Search the Community
Showing results for tags ' exhaust'.
-
I I bought a Honda 250sx 1986 but the exhaust is broken. Apparently it's not possible to order a new one. I checked to order one on others compagny but there's noting. Do you know which exhaust it's possible to install. Is there a company who sold an exaust to fit on my 250sx. Sorry for my english Thank you Marc
-
Does Honda make an exhaust shield for the operator. My 2004 foremans exhaust manifold gets my leg hot. My 2011 rubicon has this shield.
-
I was out the other night for a few minutes and noticed the exhaust close to the motor was bright red. I searched the internet and saw suggestions that it may be running lean. Could this be it? How do I correct this?
-
[ame] [/ame]
-
- comparison
- exhaust
-
(and 2 more)
Tagged with:
-
I got my first quad two days ago, a 93 Yamaha blaster 250. The day after I bought it, a buddy and I were taking it around his grandmas yard in the foot deep snow. After letting it warm up (8 degrees outside) we rode it around for about an hour, stalled a few times due to its our first time riding a manual quad. I went into a snow bank and the quad stalled, I went to kickstart it but it wouldn't tun over, so we moved it to level ground and tried again. No luck, after about 10 minutes of trying to kick it over on and off, it made a weird sound out of the tailpipe, kind of a "pooft" sound, kind of like a small backfire. We looked around the interwebs and assumed it was the packing. Went down to our local yamaha dealer and bought some FMF exhaust packing. (the exhaust that is on the quad now is a DG) We repacked the muffler and reattached it. Went to to kick it over and still the same sound but a little louder. I contacted the guy i bought it off of (a mechanic who Ive known for years and trust) and explained what happened. He said it sounded flooded and to let it sit overnight. I did as he said and tried it again a little bit ago and still the same sound. It sounded like it was going to turn over after about 10 kicks but no luck. I kept the gas off for the first 15 or so kicks to try and burn out the fuel. I have no idea what the problem could be (maybe wrong exhaust packing?) so any input is very welcome!!
-
I recently aquired a king quad 700. I have changed oil spark plugs and air filter. My question is what could be the cause for oil to be burnt through exhaust? Smoke is blue in color and smells of oil. Bike runs good no loss of power just blows a good bit of smoke after reaching operating temps. Didn't smoke until reaching temperature. Thanks for any input you may have.
-
Hi all just been looking to upgrade my exhaust pipe and it seems I am very limited as to what there is that is a direct fit onto a 2006 wolverine. My question is will the exhaust slip on pipes for the 400/450 kodiak and 450 grizzly bolt up directly? Have it narrowed down to a big gun evo or a mbr 6000 from a local dealer but they are all listed for the kodiak and grizzly not the wolverine. Looks as though a big gun may be what I want for performance and sound but the price is $445 compared to the $235 Mbr. Does anyone have any input on this subject?
-
Would installing a stock exhaust of a bigger atv in place of a stock exhaust of a small atv be a practical substitution to an after market exhaust? For example would i see any performance gains ( or losses) if i installed a stock exhaust from a 450cc atv onto my 350cc atv. After rejetting of course. Would it not make much difference? Possibly be worst then stock because of too much flow?
