Search the Community
Showing results for tags ' temp'.
-
I have 2002 450 foreman & the temp lite started to come on as I was riding; It would be intermittent at times. Changed the temp sensor, but lite still is intermittently on & off. Installed a switch for the fan so I could manually turn fan on & off as needed. The lite is still coming on & staying on . Any ideas on what else I could try? Thanks
-
The (haynes) service manual says to use "hi temp brake grease" on the front brake drum (water) seals that go the large circumference of the backing plate to seal against the drum. Is this the same as hi temp wheel bearing grease. Did a google search and found no decent reference to hi them brake grease. What to use?
-
Hi i have a 2012 kymco maxxer 375 . I noticed the temp light on lower left hand corner of the lcd screen . The light is on before i start the ayv on cold start ups and does go off .. What causes this and does anyone know a fix for it thanks
-
what temp should it be running i am putting a temp gauge on tomorrow and want to know bout what the temp should be my light has not came on but it seems that it is getting hot just the heat my fan it hooked to a toggle so it stays on the whole time it is running
-
I'm brand new to riding. Also brand new to fixing and/or maintaining a vehicle. I picked up a 2008 KFX a couple months ago and just realized that a wire was hanging. After downloading the owner's manual, I think I may have narrowed it down to the "Inlet Air Temperature Sensor". It fits in a slot underneath the seat, in the air filter housing. I'm not sure how long it's been unplugged and, honestly, I have no idea what it does. How important is this piece? I'm going to the track this weekend. I'm not even sure how to reattach it. Any help is greatly appreciated. Videos here: [ame]http://www.youtube.com/watch?v=kvoRJexYDYc[/ame] [ame]http://www.youtube.com/watch?v=NRLYFFfu-Mw[/ame]
-
New to the forum---wondered if anyone had any thoughts on my start problem: All summer, my old 87 Suzuki starts great. Once the weather starts to cool, when I push the start button, i get nothing but a click. Maybe the 5th to 8th push, I may get a start out of it. Once running and warm, it starts fine all day. Next day...same issue (if it's a cool day) . Any ideas would be appreciated. Thanks!
-
Does anyone know what the normal water temp should be on a Banshee?