Alberta

Sorry for the late response, been busy with work.  I've literally checked over all components to see if they're with in range of spec as well tested the cdi in a running machine. Still no luck. 

To also add I've checked through the harness and connectors best I can for both continuity and resistance along with checked all the grounding points in the harness along with the grounds to chassis

First thing I checked as I've had lots of machines come to me with no ignition and was the culprit.  Usually pretty good with troubleshooting electrical especially on the Yami's and Honda's but this ones got me stumped. 

Hi everyone, been using these forums for quite some time as they're an immense help and tons of good info but am at a loss with this machine...

Have an 09 Big Bear with no fire.  Have run through the normal ohm tests and bypassing/ruling out components.  

-stator/pick up are within spec

-coil within spec 

-good CDI from running machine

Was able to get specs for components by crossing them to older models through parts fiches

Any help would be greatly appreciated!