Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

A-Lert

2013 Ranger 800 EFI wont start

Recommended Posts

I had a dead battery. Replaced it and now wont start. I press the brake, turn on the key. The lights come on & fan also but it does not turn over. I noticed that the brake lights do not come on also. Is there a relay that failed somehow?

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By seacoast603
      2014 Polaris Sportsman 400 HO
      We had an issue with the lights working on occasion.  Then they just stopped working completely (front and rear). We looked at the EFI fuse and it was melted, but not blown.  We replaced the fuse, but now the ignition will not turn on UNLESS we pull the fuse out...and BTW, the lights still didn't work with the new fuse. Any help would be appreciated. Thanks!
    • By Thomas Brooks
      I know...I feel stupid for asking.  I find it impossible to use the thumb throttle with my thumb when I have the bars turned full right. I have to reach across the top and grab the throttle from the front with my fingers. It isn't very smooth and I can't help but think that there must be a technique, mod or adjustment for this. How do I get past this?
      Thomas
      2017 Polaris Sportsman 570 X2
    • By Mark Walters
      Hi guys.  First post, hope you can help.  As above 1991 Honda fourtrax.  Starting, running fine until a few weeks ago. Used primarily to put my ski boat in the garage (put 2" ball on front).  Any way, had just backed boat into garage, turned off to crank trailer wheel down, when I went to restart got nothing.  
      No neutral light, no headlights, no reverse light, would not turn over when start button pushed.  It would crank and run when I jumped the contacts on the start relay.  While running the neutral light will come on, although it is dim and flickers.  Reverse light on when running and in reverse.
      What I have done to this point:
      1.  Used jumper cable to ground battery (-) terminal to engine block thinking ground wire from battery to engine may be bad.  No neutral light, no start.
      2. Applied 12 volts to start relay.  Got a loud click like it was making contact.  I didn't have the battery/starter cables connected to the relay, but I am assuming it would have cranked at that time.  
      3. Disconnected neutral switch wire.  Grounded neutral switch wire with jumper wire. No neutral light, no electric start. 
      At this point I am thinking ignition switch vs broken wire in the harness going to the neutral switch (due to dimness and flickering when running).
      Any and all suggestions to help track down this issue are appreciated.
      Thanks
       
    • By uzejo
      My lakota has a new carb and just had a top end redone by a professional, but it will not start. The electric start turns it over great, there seems to be compression. It seems like its trying to start, getting right there and just doesnt catch. It does start occasionally, but wont run for more than a couple of minutes and smells rich. Im assuming the carb needs to be tuned, but im just wondering if anyone else has any ideas before i get a chance to work on it.
       
      Thanks
    • By Ed Zeppeli
      Hi all,

      I picked up this quad after the previous owner couldn't get it going.

      The issue is that I can't get it to fire at idle or at all.

      I've...

      - replaced plug. Decent blue spark. Also tested with spark tester inline.
      - rebuilt the carb. PO had already bypassed vacuum lines from petcock. There's fuel at the cylinder
      - Checked compression with new gauge. reads 190 psi
      - cleaned all contacts I could access.
      - am currently jumping with car battery. Solenoid jumpered.
      - checked cam timing at TDC and adjusted valve lash
      - put gas directly into cylinder to see if it will fire at least momentarily

      Motor turns over well. Plug gets wet. 

      Motor may fire once or twice but smokes through exhaust a bit as if it's trying to fire or combusting.

      This leads me to suspect timing. As mentioned I checked the flywheel mark versus cam marks. Perhaps someone has been in there before because I can't find a 'T' on the flywheel but there is a very visible paint mark which aligns with TDC position on piston. Possibly a slipped flywheel/woodruff?

      Is it possible that if it had seen previous repairs, that the timing could still be off? I'm reluctant to dig into the flywheel/stator area if there's something else I could have missed but all signs point me to that area. Would a bad CDI cause spark timing to be off?

      Anywhere else to diagnose incorrect spark timing?


      I've scoured these forums and elsewhere but I'm posting just in case there's something I've overlooked up until now.

      Thanks very much for reading!


      Warren
  • Similar Tagged Content

    • By Ironfist104
      My wolverine has a new carb kit, new battery cranks over and over take it to the point of killing the battery to start sometime.... but it I give a tug on the start rope while I'm cranking it with the starter it fires right up.... any advice?
    • By izzydum1
      Any ideas on what would make a coil not fire? She was running fine, then began slow start. Now wont start at all.
    • By Suzuki24
      I have an 04 ltz and it started sputtering a little bit while going down the road and I was low on gas so I just figured that's what it was. But now I can't get it to start I completely cleaned the carberator put a new spark plug and coil pack in it and all it does is turn over. It has compression it's getting fuel and it is sparking but all it does is turn over any idea what it is??
    • By Mikes700efi
      I just bought my first arctic cat. I changed the oil and filter. Now my atv smokes only when u rev the engine. Smoke looks white grey.. slight light blue tint.. when it. Idles it doesn't smoke.. Any body have a clue what is going on. The dealer said it's not the rings.. it has the 700cc suzuki engine..
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...