Quantcast
Jump to content

  • Do you own an ATV or UTV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

New to me quad, vin search not working, now what?


Recommended Posts

I took a quad in trade and was told that it was a blaster, thats it. Tried using the vin decoder in the stickies, but that didnt work. Tried other decoders none of them work.Im taking the vin from the frame in front of the foot peg, that matches the numbers on the engine, and when I put it into a decoder it tells me the vin isn t right. What can I do? thanks

Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Tagged Content

    • By Atvandy
      Hi there have just bought a quad which i believe to be either a 125 or 150 2 stroke on vin plate it says make pony anyone ever herd of it ?



    • By h1000101b
      STREET LEGAL - ONE OF A KIND HARLEY DAVIDSON 4-WHEELER $9,500 OBO Sporster 883 bored to 1200cc built into a Street Legal Licensed and Insured 4-Wheeler. It has 400ex front end, 250r Rear end. All chromed out with new black gloss paint. I have a $500 Dakota Digital Speedometer to go with it (needs installed). I also have an extra rear gear and extra set of off-road mud tires and rims. Brakes need to be adjusted, and there's a few other touch ups that will place it into show quality. I haven't started it in a while. Ran Great last run. This bike has over $20k invested in work and time. It will go about 120 mph or more. With the other gear it will go about 60 mph. It rides great on and off road. It brings trophies and turns heads at shows. Shoot me a message or offer if interested. (May entertain trades). I will entertain any offers. This is your only chance to own a Street Legal 4 wheeler. Currently titles and registered in KY.




    • By Dana Hudson
      Hey everyone, hoping to get some help here... my kids 03 KTF 50 Quad has always ran great... they were riding it a couple of hours a few days ago and it died a couple of times (not normal) but started right back up. A few days later my 5 year old wanted to take it for a spin so I started it (2 pulls) and he took off.. he made it a couple hundred yards and it died and we havnt been able to start it since. I have new gas, good spark and 120 psi compression.. it will not start with starter fluid in the intake or even in the cylinder.. the fuel bowl has fuel at the carb... what am I missing? It’s driving me crazy!!
    • By oxidized_black
      tag : zukifreak
       
       
       
    • By LTZ-Zach
      So i was riding the other day and my quad randomly shut off. It started back up and ran completely fine for a little while and then it started idling terribly.
      I cleaned the carb and changed all the jets and everything except the float due to the rebuild kit not coming with one and it actually runs worse then it did before.
      It will run and idle decent now but when I give it gas it dies.
      Does anybody know what could be wrong?
      I also changed the spark plug and air filter along with the oil and oil filter.
       
  • Similar Topics

    • By SashaGraves21
      I want to know a general consensus of which quads are really spectacular machines that are well made and can rip your head back. Give at least three pieces of evidence for which you pick! Let’s see where this goes!
    • By Arizona
      So i have had this trx 250 that i brought back from the grave. Long story
      but got it running and the master cyl eye glass was broken out so it hasnt worked in years. 
      I replaced it, filled and bled the cyl, bled the brakes, I dont see any air coming out when im bleeding them
      but no matter what no pressure on handle. Will stop the turning wheel if spun by hand but wont hold at all. 
      I adjusted the brakes also, checked for leaks at the brake cyls, all good. No leaks at lines or fittings, I have put a lot of fluid
      throught them and i know the routine as i did brakes on autos for years. Have new washers on master cyl, I would hate to replace 
      parts knowing their good. Funny thing, few years ago same style vehicle i bought same broken master cyl and same problem after
      replaced. No pressure, Any ideas? Pretty simple system but maybe you guys have had similar problems. Thanks Az
      Just so you know I have replaced the complete master cyl, not just the glass. Az
    • By JPRICE1981
      Hello everyone !! Looking for some help !! Im wanting to check my stator and pick up coil with a ohm meter and cant seem to find a guide that tells me what to read and what my reading should be !! Any help would be great !! THANKS IN ADVANCE !!
    • By Andidy12
      I have a 05 king quad 700 that runs fine when its cold. When it heats up high and reverse wont show up on the display and high will go to 15 mph then bog down.. Any ideas?
    • eManualOnline
    • By rolorox
      I got a 1996 300 king quad 4x4 wondering if a 1998 500 king quad engine will fit and will it hook up to the 300 transmission thanx
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...