Quantcast
Jump to content


KJINTF

Members
  • Posts

    14
  • Joined

  • Last visited

  • Days Won

    1

Posts posted by KJINTF

  1. Might be a valve adjustment - don't believe its ever been done - Will try a compression and leak down test this afternoon

    Always used fresh gas with NO alcohol - only thing is that it's 91 only way to get no alcohol around these parts 

    Will also take a close look at the carb

    Anyone know what the KV of the spark should be?  I have a Pico Scope with the pressure transducer for so can easily see the compression, spark amplitude, dwell, etc..  

    Strange this starting issue happened almost overnight about a week ago - Guess it's time to get my hands dirty 

  2. Been slow in starting up, in the recent past it would start up in <1/2 second of the button press with a snap. Now it takes several seconds of cranking to get going. Once going runs as it always did. Replaced the plug no change. battery is good.

    Before I tear it apart and look things over was hoping others might have had the same experience and have a quick fix for me

    Thanks in advance for any and all suggestions to get this old machine starting quickly again as it has for 20 years.  

  3. Need some guidance 

    It's time for the engine 20 hour break in oil / filter replacement

    Of course Yamaha recommends their Yamalube for my Quad - No way to source it locally - Amazon sure but am wondering if i is really needed 

    Not very familiar with the Yamaha wet clutch lubrication requirements - would appreciate  some education 

    My 20year old  Honda with a manual tranny / auto clutch has been using Pennzoil Platinum Synthetic for 15 or more years with no issues     

    Can I use standard Castrol 10-30w dino oil? in the Yamaha

    How about Pennzoil Platinum 5-30w Synthetic?  in the Yamaha 

     

    Thanks for the help

  4. Update

    Reading through the Yamaha Shop Manual for my 2018 Kodiak ATV I find there are two separate diagnostic systems 

    YDIS > Yamaha Diagnostic Interface Software > Used for Marine products - Used it and it works good 

    YDT > Yamaha Diagnostic Tool > used for ATV's and Motorcycles - This is the one I have been asking about

    Again anyone here have this part # 90890-03257 or use it on your ATV? 

  5. You say

    "when I hooked up the leads, I heard a slight crackle/pop when I hooked up the battery terminal leads and there was a slight electrical smell. i thought it was just the crackle you get when getting a good connection to the terminals. i tested the pump, it worked and proceeded to start the atv. "

    Just guessing was the pump turned on when you connected it? If turned off there should not have been and issue - something close get shorted?

    Suggest you download the Shop Manual and check out the wiring diagram

     

    • Like 1
  6. The system is Yamaha's factory scan tool - still wondering if it works with the Kodiak and or Grizzly ATV's 

    The software runs on a windows PC with a USB interface and connects to the Outboard or Waverunner with a proprietary 3 pin interface through a protocol adapter

    It's good for diagnostic trouble shooting as well as actuator activation (IAC Valve etc..) kind of like a high end Snap on scan tool

×
×
  • Create New...