Leaderboard

If you are a new member, why not introduce yourself? This community thrives and grows with you and all our current members! We all want this community to grow and encourage new member registrations. That being said please help out QuadCRAZY by inviting other atv'ers to the community. QUADCRAZY NEEDS YOU!

I saw this article on Motosport and thought it was pretty good. Anyone add anything? You might think hopping on-board an ATV and going for a spin is just as easy as taking your regular 4-wheel car for a ride around the block. After all, both have four wheels. How hard could it be? In many respects, you're right. Some adventure riders choose quads over their two-wheeled counterparts of the dirt because there's less chance of crashing and it's easier to learn. ATVs also offer more manageability for younger riders to get acquainted with outdoor riding than a dirt bike. However, beginner riders on ATVs tend to make the same mistakes that result in crashes, roll overs and injury that could be avoided with some instruction and know-how. If you're looking at a fun family outing by renting ATVs or want to get into the sport take advantage of the following points and avoid the same mistakes so many other first time ATV riders make that end their day early or before they barely get started. 1. Nerf Bars Get Nerf bars. These are not soft cushy add-ons that are cousins to the football you use during backyard football games. In many respects, Nerf bars are gigantic foot pegs. Don't bother with traditional foot pegs because you'll constantly slip off and because of the "I feel safe factor" that comes with riding a quad you'll also have a tendency to let your feet drag when riding. That's a recipe for getting one or both of your feet caught in the back tire resulting in serious injury. Nerf bars allow you to stabilize your feet and get maximum control over the ATV Rest your feet easy on Nerf bars 2. Rolling Over Believe it or not, it's fairly easy to roll an ATV over. And you don't want to be on the bottom of that sandwich. The most common way of ending underneath a quad is looping out. That's done by hitting the gas and having little to no experience with the power of an ATV. The front spikes up like an out of control stallion, throws you onto your back like a bucking bronco and then pins you like a UFC Champ. The second way is when you're having a bit too much fun sliding around in mud or other slick conditions, the tires finally do what they're designed to do and grip the ground but the rest of the bike, with you on it, keeps going. Finally, those who think they've found their bearings take aim for a steep slope and try to conquer it only to end up upside down or in their attempt to arch alongside said steep hill, tumble over the side. 3. False Sense of Security This goes somewhat hand-in-hand with the roll over capability that many riders fail to appreciate therefore they also neglect wearing proper protective equipment. Don't think wearing jeans, t-shirt and sneakers is adequate protection when riding a 4-wheeled machine powered by a gas engine that doesn't have seatbelts. You need a helmet, goggles, gloves and riding boots at a minimum. Once you start ripping it on the track or trails add a chest protector, neck brace, knee brace, etc. 4. Throttle Control Everybody wants to skip the kiddie stage and get right into hair-raising speed when it comes to riding ATVs. OK, most everybody. But for those who do so many put on the cloak of invincibility and think a quad is merely a mini car that finally enables them to release all sorts of pent up childhood inhibitions. So they jab their thumb into the throttle with the expectation of a controlled roller coaster ride. Instead, they loop out and end up underneath the quad or manage to stay seated only to careen off course and introduce their 4x4 to a large tree. ATVs normally have a thumb throttle and most have an automatic clutch so the clutch is one less thing to worry about. So go slow and figure out how much "thumb" is too much and get used to the speed and power an ATV delivers before really going for a ride. Oh, one more thing, learn to take your thumb off the throttle! It's not to hard to loop out on an ATV 5. Loading the ATV Never, ever ride an ATV up a ramp into the back of a pick-up. If you want to know why just go to YouTube. If you want to know how to load an ATV check out this fine piece of quality information on How to Load a Motorcycle, Dirt Bike or ATV into a Truck. The bottom line to riding an ATV the first time is treat it like you would anything that comes with a modicum of danger. Careless behavior endangers you and others but with common sense and a willingness to learn you'll enjoy of lifetime of riding quads. For additional information on riding and/or maintaining ATVs see: 10 Quick Safety Tips for ATV Trail Riding Tips for New ATV Owners Choosing the Best ATV for Beginners 10 Things That Alter Your ATV Performance Written By: AndrewT

