Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Recommended Posts

Hey guys an girls I need a little help. I bought a new carb for the wife's 350 and it runs good.

It just doesn't seam to have the same power it did before I changed the carb.

I bought a GYTR jet kit pt#gyt5yt980000 it's just main an air jets. The bike is stock and I dont know which jets to start with. The kit has 2 air jets an 10 main jets. Does anybody know where

To start. The kit did not come with a needle jet. I bought it off ebay and it was unopened

When I got it. Any help would be appreciated ALOT.

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Ellery Zandt
      I have no idea where the antifreeze line coming off the thermostat goes too. The carb two nipples in the pic create a vacumme. Can someone help me on this please....!!! my email direct is [email protected]!!!!
    • By JacobSlabach
      got 7 atvs off CL recently for a good price.  one of which is a yamaha warrior.  anyone know where the vin is printed on this bike?  Haha good place to start as I do not know year or size yet.  The former owner says needs exhaust ans and clutch work.  he said it ran fine until the clutch cable broke and then I couldn't get the new cable adjusted right and it would grind gears.  things I see:  clutch cable locked up again, no brakes, carb leaking (green with algae around the bowl and has gelled gas stalagtights on it), aftermarket exhaust melted the airbox so I need something different and a new air box.  I would like the use the current exhaust if I can but I have a feeling its a redneck fix as it looks like there is an ace bandage holding it to the exhaust pipe (its an aftermarket slip-on exhaust), so I'm not sure about that- lets get the bike running first.  also, battery (looks brand new, what a shame) is dead, 0 volts.  Otherwise, bike looks to have not been wrecked, and plastics are ok (it sat outside under a 'tarp' for 3+ years since it was run last).  any tips and advise on where to start first would be awesome as this is my first clutched bike (manual).
      the clutch is my main concern- I've never rode a clutched bike so I dont even know what its supposed to feel like.  lol I'm spoiled on my automatic polaris 
    • By John Dunn III
      Just bought a LT 230 anything I should watch for. It runs and drive good. Just don't want no surprises 
    • By Ellery Zandt
      Does anyone have a redcat 250 or falcon 250cc that they can share where the two vacuum lines on the carburetor that you run antifreeze through I honestly have no idea where the lines are suppose to go to circulate the antifreeze. 
       
      Any help is greatly appreciated. 
       
    • By bradley nelson
      Im cool with the police in my area so i can ride on public roads.
  • Similar Tagged Content

    • By Nate Hanson
      I am a new atv owner...I bought a used atv this summer (pretty sure it is a wolverine but reg card from last owner didnt actually say that so idk for sure). It ran great for most the summer and early fall but one day I tried starting it and it turned over a while without starting and then suddenly it quit turning over at all. No click or anything.
      I charged battery and light turns on showing neutral and heatlight can go on.
      A few other things that may be pertinent: The pull start is missing, I have a fluke multimeter but not many other advanced tools (or relevant experience), there is an extra aftermarket led light attached to front but it doesnt work either... never looked into why since I didnt need it. 
      I looked for a fuse box and didnt find one.
      Please recommend some easier things to try first as I really want to avoid taking it in if I can (having one income and 4 kids can keep out extra cash, plus I want to learn). Pictures would be awesome if possible. Thanks! 
    • By Kanyon Pershing
      I have recently rebuilt my Yamaha warrior 350 engine and when I got it all back together with no “spare parts” i went to start it and realized it’s in reverse. I went to put it in drive and the shifter won’t budge, I took the linkage off and tried to use vise grips but it won’t budge at all. Any help would be greatly appreciated. I’m hoping it’s not something internal! 
    • By YamahaBB350
      I have a Yamaha Big Bear 350 and the reverse doesn’t work, it shifts from low to high easily but it won’t go back to reverse. I’m new to this stuff, so I’ll take any help. Any ideas? 
    • By Colin James Krepela
      So here's the deal people, I have an old Avenger 350 4X4 Shaft Driven ATV. They only made them in the early 80's their thought of as the first four wheelers from around back when Suzuki made one in 1982. I believe the engine on it is a Kohler as I watched this video https://www.bing.com/videos/search?q=avenger+400+atv&view=detail&mid=1E10E939019CA07770031E10E939019CA0777003&FORM=VIRE but mine is a 350. That's if its original, and it all looks original. I am wondering where I can get parts for this engine, or really what engine is it. I have no way to find the year, unless you guys know where a serial number might be. Every sticker is worn off. IF anyone has any information at all on these old wheelers it would be greatly appreciated. I specifically need the gaskets for the carb, and don't tell me I could build them please I want to restore it as perfectly as I can. I can take pictures of the wheeler/carb if it'll help. Let me know.
    • By oleskool
      Has new top end, piston, rings, valves, etc. great compression, good spark, plenty of fuel. Valves have been set. timing has been tripled checked. Can not get it to start. any ideas suggestions on anything I am missing. Also if anyone has the service manual it would be greatly appreciated.

      Thanks
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...