Search the Community
Showing results for tags ' headlight'.
-
does any one know the color of the wire going to the headlight/kill switch that supplys the power from the stator to the switch. I am wanting to get power from a switched 12v source.
-
Hello everyone, This is my first post and i hope it's in the right section. Alright, i have a 2007 Suzuki LT-Z400 Quad Sport, and have a remote for my garage door, i already modified the remote so that it will open/close the door by only connecting two wires. Now i need help on finding the headlight wires on the ATV and connect the remote wires with it, so when i put the light on high it completes the circulation of the remote's wire. And is there a way to do this without cutting the wires on the ATV?
-
Hi guys, I was recently looking at a 2007 Honda 400ex. This quad has been bored out and modded and blah blah blah. I looked at it and noticed the valve timing was off (and resulted in tapping) as well as the brake lever was degreased. I was wondering a couple things about it just for personal preference plus I wanna hear what people have to say. First off the engine is bored after being ridden for about 1 1/2-2 years of riding (the bike wasn't purchased until 2010) and if for whatever reason the engine dies from something happening would I be able to eventually put a 450 engine in it. I understand these quads don't die (my uncle's '99 is still hauling as*) but I intend to race again eventually and wanted to see posibilities. Also, like many people, I prefer the older 400ex front plastics that have the double headlights. Are the mounting spots the same? I figured the headlights could be rewired but do the plastics mount the same? I apologize for noobish questions, I haven't ridden in years and at that time I didn't do much of the work myself. Let me know if there is anything I should be aware of on this model of quad or anything I may not know that I will need to soon! Thanks for reading! :elvis: :elvis: :elvis: :elvis:
- 4 replies
-
- 400ex
- bored engine
-
(and 5 more)
Tagged with:
-
I finally got around to installing my headlight bulbs among other atv chores. One head light bulb blew and the other came apart. I ordered 2 bulbs from ebay but the seller had mostly positive feedback. After my chores and lastly putting in the bulbs the left side is low beam only and the right side is high beam only. What am I missing?? The bulbs appeared to have 2 filaments. I have the wiring diagram in front of me and it shows one wire for low and one wire for hi and then the two bulbs are wired in parallel. so if one is on low the other one is too and vice versa. The quad is in the tow vehicle and isnt easy to move because I have no rims on it. When I put them on ill take the front plastic off. For now anyone have any idea?? Ebay Bulbs? Wiring? ground?