Hey, look, I'm new but a topic I know a lot about! I'm an ex ignition systems engineer, and I used to work as a test engineer at NGK here in the US. CDI is capacitive discharge ignition. This is a VERY complicated topic, but I seem to be pretty good at analogies. Quick background: an ignition coil is an inductive device, you apply voltage to one side of the coil, and you generate a magnetic field, when that field is collapsed very quickly, the secondary side of the coil will generate voltage that is proportional to the winding ratio on the primary and secondary (12volts in, 40,000volts out). Capacitance is created whenever you have two metal plates within close proximity of one another. For example, an ignition coil in the head (like in a coil on plug engine) creates capacitance because of the close proximity between the coil and the head. Capacitance can be added via special boxes or even some spark plugs (pulstar, if they are still around, but don't use them...) So, what does that mean for spark? Well, capacative discharge occurs very quickly over a very small amount of time (think nanoseconds), while inductive discharge occurs over a longer time, think microseconds. So, analogy time. Think of a coil as a gear reduction with a flywheel on it. The flywheel has a clutch that engages and disengages a water pump. When you apply a 12 RPM input to the gear reduction, you get 40,000RPM on the output, but it takes a while to spin up. So, when you start spinning the input and the flywheel is spinning, this is like the dwell time. Once the flywheel is spun up sufficiently, the clutch engages the water pump, and water starts to flow into a hose. At the end of the hose is a valve that will open at a certain pressure (this pressure changes, and is analogous to the required voltage to breakdown the spark gap). "There is some stretch in the hose, so when the valve opens there is a little bit more flow for a short time, once that's done, the pump keeps pumping until the flywheel runs down." The small stretch in the hose is like the capacitance of a standard ignition system. Once the valve is opened, the flywheel energy pumps out what it can, and then it's done. A CDI system is like adding a big pressure tank to the end of the hose. Once the pressure starts to build, more and more water is stored in the tank. Once the valve opens, a HUGE tremendous amount of water comes out, but for a very short time. Once the tank is done, the flywheel/pump still pumps a little bit out. So, the pressure tank is like capacitive discharge, and the flywheel pump is inductive discharge. So, what's the advantage? Well, the problem with a spark plug is something called quenching. When spark occurs, there is a very small flame kernel that is susceptible to quenching via nearby relatively cool metal, like the plug, the head, etc. Increasing ignitability reduces this quenching effect, which is actually the benefit of fine wire spark plugs. CDI helps this by providing a lot more energy in a very short time. Some CDI systems help even more by allowing more current on the primary side (hence the need for bigger wires). So anyway, that's what I can add, hopefully it helps.

What Ajmboy was referring to was the post. This website has a lot of technical resources available for the users of the site. Its a website and unlike social media, you don't get an instant response. Those who have the resources to share are only here on their spare time so a reply may be a day or two. Plus the way it was posted "I am just here to get a manual" is outright saying "once I get this manual, im gone" I wouldn't be too inclined to help that person either. Then on top of that to post 10 replies with only a number is childish, another reason to not help them either. A forum board is a community. There is already a lot of people who do come here to ask a question about a problem, then someone provides some suggestions to help solve it, and they never post back that it fixed the problem, so we never know if our suggestions worked. We assume it did, because otherwise they would post back that it didn't work. Mike

Heres my story. Kinda long. I guess I was a late bloomer when it comes to quads. I had never ridden a quad in my life. Rode Dirt Bikes as a kid growing up. Back in Oct of '06 I found a Mustang on craigslist. Took it for a test drive one morning before work. Fast car. 351 Cleveland. I had planned on meeting the guy again after work. For some strange reason thats still to this day beyond me, I stopped in Hillsboro MotoSports on the way home from work. I had 6 Grand on me. There was a left over '05 sitting by the front door. It was on sale for $4999. It was $5499 OTD. I didnt even look at anything else. I knew nothing about quads accept I thought it really looked coool and I had the money in my pocket to buy it. I was sitting on it when the salesman walked up and asked... "Can I help you?" Without hestitation I pulled 60 Ben Franklins outta my front pocket and said "I want this Quad. Load it up in my truck." It was just about dark by the time I drove away from the shop. BTW, I didnt bother to ask my ol lady if I could buy it. LOL. Anyway, I took it by the house and showed her. She was kinda stunned but not mad. We drove over to a friend of mines house and unloaded it. I took it to the field across the street from his house. HOLY CHIT!!!!! I was surprised by the power. I had it for about 2 weeks and took it to Sand Lake. I was there a few hours and rolled it on a banked turn at the top of the bowl right before you get to the one-ways. When it rolled, I flew off and landed on my belly. The quad came bouncing and landed on my back. For a month I couldnt even walk. I was scared of it. I considered trading it for a 250EX. Went back to the shop. The salesman said..."Dude!!! You dont want a 250EX!!! Trust me. Just get used to it" I still wasnt convinced. I put it on craigslist for $4000. Calls were coming in. I had a guy that wanted to come look at it that evening. I decided to take it for one last ride at Browns Camp before I sold it. I was still afraid of it. After about 5 minutes I started feeling comfortable on it again. I decided right then, I loved my Honda 450 and would learn how to ride it instead of selling it. That was late Nov of '06. Work was slow for a Painter in Oregon. My new job everyday? Going to Browns Camp and ridding my Quad. I bought my Girl Friend an '02 Blaster. I rode my 450 for 4-6 hours almost every single day for 3 months. And yes, I know my way around Browns Camp pretty well. LOL. In March I bought her an '06 TRX250EX (Thank God I didnt trade my 450 for one of those) LOL Since then, I have become totally addicted to quads. I love them. Couldnt imagine not owning at least one quad. Luckily I have two. My "07 was $6500 OTD in July of '07. Bought it for my Girlfriend. Traded in her 250 EX. A month later we broke up. So, I wound up with two Honda 450's.

