Search the Community
Showing results for tags ' stuck'.
-
[ame]https://www.youtube.com/watch?v=pklS4CBkETc[/ame]
-
Renegade, Scrambler 1000 rip (Stuck fest)
OutlawGade posted a topic in ATV Picture and Video Sharing
[ame]https://www.youtube.com/watch?v=iS510uZ1qaE[/ame] -
I cleaned my carb on my 160 1991 and then was using it for some mud. And when ever i would go full throttle it would jam open. I would have to kill it then push the arm of the throttle cable back into the carb. I would then be back in business. But i had it happen one more last time. I killed and was gonna try to push the cable back in but it was jammed. I took the carb apart and had to use a freakin screw drive to push the the needle out. The cable also got stretched some how so i cut the end off, took a bolt of the same size, cut the end off and used that as a new end for the cable. I kept is on by wrapping a wire around the cable and then soldering it. The shaft/sleeve thingy was full of dirt and mud so i sprayed carb cleaner in there and clean the sleeve and needle clean. I reinstalled the carb and everything and now the needle will not move...why wont it move??
-
Any ideas how to get the pivot bolt out on the swing arm. Tried blaster and nothing.
-
Cant get the 4 wheel to disengage. Any clues would be a great help. Thanks
-
- drive
- lta400 or f
-
(and 2 more)
Tagged with:
-
Starting a video of the week thing. Enjoy!
-
I am having a great winter with my new Sportsman 550 and plow. Today I plowed as usual and when I was just about finished, the plow would not go down and the winch is stuck. It wont budge. I cant remove the plow cause there is no slack. Any ideas on how to get things going again? The winch motor runs but I dont want to fool around with it since I dont want to do more harm than good. Thanks, folks.
-
I have a 99 BearTracker. As soon as I put the positive terminal on the battery it starts cranking over whether the key is on or not. Any Ideas?
-
What to do? Hi, I got a KLF300B, from a friend. By looking at explanations of vin's in a Clymer repair manual- I'm guessing a 1991 by the vin on engine, frame vin is not legible to read. Her teenage son did what he and I thought quads are for: running thru mud, puddles, etc. He said it was a big mud and Bayou got really down in it and stuck. It quit running and once it was pulled out of mud, it would not start, and hasn't started since that time. He said he drained the oil and muddy water came out as well. (its been sitting in garage for several months.) Any suggestions on fixing it? Where to start? or is the motor ruined and need to be replaced? I have a service/repair manual, but it does not address the engine at all. Also do you know where I can download a diagram of the motor and how it is mounted/connected, etc to see how easy or hard it would be to pull motor? Thank you so much for any and all suggestions, opinions, etc.
-
Hey all, not only new at this forum and posting stuff, kinda awkward with the whole computer thing. Anyway this dang quad is stuck in reverse and, it gets sorta old drivin' backwards!!!Is the trany problem similar in other models? Where do I get the best service manual? Thanks a bunch......Happy Quading
-
my kingquad 700 is stuck in 4 wheel drive with the diff locked and wont come out, anyone know what the problem could be?
- 9 replies
-
- 4wd or diff
- 700
-
(and 3 more)
Tagged with:
-
I have a 2000 Arctic Cat 300 that starts fine and runs fine at low rpms. It puts out black smoke and cuts out at high rpms. The plug looks black and fouled like it is running too rich. Putting the choke on when riding at the highest rpm it will run smoothly at seems to make no difference. I have taken the choke apart, and it seems to operate ok. Is there a way to "lube" the choke so it slides more easily? what am I missing?
-
This video was submitted to the QUADCRAZY Video section by Ajmboy. Description of Video: Brute Force stuck in mud Video Tags: brute force 750 stuck mud atv http://www.quadcrazy.com/video/video/&v=118073376440