Search the Community
Showing results for tags 'button'.
-
So I went through the top end and then put everything back together and did break in and then probably 3-4 rides. Now my start button doesnt work but i can jump the solenoid and it starts right up. I looked for bad connects and didnt see any. I then replaced the coil and got nothing. So before i blow more money on something i dont know if it will work, i would like your guys opinion on what it would be. Thanks. Oh and it is a suzuki 160 '91
-
Ok..I have the key for main ignition..for some reason, my push button isn't working..I have replaced starter solenoid, start circuit relay, new battery..when I turn the key on, I have 12 volts on the right side of my solenoid, not getting any voltage from the small blue/white stripe wire on the bottom of relay..assuming may be problem with one of the safeties..I can pull start everytime, I can jump solenoid with screwdriver, wrench, etc, and it starts everytime..so I just want to run a new aftermarket push button switch..my question is exactly how to do it..would I just run one wire the the small red/white wire on the bottom of solenoid, and run the other wire(from push button) to the small blue/white wire on bottom of solenoid?..I plan on using 14 guage wire, and I ordered a momentary , waterproof, push button..I plan on just drilling a hole between the key switch and reverse knob and installing it there..would like my e start working before winter hits
-
We've added the abilty for you to have your own "online" or "offline" status button that you can put anywhere on the web, to show your active status and support of this community. Click Here We've added code that you can use in other forums (signatures), myspace, facebook, and any other site that you take part in. By adding your status button on other sites, your helping spread the word about QUADCRAZY! Example: In my signature.........