Trump has done more good for America than all the previous presidents since Ronald Regan. The Democratic party is a complete disgrace and embarrassment to America....

Can't thank you guys enough for making all this possible! Gave Quadcrazy a shoutout in the video!

That’s because people like you come to get something free and offer nothing in return to the community that gave them something. Next time pay for a manual.

Definitely the mountains for me, getting to the top of a ridge or coming over a rise and seeing a huge open expanse of valleys, nothing better.

Picked up one of these this year to improve our riding and camping. Its a jumping jack trailer which can haul quads or other stuff on the deck, and then opens up into a nice sized tent. We have used it four times so far and really like it. There is even room inside to store gear with the tent down which really saves on packing. The model we have hauls two machines. but they have other larger ones and one size smaller. Mike

Gotta love Facebook Marketplace, and the crackheads that you can buy things from on there... Naturally, I'm like "Hook up the trailer, let's go get this pile of eBay parts!" and hauled as* to this dude's house with 3 crisp Benjamins to wave under his nose. Showed up about 20 minutes early to find him and his buddy hastily reassembling the pile of plastics into a semi-presentable quad, using some real sweet bulk bin galvanized hex bolts from Tractor Supply Racing Co. Looked it over and handed him the three bills in exchange for a transferrable registration from 11 years ago, and a STACK of handwritten bills of sale from the last 11 years, since apparently no one has gotten it functional (for long). Average ownership period ranges from 6 months to 2 years. Fingers crossed, lads! Got it home, and hit it with a healthy dose of bike wash and the pressure washer, more bike wash, a lot of scrubbing, and more pressure washing to get years worth of crud off of it. The entire left side of the crankcase was covered in an eighth inch of caked oil mud, as though there had been a catastrophic loss of oil at some point in the past, because it was nowhere near the drain or fill holes. Totally opposite side. Managed to find the VIN hiding in there and ran it for giggles. PO mentioned that he "had it running at the beginning of the season, but it was 'rough' " and that he had cleaned the carb, but it didn't help much. And now it just plain wouldn't fire at all. Kind of threw his hands up and shrugged. So, after cleaning it up enough to turn wrenches without looking like a Texas oilman, I took off the plastics and started poking around. Found a few fishy spots in the harness where previous attempts at repairs had been shoddily made and hidden with black tape. Sorted those out, drained and filled with fresh oil and a filter, and hooked up a battery. Turned the key, got a green light, hit the starter switch and got a little grunt and squeak out of it, then nada. No light, no nothing. Pulled out the DeOxIt D5 and started pulling apart all the connectors and giving them the business. put everything back together again, turned the key, got green light, and starter cranked! Then nothing again. Started fiddling with the wiring and connections while watching the green light, and saw a flicker when I bumped the 25A fuse holder. Gave it a squeeze, and sure enough, the light came on. Thing was full of powdered remains of spade terminals, so I installed a NOS replacement model from RADIO SHACK that had been swimming around in my toolbox for nigh a decade. Sure of my fix, I tried the starter again, and NOTHING again. More fiddling revealed that the OTHER fuse holder (15A) was the same. Homebrewed another fuse holder from spade connectors and shrink tubing, hooked it all up and everything was good. Now that I could crank it, I poured a couple cups of gas in the tank and pulled the plug to check for spark. Good blue spark, once I cleaned up the theretofore fouled plug and gapped it. Screwed it back in, with a healthy dose of ether, and gave it a crank. Not even a wheeze or a sputter. Off with the carb! So, I think our old friend PO has a drastically different definition of "carb cleaning" than I do. I'm thinking maybe he wiped down the OUTSIDE of the thing, and was shocked that it had little to no result. That white stuff is a combination of powdered aluminum oxide and near-varnish fuel. Has the consistency of slight dried mayonnaise or white library paste, but no pleasant wintergreen aroma to match. A quick perusal of the Amazon bargain bin turned up a carb (BST31SS) and non-vacuum petcock for $25, with a caveat that the carb required minor modifications to fit. Four days and a lot of sandblasting and surface prep on the plastics while I waited, the carb arrived today and I drilled out the ferrules for the choke and throttle cables to accept slip-fit cables instead of thread-ins. Other than that, the only difference was a lack of one vacuum port for the petcock, which I had anticipated and purchased a regular old one with no vac diaphragm in it. Safety first, amirite? Now with definite spark, and reliable fuel delivery, I started cranking and fiddling with the idle and air screws, managed to get it to fire up - almost literally~ There was a LOT of smoke coming from near the exhaust port on the head, thought I had loose header studs for a minute, then realized it was just more of the old oil mud I had missed while cleaning, burning off between the fins on the head and the exhaust heat shield. First fire up - lots of smoke While I was changing the oil, I took the opportunity to pull off the access covers and adjust the clutch and valve lash, so I was feeling OK about running it a little more. Got the idle and mixture set a bit better and decided to test out the transmission and shifting a little. Testing reverse Realized I left the parking brake set, so it stalled out. Oops. Another thing I did while waiting for Brown Suit Santa to bring my carb was to remove the diff lockout pin from the shifting mechanism and I wanted to see if it worked. Here's the quad, up on the lift, minus the LF wheel (due to a seized cylinder I've since replaced) with range set to HIGH, and Differential Lock engaged. Worked like a charm. Had to holler at the dog who was camped out below the rear tire Dog under the tire. Again. I think she has a death wish. Or perhaps aspirations of being a jackstand in the pro-leagues. Testing Diff Lock in High Range Put the wheel cylinder in, (Dorman w38750 for a 1991 Geo Metro/Suzuki Swift was a precise fit and only $10) to replace this crusty POS: put the wheel and hub back together, put seat back on and fired it up. Made sure it would start again after turning it off. Long Live The King All the repairs appear to have been successful all around! I took it out for a quick rip up the street and back, needs a little bigger main jet (it came with a 145 installed, which I swapped out for the 120 OEM spec, but it feels boggy at WOT, so I'm going to experiment a little after I get the airbox back together, but 145 seems like a big jump. I'll try to post an update once I have the plastics all refinished and installed next week. Pretty sure it's going to be yellow, no camo or green bullshit for me thanks Hope you didn't hate my post.

