-
Popular Now
-
Similar Forum Topics
-
By DaveswMN
Pulled my '86 Moto4 out of shed where it sat for 20 years. I knew it smoked. checked it over a little put in gas and it fired right up!!
Drove about 100 yards, ran about half throttle wouldn't idle. Put on somenew parts, jug/piston and rings, carb and valve seals.
'went together ok, tuned it over by hand about 6 revs whick went well. Hit the starter it fired for about 6 revs and quit. tried it again fired once and then th sound of something slipping like maybe chain slipping over spoket.
Took cover off to watch cam sproket, hit starter again, heard same noise and the cam sproket was not turning but jumping a bit. Chain was still tight. You will probably tell me I need to split the lower case but hoping there mightbe something else.
I don't fully understand the chain tightener, the plunger only moves about 1/4 inch, should it move much more than that when off the motor and compressing it by hand?
Thanks for any thoughts.
-
By dvs1961
Just bought a new hisun ,been shopping for a year or more for a sxs best bang for the buck...Are there any lift kits out there for a 2022 Hisun 750 sector ? links thanks
-
By autocustomizer76
Hey all got a Kawasaki 300 that's seen better days I'm looking to get running. But first, I'm working on a Honda 350 ES and mainly needing where are you all finding quality parts at good prices. Atvs are really hot items around here right now and most of the folks wanting and needing them are not familiar with working on them. I'm looking to find a good resource for information and if it works out well pass this group along to the folks I help to get them in the know how to get the most out of their machines. Thanks in advance.
-
By blasirl
I have inherited an ATV and I think it was purchased in KY, but I am in WI. Is there a way to do an online search using the VIN or what have you to try and find the last registered owner so that I might try to get the title?
-
By blasirl
I have found a few useful posts and am looking for a way to bookmark them in the forum. Is there a way to do this?
-

Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.