Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

cooper6558

1995 Suzuki QuadRunner ATV

Recommended Posts

i am having stating issues. my electric start has stopped working. the green neutral light comes on and the red reverse light comes on. i can pull start just fine.

i would also like to find a service manual for this atv. there are alot of them out there but i don't want to pay those high prices for it.

any help would be greatly appreciated

thank you

Lee Cooper

Share this post


Link to post
Share on other sites


Assuming you have a LTF250, you need the Cylmer 1987-1998 Quadrunner- King Quad manual. This website doesnt have it but you can find one elsewhere online relatively cheaply. Ebay is a good source.

Are you getting power to your starter? Is your battery good?

Share this post


Link to post
Share on other sites

Battery is up and the only wires going to starter are the ground and one that has 2 nuts . There are no power going to the one with the nuts . Checked it with switch on and button pressed. Also have pressed button and changed gears and back to neutral also tried moving the reverse and no luck. It got dark and cant see if there any more wires go to the starter the only ones i could find are on the right side with ground on lower side and the one with the nuts on top right . It is also set in the run position .

Share this post


Link to post
Share on other sites

You are right, only two wires to the starter. The hot wire is on the starter case attached with the nuts. Ground wire on a starter mount bolt.

Check your fuses next then power to your starter relay. Attached block diagram and WDM.

starter circuit.jpg

WDM KQ.pdf

57d7734bc4cd7_startercircuit.jpg.4ee5f5099f9666fbc3f252009b152586.jpg

WDM KQ.pdf

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Stacy Hanks
      I have  2000 Yamaha bear tracker 250 - igniton relay and starter relay both were replaced also the neutral switch indicator was replaced-- bike will not show light on for neutral or start when button is pushed
       
    • By orvilleortiz538
      So My 07 Kymco Mongoose 300 was having a bit of choke issue and I have an Ultrasonic and decided to dip it in for a good clean up,and now the atv don’t want to start,it tried but it backfired a little bit but still won’t start,any suggestions?
       
       
      Sent from my iPhone using Tapatalk
    • By Sonders
      It appears that the Service Manual thread at top of forum is dead as all the links no longer work.  I'm actually looking for service manual for a 2000 KVF300 Prairie that I just picked up.  Does anybody have link to one that they can share, or know where I can find one?  Thanks in advance for any help.
    • By 79davecampbell
      just bought a 2000 polaris 325. was told i vould pull start and ride but needed new battery for electric start. so bought new bat and charged it but nothing. while spraying with a hose after a ride it all came on. neutral light cooling fan and then quit. checked those things in the black bag and power at both ends. starter will roll when i jump solenoid. power to the ignition switch jumped that but still nothing. maybe switch for headlight and starter? NEED HELP PLEASE. 
    • By Freezeman
      Thought i would share a fix that I came across. I was working on a 99 scambler 500, The customer complaint was that even with the fuel shut off the tank would slowly drain out onto the ground. First I found the fuel shut off was bad/ leaking/ dripping so I installed a new one thinking that would fix it. Then I ran it and and seen that the overflow was flowing fuel out from the bowl. So I cleaned the needle and seat and changed the float height to lower the fuel level in the bowl. Well... It still overflowed and flooded. So I bench tested the needle and seat with a pop off tester. I found that these newer style needle and seats just utilize an o-ring to install the brass seat into the carb.
      The o-ring for the seat had hardened up allowing fuel into the float bowl from under the seat. New o-ring and problems solved.  
       
        
  • Similar Tagged Content

    • Guest Fox300exchic
      By Guest Fox300exchic
      Indicators that tell you to check your toe-in.
    • By Jers
      I need to know what I have and what tire really go on it, Mine has 24x11x10 on the back and 22x8x10 on the front and I need new tire but I don't think are the right size. Also I can't find the model number listed but it looks like a 250 quadrunner 2wd and I think it is a 1987 maybe, can anyone help me, also I it has a rich running sound and I put a carb diap in it and cleaned the carb. is there a jet needing replaced?
    • By buzzar56
      I am looking for a free repair manual for a 2003 Polaris sportsman 500 ho atv. all the posts on here lead me noplace
      thanks fred.
    • By pickytar
      I have a Chinese Hybird 250 or that's what I was told it was. I found 17 numbers on the frame. Will these numbers tell me exactly what it is that I have? (I know that its a 2006 from a plate on the front)
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...