CFMoto CForce 1000 2022 graphics templates
-
Similar Forum Topics
-
By HHurks
Yesterday I got a UForce 1000 as my first bike and I am wondering if there are any owners that could advise where I can find budget parts and accessories for it.
I tried looking StarknightMT, but the filtering is a bit unreliable, so direct links or exact names are much appreciated.
I'm mostly interested in sliders and side cases, but any advices for "must haves" are welcomed.
Thank you!
-
By Dutchaaron
New to the site. Im rebuilding a Kawasaki Bayou 300. The wiring is my biggest challenge.
-
-
-
By tflack500tbx
Background,
This winter (Dec.) I was plowing and everything just died, just quit. No lights, no pull start, No nothing. I've had this problem before and I changed the voltage reg and it ran fine for over a year. Then this. So I changed it again, thinking this was the same problem. Tried to start it and a small pin hole in the CDI appeared with electrical smoke.
Months go by and I finally decide to just replace parts (I'm Horrible at electrical issues). I changed the stator, new CDI, new Voltage reg, new starter solenoid, tested the starter (prefect), charged the battery.
Went to start it and the solenoid rapidly clicked. All the dash lights on, headlights work. Pull stared it and it fired right up no issues. Looked into the rapidly clicking starter solenoid and it was not enough juice in the battery. Took the battery completely out and hooked up a jump box to it turned the key, light on, everything looks good. Pushed the starter button and it fired right up ran great. Turned it off to test it again, Turned the key and nothing. No dash lights nothing. Took the jump box off and pulled started it. Started it right up. Re-hooked the jump box, still nothing.
Any Ideas?
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.