-
07 grizzly 700fi runs rough,black smoke out the exhaust
Polarbear posted a topic in Yamaha ATV Forum
Hi everyone how are you.I have a 2007 yamaha grizzly 700efi .One day out of nowhere my atv started to run really rough.turns over fine but i need to press the throttle for it to start and hold it here and there so the atv does not stall out.it does not stay idling.its really choppy at low revs and as i press the throttle it gets better almost normal in high revs.i have the original exhaust and i drilled out the baffle in it for better flow and i also installed a stealth exhaust.stealth exhaust is a extra exhaust and it acts like a silencer.i also noticed lots of black smoke coming out the exhaust. i had this set up for 3-4 years with out a problem till about a year ago. i tried lot of things like: new spark plugs,different spark plugs,new k&n filter,ignition coil,adjusted the valve clearance,swapped ecu,checked all fuses,took stealth exhaust off,drained old gas and put new gas in,and so far had no luck the atv is not showing any error codes.if anyone can help that would be great,thank you. -
I am looking for a slip on exhaust for my 2008 scramble 500 4x4 i can not find one that fits can you help model # and brand would be great
-
I have a 2008 Kawasaki KFX 450R. Looking to put an exhaust onto it, since the stock one is getting some rust build up on it. I have a few questions though, since i would like to do it my self and not have to take it to an ATV shop. 1. If i was to buy a slip on exhaust for my KFX 450R, does anything else need to be done to my ATV besides just taking off the old pipe and installing the new one? 2. If i was to buy a brand new FULL exhaust for my KFX 450R, besides installing it what else needs to be done with the quad to have it run correctly? Is there any jets or anything that need to be adjusted? If so how do i got about doing that? Any feed back from anyone would be helpful...thanks
-
Starting a new thread on this topic. Installing an HMF Swamp series slip on. Needs to be jetted, so I took the bowl off and..stripped out the carb bowl screws, they're so damn soft. Had to leave it alone and order some screws, bowl gasket, and new air filter. Just waiting for the parts to come in.
-
Hello I just bought a new KFX 450R 2009 and have been looking for a exhaust for it I am looking at the Lexx Exhaust it is just a slip on but the stock head pipe is pretty good so I think that's all I need. Anyone have any input on the Lexx or any exhaust for the KFX?
-
Anyone ride this bike and have problems with how hot the exhaust gets? Mine glows red when I ride and the radiant heat is bad. Kawasaki says it's normal and the bike runs with the head pipe glowing? I don't but that. Any responses would be helpful.
-
Hi all, I recently picked up a 2003 Predator 500 for my wife with the Pure Polaris (White Brothers) slip on exhaust. The head pipe is stock and in pretty rough shape. I have tracked down a Big Gun head pipe for a decent price, but I need to know if the Big Gun head pipe will work with the Pure Polaris exhaust. Thanks in advance for your help Dan
-
Question for all you honda guys and gals-- I have a 09 honda rancher 420 and i am thinking about putting and exhaust shorkel on it for the deep water. I have an intake shorkel on it all ready but not really sure where to start or what i need to get or if it is even a good idea. Any advice would be a big help. Thanks:confused:
-
My dad said if I wanted a four wheeler I had to build it. Well it took me over a year to do it but now I am having troubles with the carubretor. My dad and I tried to rebuild it and we took our time doing it but the problems we are have are: we are getting exhaust blow out of the carburetor and exhaust out of the tailpipe it back fires at a high rpm and when we put the air box on the carburetor we have no acceleration. We have stop at a couple dealerships but they don't work on anything as old as my 88 warrior and have no idea. Can anyone help please. You can email me at [email protected] Tags: Rebuilt Engine Carburetor
-
My dad said if I wanted a four wheeler I had to build it. Well it took me over a year to do it but now I am having troubles with the carubretor. My dad and I tried to rebuild it and we took our time doing it but the problems we are have are: we are getting exhaust blow out of the carburetor and exhaust out of the tailpipe it back fires at a high rpm and when we put the air box on the carburetor we have no acceleration. We have stop at a couple dealerships but they don't work on anything as old as my 88 warrior and have no idea. Can anyone help please. You can email me at [email protected] Tags: Rebuilt Engine Carburetor
- 1 reply
-
- blowing
- carburetor
-
(and 1 more)
Tagged with:
-
Anyone have any input on what is the best full exhaust set up (header and muffler) for an 06' 400 EX? Looking to upgrade but there are many options with reviews that aren't very helpful. Also include info on what jet size i will be needing with the choosen exhaust. Looking at either a Pro Circuit or Yoshimura, but whatever anyone thinks, i'd appreciate the advice! Thanks!
-
First off im new here so hello to everybody, second a friend of mine has a 2000 400 ex that i am thinking about getting, and it was smoking really bad so we tore it down and the cylinder looked fine but the exhaust valv:huh:e had about a 1/8 inch of something that looked like carbon buildup but was white on it, could this be from burning oil , do u think it needs valve seats or seals or maybe just a set of rings, it runs fine just smokes and uses about a quart of oil in 8 hrs, thanks guys