etsbigbear

Frank, 

You are correct! The seal fail on the starter and oil gained entry and ate the brushes. Bought a kit for 15 dollars works like a champ.

Thanks for you help!

Trent

Okay so I had a chance to troubleshoot today. I took the starter selenoid off and touched the wires together several times. A couple of those time it cranked over but did not start because I broke the connection after a couple engine turnovers.

I could not get it to crank again so I took the battery down to get tested as the couple times it turned it seemed sluggish like a weak battery. The battery tested very good.

So after trying to jump the starter to no avail I removed the starter and jumped it with the removed battery and I was successful getting the starter to crank b bu t not every time. It did spin more often than not. So I put everything back on and tried the e start and nothing but a click each time so I used my circuit tester (light) to see if I had juice to the starter when I pressed the start. Yes. Even checked the selenoid which was obvious it worked otherwise I wouldn't have power at the starter. 

Starter just wont crank when it's on the atv! Called a local starter repair shop and they are ordering me $4.50 brushes as this is their guess. I will change those and if it doesnt work I will replace the starter with new.

Question.....does this sound like i have narrowed it down? Could there be another issue? Like i said I even tested the e start button with the light by testing down current of the starter selenoid and ther was power. 

I was also able to start the big bear with the pull start today without losing an upper limb🙄

I have not had a chance to get involved with my issue yet but I did try to start today as I like to run my machines every few days. 

So my big bear turned over a couple times and I let off the button. Hit it again and it turned over a couple times. Let off the button and hit it again and only heard a clicking under the seat which sounded like it was on the right side. Anyway I tried to pull start and could never find a spot where the compression didn't want to RIP my arm out of socket. My questions are:

1. Whith this now happening with a cold engine and charged battery does this help to elucidate what may be the problem?

2. Is there a trick to off load the compression for the pull start?

Thanks again!

Thanks,

I will try the tester first. I will report back what I find

Thanks again!

I am having a problem starting also but my issue is that when my 1989 350 big bear is cold the electric start works fine. After riding it for a while (engine is hot) and I turn it off, the e start no longer cranks. I can pull start but not e start. Will the above trouble shooting still apply or might there be a more apparent solution to this issue. 

Thanks in advance!