Wali

The secondary clutch spins when its in neutral, but when put into gear it stops... 

Doesnt roll in gear, rolls in neutral. Brakes are not seized.... Brand new belt

i have a 2003 can an outlandee 330 4x4...

it wont move when i shift it into gear (H/L/R).... the secondary clutch spins in neutral, put once engaged into gear, the clutch stops spinning and wont go.

any ideas what to check?

I was riding my 400ex one day and when i shut it off to put it in the garage i tried to start it put again to drive it into the garge and it wouldnt start.I put a compression tester on it and its like 30 psi with out throttle and 0 psi WITH THROTTLE.

when i put my finger over the hole it fell likes its pulling my finger in more then its pushing it out 

Has good spark.When i took it into the shop the said it had 1oz of oil in it and a tiny pit of metal shaving(TINY BIT LIKE 30 flakes)

When i try to pull start (push start/roll start) it made a not normal sound  and wouldnt stay running.

If my bottom end is blow why would it still turn over fine,

Are my valves siezed or not working properly 

or is my timing off causeing valves to not open in correct order with fire 

PLEASE HELP all help is appreciated