Quantcast
Jump to content


terry001

Members
  • Posts

    12
  • Joined

  • Last visited

Posts posted by terry001

  1. hey guys

    quad won't start. I rolled it yesterday and it cut off. Would not restart. Starter motor just spins. Not turning the crank. Could I have broken the crank shaft keyway?

    It will not start by pulling it either.

    What do you guys think.

  2. new problem

    I flipped my ride. lol

    won't start now. sounds like the starter won't engage. (zinging sound)

    I pull start it, still sounds like start not engauging.

    ran great before I flipped it

  3. I was riding the other day when the atv just lost power. Starts up fine but no power. Has rocker noise so i pulled the valver cover off to check rockers. One Rocker looked loose. I pulled the head off to check the valve. Looks a little weird but not out off the ordinary. Any ideas. I put compress air to engine and sound some air is coming through the head.

  4. hello riders

    Picked the atv up not running. owner did know not why it wouldn't start.(kinda fishy) tore it all down. previous owner put brand new piston in it and gasket set. No marks on the piston so it wasn't running after he rebuilt top end. someone been in it. LOL. checked rings. all ok. Valves are seated.timing dead on.

    put it all back together.

    Well the 2002 honda 400ex still won't start. Went through everything again.

    The spring and plunger for the decompression cam is missing. Will this make it not start. Has the stock cam in it.

    What do you guys and gals think????

  5. i would take the carb off and give it a really good cleaning, check the needle and seat at the float and make sure needle has a nice point ... i would remove as much as i could with the inards and clean thoroughly using a stripped twist tie to get everything cleared out ... lots of spray carb clean and if you have a compressor to blow it all out, all the better ...

    Thanks for the response

    I cleaned the carb pretty good. I forgot to mention that I pulled the quad behind the truck and still no start. I'm a pretty good tech but damn this thing has got me stuck.

  6. Hello fellow riders. new to this. I have a 2002 Honda 400ex. Just picked up. It will not start. Owner said it was running a few days ago.(LOL). Quad was all together when picked up. spits and sputters and back fires.

    This is what I have done.

    #1-checked fuel--OK-Spayed starting fluid--no start

    #2-check spark--OK

    #3-check compression-100-110psi

    #4-Pulled valve cover off and check timing. Timing good. top dead and cam at two lines even with head.

    #5-doubled checked timing again-OK

    #6-6 of 8 bolts holding valve cover stripped.Don't know if this affects anything.

    #7-decompression seems to be working-only rotates one direction. Manual dosen't seem to say much on it works.

    Any advise would greatly help

    Thanks

    Eger rider

×
×
  • Create New...