Facts and science keep changing and cannot even agree. So not a valid point.

Pretty sad when someone does not agree with your opinion you call them ignorant.

I have no idea, I definitely want no part of that. Obama has been on the campaign trail this week saying Trump inherited the economy, what a joke. Obama was the most non-business friendly President in decades. Good rid-ends! I cringe hearing him, speak. I used to have company sponsored healthcare with with no deductibles and a $25 copay. After Obamacare, it went to 30% coinsurance after the $3000 or so deductible is met for the same price. So now a few visits to the doctor costs $100-$125 per visit. Oh and BTW in 2020..no more "out of network". Company sponsored insurances went down after obamacare because rates went up to these companies. Did Obama think companies would just pay more? They need to remain profitable to stay in business and offer jobs, its a basic principle...lower corp tax, the more they can do. I get it, some were uninsured because they don't work for a company or business to get healthcare, but taking care of them really hurt the middle class that DOESN'T work for what I like to call a "tax-based" job, where tax revenue pays for their fed, state, or local gov job in a municipality, school district or other type of agency that still has good healthcare and pensions in most cases. All obamacare did is hurt the private sector. There are not enough "tax-based" jobs for all Americans, so you need big and small business, otherwise everyone is working for or relying on government in some shape or form, at which point you might as well say good buy to America as we know it. Obamacare essentially caused rates to go up on the middle class to take care of the lower class with medical...yeah that was just great. I'm for the harder and more you work, the more you get and not get punished. What's the pointy really, might as well find some government program and assistance to sit on and just coast through life with my hand out. The only thing I'm not happy about with Trump is that he has not been able to do anything around healthcare that is felt by people like me. We are stuck with this obamacare crap.

A few more pics from up above NYC.

A lot of "what ifs" to go with electric trucks and quads, especially if you're 200 miles in the bush. " Quad charges off the truck".... Great .. But how do you charge the truck if you're out on an extended stay ? Can both be reasonably charged using a small to medium 110 - 220v light plant of about 2 -3,000w ? To me , that quad is an ugly no go. 2wd and chain driven at that doesn't cut it in my book. Nope on the design on that "truck" too. I can see an electric 4x4 truck, but I would also like to see one with a built in gas powered genset to be able to recharge the batteries when way out in the boonies. It wouldn't need to be a fast charge , just one that could recharge it over a day with ability to restore at least 100 miles of its capacity in that time .

