chadburgess2003
-
Posts
2 -
Joined
-
Last visited
Content Type
Profiles
Forum
Gallery
ATV Magazine
Events Calendar
Downloads
Store
Community Map
Posts posted by chadburgess2003
-
-
Ok so I have a recon 250 that will not idle. It will rev up and go as long as u don't let it idle it will run fine. Fist thought to everyone I know would be the idle jet. Cleaned the carb and put a kit in it while I was there. Changed the spark plug as well. These carbs have that fuel cut off vacuum valve on it. If I take the line that's coming from the intake and plug it off it will idle just fine with no problem. I know its not how its pos to be but I just cant figure anything out on it. Im at a lost. Any suggestions would be appreciated. O Ive already checked the valves and also adjusted the air. Its got to be something with the vacuum operated valve whatever it is or does... Thanks.
Yamaha bigbear no spark
in Yamaha ATV Forum
Posted
Ok so I have a Yamaha big bear that will not spark a lick. Ive checked everything I know to check on this thing can cant locate the problem. The only way I can get it to start and run is to jump the two back wires coming off the key switch theres 4 wires on the key switch. If I jump them two it will start and run great but it will not die when I turn the switch off the only way I can kill the motor is to turn the engine stop/run switch off. If it was mine id run the heck out of it that way but its a older friend of mine and I would rather have the key switch operating correctly. I have already replaced the key switch with 2 different switches and it does the same thing. I have also replaced the cdi and still has not changed anything. I would highly appreciate any advise I am at a lost on this thing. thanks