swampcat07

I am going to do new rings and maybe a new high compression piston. I want to get a highlifter secondary spring and also suspension springs from them. Also I have big plans for the carb but I am not sure I want to share at this point.

I just posted a blog about all the mods and maintainance I have already completed.

What I ride, Arctic Cat and Teryx Mods » QUADCRAZY ATV Community

I will have to find out what motor you have in ther before I can recomend anything. Look like from viewing your garage you have a few things done.

Intresting, post pics when you get them. I have an '08.

Thanks Scott, So far it sits with about 15" of Ground Clearance. Working on some engine mods next.

Oh sure, now you tell me...:bangheadc:

I use the Altec Lansing Orbit-MP3 Portable Audio System its a small speaker that plugs into your MP3 Player. I have them on the terxy, I only use it when stopped otherwise you can't hear it.

Glad to see you posted Dave, just remember to keep the wheels on the ground with all that snot....

For the Fuses in the Newer Cats:

Replace the fan fuse with a Circuit Breaker. (Bussmann BUS CB21215 Type II or BUS CB21115 Type I)

Replace the main fuse with a Circuit Breaker (Bussmann BUS CB21130 Type I, )

I used the Type Is

The secondary mod is very noticable, so much so that I almost never use low or my brakes anymore. The only negative thing is that you ride with the rpms higher. Cheap mod and you can always reverse it. The circuit breaker mod is to replace critical fuses with circuit breakers. I did the main and the fan. This way if you blow a fuse all you have to do is shut the atv off and then turn it back on. So if your stuck on a hill you do not even have to get off.

Thanks guys. Below are the mods on the cat. As for the Teryx I love it. I bought a first year model when it became a leftover so no Fuel Injection but besides that no complaints. It flies down the trails and the suspension/ride can't be compared to the Cat. I love the wide stance and long wheelbase.

2007 Arctic Cat 650 H1 Mods

27" Mud Lite XTR on 12" LE Rims

29.5 Outlaws on 12" LE Rims

Secondary Mod

EBC Brakes and Rotors

All Balls Axel Bearings

2" Snorkel

Black Magic Exhaust

PIAA Driving Lights

LED Taillight Bulb

Auto meter Volt and Temp Gauge

Circuit Breaker Mod

One Way Check Valve on Carb. Overflow

PVC Valves on Duckbills

Fuel Filter

Add a three position switch, on, off, and auto. Some put a warning light for the off position. Then you can use the on position until you get everything fixed, the off for water crossings, and the auto for when you are back up and running. If you need schematics let me know and I will see what I can do.

Hey everyone, I just wanted to say a few things about me and that I plan on hanging out around here a bit more. Myspace and Facebook are starting to drive me crazy.

My name is Rob and I ride in NEPA. My name is the same on all other forums.

My goal is to ride once a week, even if it is just to the local spot.

I love to tinker with my Arctic Cat, so if you have questions hit me up.

I also drive a Kawi Teryx when the Cat is either broken or being worked on.

Anything else just ask.

Parks in PA range from $200 to $400 for a family pass for the year. State trails are free but have little miles. Looks like you are getting a good deal compated to here.