So I tried something a little different and had a editor edit my last video! I think it turned out great! let me know what you think in the comment section of the video on youtube! dont forget to like and subscribe!

I was able to get out for some tracking in-between storms ... we have lots of deep powder and on this ride, it was pretty windy ... of course, it usually is on these ridge tops. It was nice & cool too. The day started of at -7F (-21c) and stayed pretty nippy all day long. Hope you enjoy the video !!!

Its all set:

I uploaded the Yamaha service manual for your Big Bear. Covers 2000 & 2001. First time I've done this so I hope it downloads correctly.

Well Michael, thats not going to do anything but piss people off. lol, Just browse the forum and make a few comments, maybe start a post and introduce yourself, let us know what youre working on and how its going.

Agreed, sounds like your like me, old school. Been on fourm boards for years, but over the past few years social media has taken over and many have shut down for lack of use. I still prefer the fourm boards over social media because its organized better, with groups and topics. Social media tends to be like spaghetti of posts and nonsense. I have also seen how people have changed because of social media. They will post a question, then like 2 hours later, post a reply like "What? Nobody has an answer for me?" They don't get it how it works. They want the "instant gratification" of social media verses the fourm boards. Mike

Few bears doing water wheelies! I fell off the bike and boy is the water cold lol!

Here's a "heads up" for everyone searching for owners or service manuals for your quad. While searching for service manuals to help others posting in the forum, I've come across a couple of sites early in each search that claim to offer the service manual needed. When clicking the link for the manual pdf, it opens a download link showing an .exe file. DO NOT CLICK ON ANY DOWNLOAD LINK THAT SHOWS AN EXE FILE TO GET A PDF OF ANY MANUAL ! I am running Windows 10 Pro and it is set to show the full address and type of any file. It also prevents automatic downloads unless I specifically allow them. Those fake manual pdf downloads try to automatically install the file downloader it actually contains rather than a true pdf. Had it actually been able to run automatically, it would have downloaded a load of hurt on my PC. The downloader link was able to install into the temp folder in my Windows but was not able to execute because I did not click to allow it . Afterwards, my A/V program detected the malware in the temp folder and quarantined it for removal. Had my PC not been set to show the complete address and type of file and to not automatically download files I'd have one very compromised computer. Everyone , make sure your anti-virus program is kept up to date with the latest definitions for it. Set your computer to show the complete address and type of file rather than allowing it to auto - hide known Windows file types so a program such as xxx.pdf.exe shows as such and not as just xxx.pdf with the known file type .exe hidden.

Anywhere I can !! relaxation !!

I like to ride in my hometown. It is a small city so i like to travel there with my bike. I prefer to ride slowly because it gives me amazing feelings.

I have front and rear hard storage, so I stock it with some extra water, extra Gal of gas, Winch accessory kit w/ tow and recovery strap, a 1st Aid kit, and compressor.

"Just one more..." is the little white lie that keeps on giving.

Its been interesting, not something I had planned on fixing, got it really cheap I needed the tires for my eiger, but after looking it over I liked it, so decided to try and revive it. Like the old saying, if you are not having fun, you are doing it wrong. I found this site shortly after and it really helps keep you motivated, a lot of good friendly people willing to help.

Had the privilege to get out both days this weekend, weather was fantastic. Was able to take my oldest brother out to an area he hadn't been to yet, and was thankful that we got to spend that time together just the two of us. I did ask some others to go but they were unable to make it so it ended up making a special day for us. His health is not the greatest so will definitely treasure the time and memories of this outing. Was also able to finally link up with my neighbor and some friends of theirs and take them on one of our favorite trails today. They seem to be gone most weekends over the summer so has been tough to connect over the past 4 years since they bought their Razors. They seem to stick pretty close and go riding and camping together most weekends. With fall setting in and it dipping into the high 20's and low low 30's at night, our camping season is coming to a close. Still in the 50's - 70's during the day but pretty chilly at night. They had a free weekend so we were finally able to take advantage and get out. Today confirmed for me, once again, why we haven't moved to the sidexside realm yet. We were going to ride on one trail, and even though they have 50" machines. The trailheads have huge rocks, posts, or arched cattle guard type gated areas that are exactly 50" apart. This keeps the larger sized SxS's, jeeps and other 4 wheel drive vehicles off the trails and from getting torn to shreds. My wife and I drove our ATV'S through and friends attempted to do the same. Even though the posts were 50" apart and perfectly plumb, the ground was sloped side to side causing the fenders and door area to lean too far to the side and would have scratched the entire side of the machine as he drove through. He couldn't even get the front fender flair through with out it getting scraped and gouged by the wire of the fence wrapped around the posts. So had to change plans and go different route. Still ended up being a terrific day and they had a great time riding in a new area. No SxS for us in the near future!!! Here's some pics from both days

