Check the start switch. Trace the wires from the left handlebar to down to the connectors. Disconnect the 6-pin connector. Set the multimeter to ohms of resistance. Touch the one probe to the black wire terminal and the other to the blue/black wire terminal. There should be continuity when the switch is pushed down and no continuity when the when the switch let off.
Thanks ATVmechanic for the advice above. I am having the same problem - no spark. Concerning the Start Switch - I assume you mean the momentary push button start switch. I found the 6 pin connector and used a multimeter to measure ohms. There is infinite resistance (no continuity) whethere I push the switch or not. But the push button does turn over the quad. Any ideas as to next step? Greatly appreciated!
2006 yamaha raptor 350 electrial testing
in Yamaha ATV Forum
Posted
Thanks ATVmechanic for the advice above. I am having the same problem - no spark. Concerning the Start Switch - I assume you mean the momentary push button start switch. I found the 6 pin connector and used a multimeter to measure ohms. There is infinite resistance (no continuity) whethere I push the switch or not. But the push button does turn over the quad. Any ideas as to next step? Greatly appreciated!