Rick Shropshire

On 2/3/2023 at 2:19 AM, Fish0rDie said:

Well, when i got my cart it didnt even have an air filter or box, so i suppose a clamp on will do it for me, and still be a hell of a lot better than nothing lol

Agreed

I’m looking at replacing rear brake calipers on both of my blasters. I was told that the only thing available was a hydraulic upgrade? I’d prefer the original. Anyone?

I recently picked up a  2000 warrior 350 and it doesn’t have the air filter box so I was thinking about using a clamp on filter directly on the carb.  Anyone know what I need to get or where I can find it? The one I ordered goes in the box and won’t fit directly on the carb.

Here's some pics from within the last month. Rather than build a frame and body from scratch, I drove to Kansas and bought a rust bucket G2 for $40 minus batteries. I've since cut it up in prep for the 1100cc v-twin shaft drive engine. I've included a picture of the of the latest mock-up. Im extending the frame and wheel base 12 more inches and widening the body by 12 more inches as well. I have on order a right side axle shaft and housing for the left side of my ATV rear end. This will widen the axle by about 12 inches. I will be eliminating the front  a-arms and replacing with straight pipe from knuckle to knuckle. I'll post more as it progresses.

What a mess, but it looks like I only need to replace the connecting rod bearing ($29) and gasket set ($30). The hard part is gonna be putting that crank back together and getting it perfectly straight. Ill have less than $200 into this bike if this all goes well. So, i guess im not gonna be cutting it up for golf cart parts after all. 

No worries. Hit me up if you have trouble finding parts and I'll help you search

they ran it out of oil and the connecting rod bearing has seized the rod to the crank. i gotta  separate the crank halves to see how bad it is. im googling  now to see if i can get those parts and what its gonna cost. other than that, this motor is clean inside and in great condition. id like to fix it and put the bike back together, otherwise it becomes a donor in a homemade monster golf cart of a sort. lol

https://www.alibaba.com/ & https://www.aliexpress.com 

@orvilleortiz538 these are chinese sites you can order from (I think you gotta create account,...brain injury so I cant remember for sure) and they have parts, you just gotta find them. i order all kinds of  things from them and get them super cheap, you just gotta wait about a month for them to get here, usually unless you pay for faster shipping

looks like 124cm3 is the 125cc engine. im gonna keep looking for ya and see what i can find

do you know what cc those motors are? Im googling and looking for something that looks like what i see in your pic

@orvilleortiz538 hard to tell what all you have to work with, without being there to check it out  myself but there are places to get the parts you need for those things. I had to order parts for a scooter a while back, you just gotta know exactly what you have to get what you need. I got welders and stuff, so i'd probably do mods if was too much of a pain in the as*. Im turning a honda shadow 1100cc bike into a trike 1st, then Im building a front end for it and a longer frame. Eventually itll be a mid engine 2 seater side by side called Frankie. I just like to create monsters! 

Search google and go to images and see if you can find one that looks like yours, go to the web site and see what info you can dig up. Good luck man!!

im trying to not get hospitalized, i got my  new/used multi-process welder fixed up and all put together, got steel, and I want to start doing the mods on the honda shadow so I can get that  atv axle mounted.  That bike is one heavy beast to move around without wheels on it. hahaha.  aand I need the space to put the lift and bigger wheels on my g1 golf cart and the beast honda shadow is in the way! I like those "dont run, been sitting in the shed" deals. Thats how I got my G1 golf cart. A clip popped off one of the linkages and the linkage popped loose from the carb. I fixed that and had to find roller wheels. It runs great, just looks rough at the moment. Itll look tough when I get done with it. Pics for sure when I can.

I've been out of commission with health issues, but I was able to take the motor out of my 220 and broke most of it down. They ran it out of oil and the bearing in the connecting rod to crank siezed. I gotta see if I can find new parts. Not sure the extent of the damage yet though. I haven't got the crank out yet. I was also surprised how good condition everything is except for the siezed bearing. I'm hoping I can afford to fix it but if not I'm gonna convert it to a side by side home-made golf cart and find another shaft drive water-cooled 500cc or so. That's a really sweet looking 220 you got Frank. Your kid is gonna love it!

Well Michael, thats not going to do anything but piss people off. lol, Just browse the forum and make a few comments, maybe start a post and introduce yourself, let us know what youre working on and how its going.

Im new also, have a safe and Happy New Year!!

Happy New Year all! Remember not to operate any vehicles while under the influence, you could get busted or worse, you could get hurt or hurt someone else who's playing it safe and end up in jail. Have fun and be safe.

yeah thats an abandoned honda shadow watercooled vtwin 1100cc with shaft drive a friend gave me. I recently bought as shaft drive axle out of an atv., maybe a bayou 400? Thats why I need several books! lol. Im gonna be building a frame for the honda and eventually turn it into a 2 seater monster cart and was thinking about jeep body replica I can make for it later. I bought the bayou 220 for a parts bike but I was only shopping for that size in used wheels and tires for my golf cart upgrades. I just got lucky. Turns out I can use that whole bike to build another cart if its not an easy fix with that motor. I am torn between keeping it as a bike and chopping it up. lolI do plan to post updates. stay tuned...

that makes sense, Im gonna crack it open today and have a look. Thanks

see? no warnings either

also says no restrictions, but yet there is

i wasnt counting, i may or may not have, how could I possibly have known I needed to keep count when you didnt mention anything about limits. Bottom line is, you didnt have it listed  anywhere and I am not a mind reader. I may have tried to dl 5 or 6, 7 or 8?? You seem to be able to look up my activity so, tell me how many I tried to dl? Dude, I thought this was gonna be a cool place to socialize and what not, but its starting to appear much different to me. How long am I now restricted and are there anymore secrets I should know about? I sure hope we can resolve this.

i follow rules, but i see nothing about limits here, nor did i get any warnings of any kind

You can do whatever you want to, its your site, but its bullshit that you're imposing a punishment on me for rules you don't even have posted.

Well I didnt know there was a limit, and I have a  project that is a frankenstein (it contains parts from several makers) so I did try to look into a few. I just wanted to look, but thats apparently not an option. I have not been able to download 1 thing from this site. If there are limits, you should mention that where you mention needing 10 posts to download, and I should still be able to download something today. 

lol thanks, it looks great from far away, but not up close

thanks, ill post an update when i know