Hey Akunin, been a while. Sorry we werent able to link up last November when we were down in Rapid. Wasn't much of a pleasure trip. We had to go down and move the inlaws out of their house, was not a pleasant ordeal. Went from 5500 sq. ft to about 950. Spent 8 days there getting things packed up, a few home repairs, a little plumbing. Hadn't a minute to ourselves, we were ready to get home that's for sure. Saw you bumped this thread I'll add a bit to it. We took our first ride of 2021, it ended up being the same place as last year, took a bit of a different route but went out about 2 1/2 weeks ago officially making it the earliest we have ever been out. It was a great day, was about 32 degrees when we started but warmed to about 70 as a high. Was an interesting ride, I didnt expect as much snow as we ran into. Some of the trails we went on were labeled Black diamond, have been on them before but being's they are nestled in the trees, many were solid ice making the decent on some of them way more technical than what I'm normally used to. Planning how to maneuver a turn when corners are sharp and dry is one thing, planning how your going slide around it without flying off the edges is another. Made for an exciting but tiring day. My Maxxis Bighorn 2.0 tires performed flawlessly. Since I was the designated leader I also doubled as the Guinea pig, made several walking trips back up the hill to guide others down and to ride my wife's machine down through several tricky areas. Was some of the best riding I've had to date, just had to think clearly and be careful. We stopped at a spot called "The Lunchroom" an area between these big slabs of rock with a couple of rudimentary tables to eat lunch. Am growing more fond of this area each time we ride it. Rode from about 9 until 4:30, with the slippery trails that was plenty. Got home about 5:30 spent 4 1/2 hours cleaning up the machines. Looking forward to the next ride.

Hey guys been member for awhile and love this group ,kind of lost contact with social media ,i have been so busy working my property and just Racing the calender while winter is creeping in , i even slacked off Fly fishing this season , As we know winter sets in and time becomes available lol, i have plenty of silly “ Quad stories to share as well as just missing the guys here great group , looking forward to winter break and tying some flys lol.

I use polaris ride command. It lets you map and gives elevation. Waypoints and on the upgraded version it gives you who owns the property your on or looking at. I think that’s on huntstand too. Not positive tho. It works on mobil phones and without service. It’s pretty neat. Sent from my iPhone using Tapatalk

That is an atv!

Just remember who gutted the CDC and other health departments of the funds necessary to fight unforeseen outbreaks of pandemics. Then when COVID-19 broke out pooh poohed the severity of it and the need to prepare to fight it .. Now in his rallies tries to put blame on Dems and somehow the previous administration for the US being so far behind others in ramping up the fight. When you vote this December, remember all the lies, all the attempts to take credit for what others have done, all the changes in his cabinet and elsewhere because competent people woyldn't toadie up to him and the incompetent proved to be too incompetent and he was losing a bit of support because people were starting to clue in . I lay some of the blame for some of the pandemic deaths directly at Trump's feet and his refusal to face facts, take advice he didn't like and put in motion and fund the health system adequately to start fighting the developing pandemic because they'd make him look bad. There's you rant from a Canadian who's government set in motion the funds and people to attempt to limit the pandemic as much as possible and care for the ones affected by it . Stay away from the crowds. . Enjoy the wheeling. There's no chance of COVID catching you out in the fresh air away from the panicking crowds. What the hell does a room full of toilet paper and boxes of hand sanitizer have to do with keeping safe from the virus , or treating it if you're unfortunate enogh to catch it ?.. Take the advice of the pros .. Wash your hands and keep your distance. Much more effective than the idiocy going on now . St least that panic buying of as* wipe and sanitizer isn't limited to the US.. The crazies are world wide in that that respect.

Ok so new flywheel is in and she fired right up. Huge difference, i can get to just about 80% throttle without any backfiring. The carburetor is still in need of tweaking but i think the problem is solved. Unreal that something like this can happen. What baffles me the most is the magnets on the old flywheel are solidly in place but yet they are incorrectly placed??? I tried to pry them off the flywheel with no luck. So strange! Going to get after the carburetor tomorrow and take it for a spin before i put it all back together. Keep ya posted.....

Think I got it Frank! Used my lawnmower battery and it started right up. I think I'm gonna get a new relay because its hit or miss with it it seems. Thanks for all your help, I greatly appreciate it!

