Search the Community
Showing results for tags ' 2wd'.
-
I need to know what I have and what tire really go on it, Mine has 24x11x10 on the back and 22x8x10 on the front and I need new tire but I don't think are the right size. Also I can't find the model number listed but it looks like a 250 quadrunner 2wd and I think it is a 1987 maybe, can anyone help me, also I it has a rich running sound and I put a carb diap in it and cleaned the carb. is there a jet needing replaced?
-
I recently bought this quad. When I shift into gear it wants to take off on me or stall if I hold the brake. I can get it moving if I use the shifter like a clutch and let it down easy. I have manual and adjusted clutch but it seems to be all or nothing meaning it won't go at all. What is my next move? New clutch? Any ideas?
-
hey there guys new here but have a problem with fourwheeler. been working on it for the last month. cleaned carbs changed plugs got it to start and now it will move just very slow no get up and go what so ever. was wonder if anyone could help me out.
-
My ATV only starts when in full choke even after I let it warm up and ride around I try to lower the choke but will end up stalling. I just put seafoam in the gas tank and will try that out first in about 15 min. I'm just worried that when it gets cold I'll have issues. Also, when I try to lower the choke after being warmed up I hear no difference in the idle. Is there a way to adjust this? Side question, when I do stall and im in gear its hard to go back into neutral to start it up again. I tried rocking back and forth but that didnt work. After 3 min it went into neutral smoothly.
-
Just pick this up today, every thing working and runs great. My question is the rear end. I checked the oil level and found none. What I did see looks like dried grease. How do I clean this and what do I put into the rear end, grease or oil? Can some one tell me where is the oil filter on my TRX300? Also looking for Service manual for my model.
-
I recently replaced the rear shoes on the rear brakes, and it seems that I can't get them adjusted. It's just like when they went out, adjust them to the max. I put in the new springs etc but have to crank the adjusters on the rear axel all the way in and it's still not enough. Is there something I am missing? Any help would be great! Thanks
-
Hi All, I have a 250 quadrunner 2wd and the title says 1990 and the vin number checks out right but I got it used and have had it for several years. I'm having fits with the carburator and have the factory service manual but the carb pictured in the book is different from mine and i can't even find a similar model on ebay or anywhere. I bought a kit for it and the float needle is different and that is the main problem I'm having. I can get it started and idling fine then the next day it won't hardly start. It's about to drive me crazy
-
Was wondering if there was a rear end that was interchangeable with this ATV. I heard somewhere that the 350 foreman was, could anyone verify this for me.