Quantcast
Jump to content

Recommended Posts

Posted

Theyre not race machines, but Im pretty content with my CForce 800XC.

The most consistent thing I have seen reading other peoples stories and issues seem to be centered around how well specific dealers do the pre flight work on them.

Or in how well folks follow the break in on them.

 

 

  • Like 1
Posted

I bought a used CForce 500 for my wife a couple years ago. The previous owner neglected some maintenance items but once those were addressed it was a good machine. Last fall we decided to upgrade and bought two new CFMoto CForce 600. They are not the quality of a Yamaha, but the features you get for the price make them a good recreational atv. We are very happy with CFMOTO.

Posted
7 hours ago, 406offroad said:

I bought a used CForce 500 for my wife a couple years ago. The previous owner neglected some maintenance items but once those were addressed it was a good machine. Last fall we decided to upgrade and bought two new CFMoto CForce 600. They are not the quality of a Yamaha, but the features you get for the price make them a good recreational atv. We are very happy with CFMOTO.

Agreed. Not quite "top end" quality, but . . most of what Ive seen is readily upgradeable. Should have mentioned from a mechanics point of view the fit of the engine on mine is, well, visibly it is top notch. no sprue or slag, not inclusions in the metal, nice surface finish and that extends to the valve covers which are heavy flexible (ABS?) with a wide multi ribbed neoprene seal. The seat on mine is pretty decent as well. I've spent a number of long days in it already and have yet to get saddle sore. Think "cruiser" level but not "dresser" comfortable.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By RGS
      1989 Moto 4 YFM350ERW intermittent spark.
      Quad has set for about 7 years and was running when parked.  When I replaced the battery and attempted to start it had no spark. 
       
      What I have done.  Followed troubleshooting in the manual. 
      1.       Coil failed the resistance check so I replaced it.  Still no spark.
      2.       I performed resistance checks on the stator and they all pass.
      3.       Found a bad rear brake stop switch and unplugged it and connected the wires in order to disable.  Now I have intermittent spark.  I believe that the issue is with either the stator or CDI and not sure which.
      1989 seems to be a transition year for electrical.  I can get new aftermarket CDI units for 87-88 and 90-94.  I cannot get ones for a 89.  I can get new stators for 87-89 and 90-95.  Looking at the schematics the wiring on my moto is closer to the 90 ones on the ATV side of the CDI and closer to the 87-88 on the stator side of the CDI.  Looking at part supply sources the stator housing is the same part # for all the years and looking at some of the stators on Amazon that have the dimensions on them both of the stators are the same size.
      What I am thinking of doing is to replace the stator and CDI with a 90-95 one as these parts are all readily available.   Does anyone know if this has been tried before and if there are any issues with doing this.  
       As a side note I also have a 1993 Moto 4 YFM350ER that has been sitting longer but it is located about 400 miles from me at this time.  By doing this change in addition to being able to get parts I will also have 2 ATV’s that are the same electrically. 
    • By BuckBilly
      Good morning to all !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
      Let's see if we can make this a daily event.
    • By Gwbarm
      Does anyone have a recommendation of a really Heavy Duty ATV cover. I have bought several and they do keep the water off somewhat, but they are very thin and do not contour with the shape very well and water pools up in the rack louvers. I think i may be looking for a heavy canvas one, if anyone has a recommendation it would be greatly appreciated.
    • By AnthonyT
      In search of my first ATV? What are good older 4x4 models?
    • By 1998Zuki250
      Looking to see if anyone has any input on ATV Tires? 1998 Suzuki quadrunner LTF250
×
×
  • Create New...