Very nice! Looks like some nice options for hunting. I was doing the same thing this weekend at my cabin. Collected the cards from 6 cameras that have been out for 2 weeks. Here's a little bit of what I captured. Near as I can tell I've got 4-5 different bucks to choose from. Also had does (can't shoot them this year), a coyote, raccoons, rabbits, and a grouse on various pics.

That's pieces of an ancient rubber glove..... don't know man. Just messing with Amjboy. We need those crusty guys around. We'd call them "Old Salts" in the service. Thanks.

I received this set this week and used them. Could not be happier. You strip the wires put them into the connector and hit them with some heat. The tube shrinks and has a gasket material that melts and surrounds the wires, then there is a strip of soft solder that melts as well connecting the wires. Very strong. 👍🏻 50 pcs Solder Seal Heat Shrink Butt Connectors Electrical Marine Automotive Waterproof Wire Splice Insulated Connector Kit 26 24 22 20 18 16 14 12 10 Gauge AWG https://www.amazon.com/dp/B01LK2YJQC/ref=cm_sw_r_cp_api_i_RZ-GCb3N1M9Q1

Here's a little update on the wife. She's home & the best part, she is in NO PAIN !!! The leg is getting stronger everyday. Looking forward to the day she can walk again without crutches. The scary part about her getting better is, she keeps saying she can't wait to be able to drive again & go shopping !!! .......... 🤔😧😩 ... That is NOT a good sign ...... 😄 ...

Alrighty ... so someone said I know Tracks ... Funny thou, they never said I know Jack before ... and I still don't know Jack .... But I think I know enough about tracks to answer your questions Gilroy Guy ... First ... if your friend was stuck out on the lake in snow & slush with his 500lb sled ... with a tracked ATV, which with the snow & ice on it, will weight about 1000 to 1400 lbs (And I SH*T you not about those numbers) ... I'm afraid you would be too. And Yes, they are a SOB to get unstuck. Sorta ... I've never been in snow & slush, but from what I've read & talked to some Canadian friends about it, it's NOT something I want to try. Getting stuck in just snow ... and you will ... isn't to bad, if you just take it as part of the adventure & take your time digging yourself out. See, usually when a tracked ATV gets stuck, like tires, it's because the belly of your ATV is resting on snow & the tracks don't have anything to grab a hold of ... Yeah, you're high centered. So, armed with a good snowmobile snow shovel, you have to dig down around the ATV so you can dig the snow out from underneath the ATV. And maybe dig a ramp affair in front of the ATV & usually, you can drive right out. That has worked for me for 10 yrs, so .... and a winch is worthless unless you have something to attached it to. And even then, you'll have to dig because the winch won't be able to get out out of the hole you're in & back on top of the snow. So, to answer your questions ........ 1) Buy whichever one you like best. I've had a Can-Am since 2011 & I've ridden with a friend with a Polaris with tracks. Personally, you couldn't give me a Polaris. But you asked. 2) All Season vs Winter Tracks. I've had both and after the first season of using my 4 season tracks, I ended up using them for snow only. Tracks ride real dang rough on dirt. They throw mud every where. But the 4 season tracks can ridden on asphalt for miles if a guy needed to without hurting the tracks. Snow only tracks are just that ... Snow only. Think "Snowmobile" ... Snow Only. It takes a bit of time to change out tires to tracks & back. But I use the time to do all my service work. Change oils, grease things up, inspect everything, check the belt, etc. They say you can do the change over in a couple hours. I'd say 4 hrs not killing yourself. What takes most the time is putting the mounting brackets for the tracks on. The tracks themselves mount up just like tires with 4 lug nuts.I usually take a couple days cause I also take the skid plates off & really clean the bike up. And with my back etc, I see no reason to hurry. Are snow only tracks worth it compared to 4 season tracks ?? ...... That's a tough one. For me personally, where we get between 4 to 8 ft of snow ... YES. HOWEVER, I used my 4 season tracks for 9 yrs in those same conditions & did just fine. (I did get stuck more often thou) But these new Can-Am Apache Backcountry Tracks are AMAZING !!! Pricey, but Amazing ... And I wouldn't go back to a 4 season track ... but that's me & where I ride. Your third bullet point asking about tracks and long trail rides in the summer .... You could I guess, but the tracks are going to beat the crap of you. Tracks have no give like a tire. They ride damn rough on dirt. AND, a tracked up ATV will NOT go as fast a one on tires. Track drive sprockets are between 14 & 16 inches in diameter. Your ATV tires are 24, 25, 26, or larger. So with tracks, you are geared down a lot. The fastest I've ever done on tracks (& that is my new ones with 16 inch drive sprockets) is 42 mph. But let me tell you, you will have your motor rpms maxed out. I usually run 18 to 25 mph on hard pack snow. Yes, I can go faster, but I don't. And speaking of being geared down, with tracks you will use lots more fuel. About twice as much. My Can-Am 1000 has a 5 gal fuel tank. On tires, I've ridden 82 miles on a tank before I refueled. On tracks, both on hard pack & powder snow, & remember, you'll be in 4WD the entire time, I've done 33 miles before I had to refuel. How long are tracks good for ?? I've got a set that are 9 yrs old & they look brand new. Remember thou, I've used them mostly for snow only. The hub bearings & bogie wheel bearings are where you have to pay attention. I used to change ALL my bearings out every 2 or 3 yrs. Something like, 56 bearings I think. Yes, I bought cheap Chinese bearings & greased then up good. My new tracks I'm hoping will be better. On the plus side, if I have to change the bearings out, there are only 22 not counting the 4 additional bogie wheels I added to the rear tracks, which would be 8 more bearings. Warranty issues with tracks ?? Depends on your dealer I guess. I do ALL my own work on my machines & have the dealer check & verify I did good. But I'm on REAL good terms with my dealer, so .... Issues with stock axles, clutches or other components ?? Not in my experience. But anyone can break anything given enough time, throttle or alcohol. I started with a 2003 660 Grizzly. I was told that was the worse year fo Grizzly there was for breaking axles. I ran tracks on that machine for 4 yrs & never broke an axle. Actually, the only issue I've had with tracks over 11 yrs is one CV boot. I tore a hole in one doing some spring track'in on my 4 season tracks. But, I've also put holes in CV boots while riding on tires, so ........... Stock clutches should work fine. And I've never had to change a wheel bearing or a tie rod. Some guys I guess have had issues with those components, but I haven't ... ever. Hope that info gives you the answers you're after ....... PRAY FOR SNOW !!!! ...

