incline. Its kind of like a clunk and or grinding noise, Kind of hard to decipher. Today while going up an incline it actually stopped and it sounds like something spinning and then it ingauged again and it would move. I checked the clutches and installed a new belt before it did that also. Rear drive shaft seems ok where U joint is too. Has all new rear CV shafts and bearings and al new bushings in rear arms. Also flushed out the rear Diff with no shavings. Any ideas or where to check. 
  • Similar Tagged Content

    • By Wali
      I was riding my 400ex one day and when i shut it off to put it in the garage i tried to start it put again to drive it into the garge and it wouldnt start.I put a compression tester on it and its like 30 psi with out throttle and 0 psi WITH THROTTLE.
      when i put my finger over the hole it fell likes its pulling my finger in more then its pushing it out 
       
      Has good spark.When i took it into the shop the said it had 1oz of oil in it and a tiny pit of metal shaving(TINY BIT LIKE 30 flakes)
      When i try to pull start (push start/roll start) it made a not normal sound  and wouldnt stay running.
      If my bottom end is blow why would it still turn over fine,
      Are my valves siezed or not working properly 
      or is my timing off causeing valves to not open in correct order with fire 
      PLEASE HELP all help is appreciated 
    • By Hunter Aldridge
      Some times I get spark some times not can ride then it just dies and wont get spark it has new cdi box and stator but I don't know if it has the pickup coil I'm at a loss
    • By William Sims
      I have a 400 4by4 ,2005 green model,
      wounding how many different CDI boxes will work on it
       
    • By jerry houston
      Eiger 400 Suzuki runs fine Cook-Out joke face off the handlebars put it back on and will not start now will crank no no spark
    • By colin james
      View File 2012-2014 Polaris Sportsman 400 HD Service Manual
      This the factory service manual for the 2012- 2014 sportsman 400 hd service manual 
      Submitter colin james Submitted 02/08/2019 Category Polaris ATV  
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...