Search the Community

I recently did an oil change and spark plug replacement on my quad, and it wouldn't start immediately after changing the oil. I did a compression test and had 30 PSI. what could that indicate? I also do not have a leak down tester.

I bought a 2008 Suzuki LTZ 400, and right away noticed it wasn't wanting to shift into 3rd well, if at all. I opened my clutch basket, and a little piece of a gear fell out. A friend helped me strip the motor down, and ended up changing 4th gear (that's where the piece was from) and I believe third gear drive. He said everything else looked good, so I put the bike back together and started it up for a test ride. Right away, I noticed the same shifting issue, first and second go right in, but doesn't want to go into third. The other issue that may be related, is I have a hard time finding neutral. Most of the time it goes right from first to second, and I have to lightly click down for neutral, and it takes a few tries. Please give me any advice for things to look at, or reasons I would still be having this issue after changing gears. Maybe the original problem is what caused third gear to break in the first place?

Any suggestions on where to buy new parts want new jug piston rings would like to go wiesco big bore

So i was riding the other day and my quad randomly shut off. It started back up and ran completely fine for a little while and then it started idling terribly. I cleaned the carb and changed all the jets and everything except the float due to the rebuild kit not coming with one and it actually runs worse then it did before. It will run and idle decent now but when I give it gas it dies. Does anybody know what could be wrong? I also changed the spark plug and air filter along with the oil and oil filter.