I think you pulled the wrong black wire. Find the reverse limiter and follow that black wire and disconnect. Here's what you're looking for.

I think everyone has their own valid opinion of which is the best brand. I like my Honda , and friends who have them also swear by them . Yamaha , Kawasaki and Suzuki also have their fans. Kymco, although much less well known also has a very good reputation among those that can get over their prejudices against "Chinese junk" . Kymco is Taiwanese, makes parts for a few high end car makers and as well as for some of the more name brand Japanese ATV builders. I can't speak for the reliability of some of the newer models of US/ Canadian ATV builders, but some of the older ones did not have a great reputation here . For example , among the riders I know the old Polarises were better known by the name " Pullhairis" for the troubles they had . I think the best ATV is the one that does the job for you, is liked by your riding circle of friends and is the one you can afford. Keep the maintenance up and any of todays machines will serve you well, although I too am wary of unknown brands that sell cheaply. None of the name brand , domestic or foreign should let you down whether the machine is 40 years old or new .. Maintenance means much ore than age .

Don't forget the simplest things first. 1997 Fourtrax300FW was running fine, stopped it to split some firewood, wouldn't start back up, plenty of fuel. I pulled the sparkplug, zero spark. I read a couple forums which made it sound like the most common problem for no spark was the CDI. From a YouTube video, I followed the instructions and used the multi meter Ohm meter to check the resistance on the two coil leads and the reading was about 0.8 as expected for a good coil. Ordered a CDI, replaced it, still no spark, but when I was checking it I noticed I was getting a shock holding onto the plug wire. Used a multi meter to check the spark plug (from instructions on YouTube videos) and there was no continuity on the spark plug. Replaced the spark plug, turned the engine over with the plug grounded to the cylinder head, visible spark. Then reinserted the plug, and it started right up. The moral of the story, if you don't have a spark, you may want to check the plug, or replace it first. That was the cheapest option, and it would have saved me the time of pulling the front cargo carrier and plastic off to get to the CDI, and order and pay for the CDI. I hope this helps someone else down the line.

Your revs going up and no drive power to the wheels was because your CVT transmission belt and clutches got wet. It doesn't take a lot of water entering the housing and wetting the belt to make it slip . CVT transmissions drive on the sides of the drive belt .. Since the clutches are smooth, they lose grip on the belt when wet ..As soon as the clutches and belt start drying they regain their grip. A worn belt will slip much quicker than a new one since it is narrower due to the wear on the sides as it is used. Definitely check all the fluids for water that may have entered through the various vents on the differentials, transmission and motor.

Morganne is already into the quad scene. She is a full on action sports fan.

This is what hauls our Quads now. Wow! We love this thing, This is not just an F-250 over here. I can do 100kph seat 5 in cumfort and It only uses 680kms per 110lts (422mile per 29gallons)